Abstract: A new technical prototype for producing Fe-6.5wt% Si electrical steel sheets by directional solidification, heat treatment before rolling, warm rolling, and cold rolling was proposed in the present study. The formability of Fe-6.5wt% Si electrical steel before rolling and the reasonable process parameters of this technical prototype were obtained. Experimental results reveal that the formability of Fe-6.5wt% Si electrical steel is improved significantly under the combination of directional solidification and heat treatment before rolling. Fe-6.5wt% Si electrical steel sheets with the thickness of 0.15 mm, bright surface, few edge cracks, and high rolling yield can be successfully fabricated using this technology without any intermediate annealing during the whole rolling. The combination of directional solidification, heat treatment before rolling, warm rolling, and cold rolling can work as a new process for highly efficient and compact fabrication of Fe-6.5wt% Si electrical steel sheets.