Cite this article as: |
Jin-fang Ma, Guang-wei Wang, Jian-liang Zhang, Xin-yu Li, Zheng-jian Liu, Ke-xin Jiao, and Jian Guo, Reduction behavior and kinetics of vanadium-titanium sinters under high potential oxygen enriched pulverized coal injection, Int. J. Miner. Metall. Mater., 24(2017), No. 5, pp. 493-503. https://doi.org/10.1007/s12613-017-1430-5 |
Guang-wei Wang E-mail: wgw676@163.com
[1] |
X.P. Hu and M.Y. Liu, Application research on a high grade brazilian concentrates in sintering process, Res. Iron Steel, 38(2010), No. 2, p. 17.
|
[2] |
L.J. Yan, S.L. Wu, Y. You, Y.D. Pei, and L.H. Zhang, Assimilation of iron ores and ore matching method based on complementary assimilation, J. Univ. Sci. Technol. Beijing, 32(2010), No. 3, p. 298.
|
[3] |
J.G. Hu and Z.M. Gao, Characteristics of Marra Mamba iron ore fines and the application technology in sintering process, Res. Iron Steel, 36(2008), No. 5, p. 25.
|
[4] |
H.G. Li, G. An, Z.X. Zhao, and S.H. Ou, Experimental research on sintering performances of imported powder iron ores with high and medium ignition loss, Met. Mine,(2006), No. 8, p. 41.
|
[5] |
C.S. Deng, The reduction behavior and iron slag formation characteristics of vanadium-titanium sinter in blast furnace by dissecting 0.8 m3 blast furnace, Sichuan Metall.,(1985), No. 2, p. 4.
|
[6] |
S.S. Liu, Y.F. Guo, G.Z. Qiu, T. Jiang, and F. Chen, Solid-state reduction kinetics and mechanism of pre-oxidized vanadium-titanium magnetite concentrate, Trans. Nonferrous Met. Soc. China, 24(2014), No. 10, p 3372.
|
[7] |
Y.Q. Bai, S.S. Cheng, H.B. Zhao, and S.F. Huo, Study of V-Ti sinter reduction degradation by mineralogical analysis, Sintering Pelletizing, 36(2011), No. 2, p. 1.
|
[8] |
Q. Lu, F.M. Li, W.S. Wang, and B.S. Hu, Influence of w (MgO) on sinter strength and sintering process of vanadium-titanium magnetite, Res. Iron Steel, 35(2007), No. 1, p. 5.
|
[9] |
M. Zhou, S.T. Yang, T. Jiang, and X.X. Xue, Influence of MgO in form of magnesite on properties and mineralogy of high chromium, vanadium, titanium magnetite sinters, Ironmaking Steelmaking, 42(2015), No. 3, p. 217.
|
[10] |
Z.G. Liu, M.S. Chu, H.T. Wang, W. Zhao, and X.X. Xue, Effect of MgO content in sinter on the softening-melting behavior of mixed burden made from chromium-bearing vanadium-titanium magnetite, Int. J. Miner. Metall. Mater., 23(2016), No. 1, p. 25.
|
[11] |
G.Q. Yang, J.L. Zhang, J.G. Shao, Y.C. Wen, J.T. Rao, and W.G. Fu, Influence of vanadium titano-magnetite concentrate proportion on metallurgical properties of V-Ti bearing sinter, Sintering Pelletizing, 37(2012), No. 2, p. 6.
|
[12] |
Y.P. Sun, P.J. Liu, J.L. Lü, and J. Wang, Practice of blast furnace protection with titanium-containing sinter, Iron Steel Vanadium Titanium, 34(2013), No. 5, p. 48.
|
[13] |
J.J. Zhu and W.Z. Wang, Effects of PCI with oxygen enriched blast on the temperature field of the middle and upper zone in BF, Iron Making, 13(1994), No. 4, p. 19.
|
[14] |
A. Babich, S. Yaroshevskii, A. Formoso, A. Isidro, S. Ferreira, A. Cores, and L. Garcia, Increase of pulverized coal use efficiency in blast furnace, ISIJ Int., 36(1996), No. 10, p. 1250.
|
[15] |
H. Ghanbari, F. Pettersson, and H. Saxén, Sustainable development of primary steelmaking under novel blast furnace operation and injection of different reducing agents, Chem. Eng. Sci., 129(2015), p. 208.
|
[16] |
Y.S. Shen, B.Y. Guo, A.B. Yu, and P. Zulli, Model study of the effects of coal properties and blast conditions on pulverized coal combustion, ISIJ Int., 49(2009), No. 6, p. 819.
|
[17] |
C.J. Yan, X.L. Cheng, J.J. Gao, and Y.S. Zhou, Effect of high oxygen enrichment PCI on BF blast ironmaking, Iron Steel, 48(2013), No. 6, p. 25.
|
[18] |
Z.Q. Hao, X.C. Li, and Q. Wang, Effect of metallization degree of burden on ironmaking operation of BF with oxygen enriched blast and coal injection, J. Iron Steel Res., 12(2000), Suppl.1, p. 81.
|
[19] |
G.W. Wang, J.L. Zhang, J.G. Shao, H.B. Zuo, and J.Q. Qiu, Model for economic evaluation of iron production with oxygen-enriched and pulverized coal injection, Iron Steel, 48(2013), No. 11, p. 21.
|
[20] |
J.X. Li, P. Wang, and L.Y. Zhou, Technique of oxygen blast furnace with high injection of PC and hydrogenous fuel, J. Iron Steel Res., 21(2009), No. 6, p. 13.
|
[21] |
J. Szekely and J.W. Evans, A structural model for gas-solid reactions with a moving boundary, Chem. Eng. Sci., 25(1970), No. 6, p. 1091.
|
[22] |
J. Ochoa, M.C. Cassanello, P.R. Bonelli, and A.L. Cukierman, CO2 gasification of Argentinean coal chars:a kinetic characterization, Fuel Process. Technol., 74(2001), No. 3, p. 161.
|
[23] |
S. Kasaoka, Y. Sakata, and C. Tong, Kinetic evaluation of the reactivity of various coal chars for gasification with carbon dioxide in comparison with stream, Int. Chem. Eng., 25(1985), No. 1, p. 160.
|
[24] |
J.Y. Shang and E.E. Wolf, Kinetic and FTIR studies of the sodium-catalyzed steam gasification of coal char, Fuel, 63(1984), No. 11, p. 1604.
|
[25] |
C. Shuai, Y.Y. Bin, S. Hu, J. Xiang, L.S. Sun, S. Su, K. Xu, and C.F. Xu, Kinetic models of coal char steam gasification and sensitivity analysis of the parameters, J. Fuel Chem. Technol., 41(2013), No. 5, p. 558.
|
[26] |
J.L. Zhang, G.W. Wang, J.G. Shao, and H.B. Zuo, A modified random pore model for the kinetics of char gasification, BioResources, 9(2014), No. 2, p. 3497.
|