留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 23 Issue 6
Jun.  2016
数据统计

分享

计量
  • 文章访问数:  312
  • HTML全文浏览量:  81
  • PDF下载量:  13
  • 被引次数: 0
V. G. Efremenko, K. Shimizu, A. P. Cheiliakh, T. V. Pastukhova, Yu. G. Chabak,  and K. Kusumoto, Abrasive resistance of metastable V–Cr–Mn–Ni spheroidal carbide cast irons using the factorial design method, Int. J. Miner. Metall. Mater., 23(2016), No. 6, pp. 645-657. https://doi.org/10.1007/s12613-016-1277-1
Cite this article as:
V. G. Efremenko, K. Shimizu, A. P. Cheiliakh, T. V. Pastukhova, Yu. G. Chabak,  and K. Kusumoto, Abrasive resistance of metastable V–Cr–Mn–Ni spheroidal carbide cast irons using the factorial design method, Int. J. Miner. Metall. Mater., 23(2016), No. 6, pp. 645-657. https://doi.org/10.1007/s12613-016-1277-1
引用本文 PDF XML SpringerLink

Abrasive resistance of metastable V–Cr–Mn–Ni spheroidal carbide cast irons using the factorial design method

  • 通讯作者:

    V. G. Efremenko    E-mail: vgefremenko@mail.ru

  • Full factorial design was used to evaluate the two-body abrasive resistance of 3wt%C–4wt%Mn–1.5wt%Ni spheroidal carbide cast irons with varying vanadium (5.0wt%–10.0wt%) and chromium (up to 9.0wt%) contents. The alloys were quenched at 920℃. The regression equation of wear rate as a function of V and Cr contents was proposed. This regression equation shows that the wear rate decreases with increasing V content because of the growth of spheroidal VC carbide amount. Cr influences the overall response in a complex manner both by reducing the wear rate owing to eutectic carbides (M7C3) and by increasing the wear rate though stabilizing austenite to deformation-induced martensite transformation. This transformation is recognized as an important factor in increasing the abrasive response of the alloys. By analyzing the regression equation, the optimal content ranges are found to be 7.5wt%–10.0wt% for V and 2.5wt%–4.5wt% for Cr, which corresponds to the alloys containing 9vol%–15vol% spheroidal VC carbides, 8vol%–16vol% M7C3, and a metastable austenite/martensite matrix. The wear resistance is 1.9–2.3 times that of the traditional 12wt% V–13wt% Mn spheroidal carbide cast iron.
  • Abrasive resistance of metastable V–Cr–Mn–Ni spheroidal carbide cast irons using the factorial design method

    + Author Affiliations
    • Full factorial design was used to evaluate the two-body abrasive resistance of 3wt%C–4wt%Mn–1.5wt%Ni spheroidal carbide cast irons with varying vanadium (5.0wt%–10.0wt%) and chromium (up to 9.0wt%) contents. The alloys were quenched at 920℃. The regression equation of wear rate as a function of V and Cr contents was proposed. This regression equation shows that the wear rate decreases with increasing V content because of the growth of spheroidal VC carbide amount. Cr influences the overall response in a complex manner both by reducing the wear rate owing to eutectic carbides (M7C3) and by increasing the wear rate though stabilizing austenite to deformation-induced martensite transformation. This transformation is recognized as an important factor in increasing the abrasive response of the alloys. By analyzing the regression equation, the optimal content ranges are found to be 7.5wt%–10.0wt% for V and 2.5wt%–4.5wt% for Cr, which corresponds to the alloys containing 9vol%–15vol% spheroidal VC carbides, 8vol%–16vol% M7C3, and a metastable austenite/martensite matrix. The wear resistance is 1.9–2.3 times that of the traditional 12wt% V–13wt% Mn spheroidal carbide cast iron.
    • loading

    Catalog


    • /

      返回文章
      返回