Cite this article as: |
Cheng-zhuang Lu, Jing-yuan Li, and Zhi Fang, Effects of asymmetric rolling process on ridging resistance of ultra-purified 17%Cr ferritic stainless steel, Int. J. Miner. Metall. Mater., 25(2018), No. 2, pp. 216-225. https://doi.org/10.1007/s12613-018-1564-0 |
Jing-yuan Li E-mail: lijy@ustb.edu.cn
[1] |
I. Jung, J. Mola, D. Chae, and B.C. De Cooman, Influence of the cold rolling and annealing sequence on the ridging behavior of Ti-stabilized 18% Cr ferritic stainless steel, Steel Res. Int., 81(2010), No. 12, p. 1089.
|
[2] |
Y. Li, J.P. Han, Z.H. Jiang, and P. He, Effect of tin addition on the microstructure and properties of ferritic stainless steel, Int. J. Miner. Metall. Mater., 22(2015), No. 1, p. 37.
|
[3] |
Q. Xiong, Y.L. Chen, and J.Y. Li, Effect of transverse pre-stretching before deep drawing on the surface ridging resistance of 17%Cr ultra-purified ferritic stainless steel, Chin. J. Eng., 37(2015), No. 9, p. 1149.
|
[4] |
S. Vafaeian, A. Fattah-alhosseini, M.K. Keshavarz, and Y. Mazaheri, The influence of cyclic voltammetry passivation on the electrochemical behavior of fine and coarse-grained AISI 430 ferritic stainless steel in an alkaline solution, J. Alloys Compd., 677(2016), p. 42.
|
[5] |
J. Han, H.J. Li, and H.G. Xu, Microalloying effects on microstructure and mechanical properties of 18Cr-2Mo ferritic stainless steel heavy plates, Mater. Des., 58(2014), p. 518.
|
[6] |
K.M. Lee, J. Park, S. Kim, S. Park, and M.Y. Huh, Quantification of ridging in ferritic stainless steel sheets by electron backscattered diffraction R-value maps, Microsc. Microanal., 19(2013), No. 5, p. 17.
|
[7] |
P.D. Wu, H. Jin, Y. Shi, and D.J. Lloyd, Analysis of ridging in ferritic stainless steel sheet, Mater. Sci. Eng. A, 423(2006), No. 1-2, p. 300.
|
[8] |
J. Mola, I. Jung, J. Park, D. Chae, and B.C. De Cooman, Ridging control in transformable ferritic stainless steels, Metall. Mater. Trans. A, 43(2012), No. 1, p. 228.
|
[9] |
S.H. Park, K.Y. Kim, Y.D. Lee, and C.G. Park, Evolution of microstructure and texture associated with ridging in ferritic stainless steels, ISIJ Int., 42(2002), No. 1, p. 100.
|
[10] |
S. Patra, A. Ghosh, J. Sood, L.K. Singhal, A.S. Podder, and D. Chakrabarti, Effect of coarse grain band on the ridging severity of 409 L ferritic stainless steel, Mater. Des., 106(2016), p. 336.
|
[11] |
T. Tsuchiyama, R. Hirota, K. Fukunaga, and S. Takaki, Ridging-free ferritic stainless steel produced through recrystallization of lath martensite, ISIJ Int., 45(2005), No. 6, p. 923.
|
[12] |
O. Engler, M.Y. Huh, and C.N. Tomé, Crystal-plasticity analysis of ridging in ferritic stainless steel sheets, Metall. Mater. Trans. A, 36(2005), No. 11, p. 3127.
|
[13] |
J.T. Shi, L.G. Hou, J.R. Zuo, L.Z. Zhuang, and J.S. Zhang, Effect of cryogenic rolling and annealing on the microstructure evolution and mechanical properties of 304 stainless steel, Int. J. Miner. Metall. Mater., 24(2017), No. 6, p. 638.
|
[14] |
J. Mola, D. Chae, and B.C. De Cooman, Influence of texture on ridging and formability of 16%Cr ferritic stainless steel, Solid State Phenom., 160(2010), p. 153.
|
[15] |
H. Miyamoto, T. Xiao, T. Uenoya, and M. Hatano, Effect of simple shear deformation prior to cold rolling on texture and ridging of 16% Cr ferritic stainless steel sheets, ISIJ Int., 50(2010), No. 11, p. 1653.
|
[16] |
S. Patra and L.K. Singhal, Influence of hot band annealing and cold rolling on texture and ridging of 430 stainless steel containing aluminium, Mater. Sci. Appl., 4(2013), p. 70.
|
[17] |
W.J. Kim, J.B. Lee, W.Y. Kim, H.T. Jeong, and H.G. Jeong, Microstructure and mechanical properties of Mg-Al-Zn alloy sheets severely deformed by asymmetrical rolling, Scripta Mater., 56(2007), No. 4, p. 309.
|
[18] |
A. Bintu, G. Vincze, R.C. Picu, and A.B. Lopes, Effect of symmetric and asymmetric rolling on the mechanical properties of AA5182, Mater. Des., 100(2016), p. 151.
|
[19] |
J. Liu and R. Kawalla, Influence of asymmetric hot rolling on microstructure and rolling force with austenitic steel, Trans. Nonferrous Met. Soc. China, 22(2012), p. 504.
|
[20] |
Y. Ding, J.H. Jiang, and A.D. Shan, Microstructures and mechanical properties of commercial purity iron processed by asymmetric rolling, Mater. Sci. Eng. A, 509(2009), No. 1-2, p. 76.
|
[21] |
M.Z. Quadir and B.J. Duggan, Shear band thickening during rolling of interstitial free steel, ISIJ Int., 46(2006), No. 10, p. 1495.
|
[22] |
X. Huang, K. Suzuki, A. Watazu, I. Shigematsu, and N. Saito, Improvement of formability of Mg-Al-Zn alloy sheet at low temperatures using differential speed rolling, J. Alloys Compd., 470(2009), No. 1-2, p. 263.
|
[23] |
S.B. Kang, B.K. Min, H.W. Kim, D.S. Wilkinson, and J.D. Kang, Effect of asymmetric rolling on the texture and mechanical properties of AA6111-aluminum sheet, Metall. Mater. Trans. A, 36(2005), No. 11, p. 3141.
|
[24] |
C. Zhang, Z.Y. Liu, and G.D. Wang, Effects of hot rolled shear bands on formability and surface ridging of an ultra purified 21%Cr ferritic stainless steel, J. Mater. Process. Technol., 211(2011), No. 6, p. 1051.
|
[25] |
F. Gao, Z.Y. Liu, H.T. Liu, and G.D. Wang, Texture evolution and formability under different hot rolling conditions in ultra purified 17% Cr ferritic stainless steels, Mater. Charact., 75(2013), p. 93.
|
[26] |
D.N. Lee, Asymmetric rolling as means of texture and ridging control and grain refinement of aluminum alloy and steel sheets, Mater. Sci. Forum, 449(2004), No. 7, p. 1.
|
[27] |
X. Huang, K. Suzuki, A. Watazu, I. Shigematsu, and N. Saito, Microstructural and textural evolution of AZ31 magnesium alloy during differential speed rolling, J. Alloys Compd., 479(2009), No. 1-2, p. 726.
|
[28] |
S.H. Lee and D.N. Lee, Analysis of deformation textures of asymmetrically rolled steel sheets, Int. J. Mech. Sci., 43(2001), No. 9, p. 1997.
|
[29] |
A. Wauthier, H. Regle, J. Formigoni, and G. Herman, The effects of asymmetrical cold rolling on kinetics, grain size and texture in IF steels, Mater. Charact., 60(2009), No. 2, p. 90.
|
[30] |
X. Yang, L. Sun, J. Xiong, P. Zhou, H.Y. Fan, and J.Y. Liu, Effect of aging temperature on the microstructures and mechanical properties of ZG12Cr9Mo1Co1NiVNbNB ferritic heat-resistant steel. Int. J. Miner. Metall. Mater., 23(2016), No. 2, p. 168.
|
[31] |
M.Y. Huh, J.H. Lee, S.H. Park, O. Engler, and D. Raabe, Effect of through-thickness macro and micro-texture gradients on ridging of 17% Cr ferritic stainless steel sheet, Steel Res. Int., 76(2005), No. 11, p. 797.
|