Dripping and evolution behavior of primary slag bearing TiO<sub>2</sub> through the coke packed bed in a blast-furnace hearth

Yan-xiang Liu; Jian-liang Zhang; Zhi-yu Wang; Ke-xin Jiao; Guo-hua Zhang; Kuo-chih Chou

doi:10.1007/s12613-017-1387-4

Volume 24 Issue 2

Feb. 2017

Turn off MathJax

数据统计

计量

文章访问数: 509
HTML全文浏览量: 83
PDF下载量: 12
被引次数: 0

文章导航 > 矿物冶金与材料学报（英文） > 2017 > 24(2): 130-138

Yan-xiang Liu, Jian-liang Zhang, Zhi-yu Wang, Ke-xin Jiao, Guo-hua Zhang, and Kuo-chih Chou, Dripping and evolution behavior of primary slag bearing TiO₂ through the coke packed bed in a blast-furnace hearth, Int. J. Miner. Metall. Mater., 24(2017), No. 2, pp. 130-138. https://doi.org/10.1007/s12613-017-1387-4

Cite this article as:

Yan-xiang Liu, Jian-liang Zhang, Zhi-yu Wang, Ke-xin Jiao, Guo-hua Zhang, and Kuo-chih Chou, Dripping and evolution behavior of primary slag bearing TiO2 through the coke packed bed in a blast-furnace hearth, Int. J. Miner. Metall. Mater., 24(2017), No. 2, pp. 130-138. https://doi.org/10.1007/s12613-017-1387-4

Citation:

PDF( 7336 KB)

引用本文 PDF XML SpringerLink

研究论文

Dripping and evolution behavior of primary slag bearing TiO₂ through the coke packed bed in a blast-furnace hearth

State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China
School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China
Baogang Zhanjiang Iron and Steel Co. Ltd., Zhanjiang 524000, China

通讯作者:
Ke-xin Jiao E-mail: jiaokexin_ustb@126.com

中文摘要

To investigate the flow of primary slag bearing TiO₂ in the cohesive zone of blast furnaces,experiments were carried out based on the laboratory-scale packed bed systems.It is concluded that the initial temperature of slag dripping increases with decreasing FeO content and increasing TiO₂ content.The slag holdup decreases when the FeO content is in the range of 5wt%-10wt%,whereas it increases when the FeO content exceeds 10wt%.Meanwhile,the slag holdup decreases when the TiO₂ content increases from 5wt% to 10wt% but increases when the TiO₂ content exceeds 10wt%.Moreover,slag/coke interface analysis shows that the reaction between FeO and TiO₂ occurs between the slag and the coke.The slag/coke interface is divided into three layers:slag layer,iron-rich layer,and coke layer.TiO₂ in the slag is reduced by carbon,and the generated Ti diffuses into iron.

关键词:

Research Article

Dripping and evolution behavior of primary slag bearing TiO₂ through the coke packed bed in a blast-furnace hearth

+ Author Affiliations

Abstract

Abstract

To investigate the flow of primary slag bearing TiO₂ in the cohesive zone of blast furnaces,experiments were carried out based on the laboratory-scale packed bed systems.It is concluded that the initial temperature of slag dripping increases with decreasing FeO content and increasing TiO₂ content.The slag holdup decreases when the FeO content is in the range of 5wt%-10wt%,whereas it increases when the FeO content exceeds 10wt%.Meanwhile,the slag holdup decreases when the TiO₂ content increases from 5wt% to 10wt% but increases when the TiO₂ content exceeds 10wt%.Moreover,slag/coke interface analysis shows that the reaction between FeO and TiO₂ occurs between the slag and the coke.The slag/coke interface is divided into three layers:slag layer,iron-rich layer,and coke layer.TiO₂ in the slag is reduced by carbon,and the generated Ti diffuses into iron.
- blast furnace slag;
- titanium dioxide;
- packed beds;
- dripping

FullText(HTML)

Supplements(0)

References(30)

References

[1]	X.L. Wang, Ferrous Metallurgy (Ironmaking), The Metallurgy Industry Press, Beijing, 2000.
[2]	M.W. Chapman, B.J. Monaghan, S.A. Nightingale, J.G. Mathieson, and R.J. Nightingale, The effect of sulfur concentration in liquid iron on mineral layer formation during coke dissolution, Metall. Mater. Trans. B, 42(2011), No. 4, p. 642.
[3]	A.K. Biswas, Principles of Blast Furnace Ironmaking:Theory and Practice, Cootha Publishing House, Brisbane, 1981.
[4]	H.L. Shulman, C.F. Ullrich, and N. Wells, Performance of packed columns:I. Total, static, and operating holdups, AlChE J., 1(1955), No. 2, p. 247.
[5]	S.J. Chew, G.X. Wang, A.B. Yu, and P. Zulli, Experimental study of liquid flow in blast furnace cohesive zone, Ironmaking Steelmaking, 24(1997), No. 5, p. 392.
[6]	S.J. Chew, P. Zulli, and A.B. Yu, Modelling of liquid flow in the blast furnace:theoretical analysis of the effects of gas, liquid and packing properties, ISIJ Int., 41(2001), No. 10, p. 1112.
[7]	H. Kawabata, Z. Liu, F. Fujita, and T. Usui, Characteristics of liquid hold-ups in a soaked and unsoaked fixed bed, ISIJ Int., 45(2005), No. 10, p. 1466.
[8]	H. Kawabata, K. Shinmyou, T. Harada, and T. Usui, Influence of channeling factor on liquid hold-ups in an initially unsoaked bed, ISIJ Int., 45(2005), No. 10, p. 1474.
[9]	K. Saito, K.I. Ohno, T. Miki, Y. Sasaki, and M. Hino, Behavior of ironmaking slag permeation to carbonaceous material layer, ISIJ Int., 46(2006), No. 12, p. 1783.
[10]	G.S. Gupta and K. Naveen, Quantification of liquid holdup in the dropping zone of a blast furnace:a cold model study, Metall. Mater. Trans. B, 38(2007), No. 2, p. 203.
[11]	Y. Bando, S. Hayashi, A. Matsubara, and M. Nakamura, Effects of packed structure and liquid properties on liquid flow behavior in lower part of blast furnace, ISIJ Int., 45(2005), No. 10, p. 1461.
[12]	W.M. Husslage, T. Bakker, A.G.S. Steeghs, M.A. Reuter, and R.H. Heerema, Flow of molten slag and iron at 1500℃ to 1600℃ through packed coke beds, Metall. Mater. Trans. B, 36(2005), No. 6, p. 765.
[13]	Y.L. Cao, Y.W. Dong, Z.H. Jiang, H.B. Cao, D. Hou, and Q.L. Feng, Research on droplet formation and dripping behavior during the electroslag remelting process, Int. J. Miner. Metall. Mater., 23(2016), No. 4, p. 399.
[14]	H.L. George, R. Longbottom, S. Chew, D. Pinson, and B. Monaghan, Characterisation of coke packed beds after liquid slag flow at 1500℃ by image analysis, ISIJ Int., 54(2014), No. 8, p. 1790.
[15]	M. Shin, J.S. Oh, and J. Lee, Carburization, melting and dripping of iron through coke bed, ISIJ Int., 55(2015), No. 10, p. 2056.
[16]	D. Jang, M. Shin, J.S. Oh, H.S. Kim, S.H. Yi, and J. Lee, Static holdup of liquid slag in carbonaceous beds, ISIJ Int., 54(2014), No. 6, p. 1251.
[17]	S. Natsui, T. Kikuchi, R.O. Suzuki, T. Kon, S. Ueda, and H. Nogami, Characterization of liquid trickle flow in poor-wetting packed bed, ISIJ Int., 55(2015), No. 6, p. 1259.
[18]	J.R. Kim, Y.S. Lee, D.J. Min, S.M. Jung, and S.H. Yi, Influence of MgO and Al₂O₃ contents on viscosity of blast furnace type slags containing FeO, ISIJ Int., 44(2004), No. 8, p. 1291.
[19]	Y.S. Lee, D.J. Min, S.M. Jung, and S.H. Yi, Influence of basicity and FeO content on viscosity of blast furnace type slags containing FeO, ISIJ Int., 44(2004), No. 8, p. 1283.
[20]	P.A. Tanskanen, S.M. Huttunen, P.H. Mannila, and J.J. Härkki, Experimental simulations of primary slag formation in blast furnace, Ironmaking Steelmaking, 29(2002), No. 4, p. 281.
[21]	H. Park, J.H. Park, G.H. Kim, and I. Sohn, Effect of TiO₂ on the viscosity and slag structure in blast furnace type slags, Steel Res. Int., 83(2012), No. 2, p. 150.
[22]	C. Feng, M.S. Chu, J. Tang, J. Qin, F. Li, and Z.G. Liu, Effects of MgO and TiO₂ on the viscous behaviors and phase compositions of titanium-bearing slag, Int. J. Miner. Metall. Mater., 23(2016), No. 8, p. 868.
[23]	G.H. Zhang, Y.L. Zhen, and K.C. Chou, Influence of TiC on the viscosity of CaO-MgO-Al₂O₃-SiO₂-TiC suspension system, ISIJ Int., 55(2015), No. 5, p. 922.
[24]	Y.L. Zhen, G.H. Zhang, and K.C. Chou, Viscosity of CaO-MgO-Al₂O₃-SiO₂-TiO₂ melts containing TiC particles, Metall. Mater. Trans. B, 46(2015), No. 1, p. 155.
[25]	K.X. Jiao, J.L. Zhang, Z.J. Liu, M. Xu, and F. Liu, Formation mechanism of the protective layer in a blast furnace hearth, Int. J. Miner. Metall. Mater., 22(2015), No. 10, p. 1017.
[26]	W. Zhao, M.S. Chu, H.T. Wang, Z.G. Liu, and Y.T. Tang, Novel blast furnace operation process involving charging with low-titanium vanadium-titanium magnetite carbon composite hot briquette, Int. J. Miner. Metall. Mater., 23(2016), No. 5, p. 501.
[27]	M.W. Chapman, B.J. Monaghan, S.A. Nightingale, J.G. Mathieson, and R.J. Nightingale, Observations of the mineral matter material present at the coke/iron interface during coke dissolution into iron, ISIJ Int., 47(2007), No. 7, p. 973.
[28]	B.J. Monaghan, M.W. Chapman, and S.A. Nightingale, Carbon transfer in the lower zone of a blast furnace, Steel Res. Int., 81(2010), No. 10, p. 829.
[29]	S.S. Gornostayev, T.M.J. Fabritius, O. Kerkkonen, and J.J. Härkki, Fe-Si droplets associated with graphite on blast furnace coke, Int. J. Miner. Metall. Mater., 19(2012), No. 6, p. 478.
[30]	K.J. Li, J.L. Zhang, Z.J. Liu, M. Barati, J.B. Zhong, M.F. Wei, G.W. Wang, K.X. Jiao, and T.J. Yang, Interfaces between coke, slag, and metal in the tuyere level of a blast furnace, Metall. Mater. Trans. B, 46(2015), No. 3, p. 1104.

Relative Articles

Cited By

Proportional views

数据统计

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

数据统计

分享

计量

Dripping and evolution behavior of primary slag bearing TiO₂ through the coke packed bed in a blast-furnace hearth

中文摘要

Dripping and evolution behavior of primary slag bearing TiO₂ through the coke packed bed in a blast-furnace hearth

Abstract

References

数据统计

Catalog