Precipitation and control of BN inclusions in 42CrMo steel and their effect on machinability

Yu-nan Wang; Yan-ping Bao; Min Wang; Le-chen Zhang

doi:10.1007/s12613-013-0805-5

Volume 20 Issue 9

Sep. 2013

Turn off MathJax

数据统计

计量

文章访问数: 223
HTML全文浏览量: 58
PDF下载量: 11
被引次数: 0

文章导航 > 矿物冶金与材料学报（英文） > 2013 > 20(9): 842-849

Yu-nan Wang, Yan-ping Bao, Min Wang, and Le-chen Zhang, Precipitation and control of BN inclusions in 42CrMo steel and their effect on machinability, Int. J. Miner. Metall. Mater., 20(2013), No. 9, pp. 842-849. https://doi.org/10.1007/s12613-013-0805-5

Cite this article as:

Yu-nan Wang, Yan-ping Bao, Min Wang, and Le-chen Zhang, Precipitation and control of BN inclusions in 42CrMo steel and their effect on machinability, Int. J. Miner. Metall. Mater., 20(2013), No. 9, pp. 842-849. https://doi.org/10.1007/s12613-013-0805-5

Citation:

PDF( 1024 KB)

引用本文 PDF XML SpringerLink

Precipitation and control of BN inclusions in 42CrMo steel and their effect on machinability

State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing, 100083, China
School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing, 100083, China
National Engineering Research Center of Flat Rolling Equipment, University of Science and Technology Beijing, Beijing, 100083, China

通讯作者:
Yan-ping Bao E-mail: baoyp@ustb.edu.cn

中文摘要

The precipitation and control of boron nitrogen (BN) inclusions in 42CrMo steel were investigated and their effect on machinability was analyzed. First, the precipitation regularity of BN in 42CrMo steel was studied by theoretical calculation. Then, the machinability of the steel was investigated through contrast cutting experiments, and the composition and cooling rate of the steel were controlled to analyze the variation laws of the size, distribution, and area ratio of BN inclusions. Finally, the results were combined with the machinability of the steel to analyze the relationship among them. It is found that the machinability of the steel is mainly influenced by the diameter and quantity of BN inclusions. Fine and dispersedly distributed BN inclusions are more beneficial for the improvement in machinability of 42CrMo steel than coarse and sparse BN inclusions.

关键词:

Precipitation and control of BN inclusions in 42CrMo steel and their effect on machinability

+ Author Affiliations

Abstract

Abstract

The precipitation and control of boron nitrogen (BN) inclusions in 42CrMo steel were investigated and their effect on machinability was analyzed. First, the precipitation regularity of BN in 42CrMo steel was studied by theoretical calculation. Then, the machinability of the steel was investigated through contrast cutting experiments, and the composition and cooling rate of the steel were controlled to analyze the variation laws of the size, distribution, and area ratio of BN inclusions. Finally, the results were combined with the machinability of the steel to analyze the relationship among them. It is found that the machinability of the steel is mainly influenced by the diameter and quantity of BN inclusions. Fine and dispersedly distributed BN inclusions are more beneficial for the improvement in machinability of 42CrMo steel than coarse and sparse BN inclusions.
- steel;
- inclusions;
- boron nitrogen;
- precipitation;
- machinability