留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 25 Issue 5
May  2018
Turn off MathJax
目录
数据统计

分享

计量
  • 文章访问数:  512
  • HTML全文浏览量:  82
  • PDF下载量:  19
  • 被引次数: 0
文章导航 >  矿物冶金与材料学报（英文）  > 2018  >  25(5): 554-563
Xiao-hui Ao, Shu-ming Xing, Bai-shui Yu,  and Qing-you Han, Effect of Ce addition on microstructures and mechanical properties of A380 aluminum alloy prepared by squeeze-casting, Int. J. Miner. Metall. Mater., 25(2018), No. 5, pp. 554-563. https://doi.org/10.1007/s12613-018-1602-y
Cite this article as:
Xiao-hui Ao, Shu-ming Xing, Bai-shui Yu,  and Qing-you Han, Effect of Ce addition on microstructures and mechanical properties of A380 aluminum alloy prepared by squeeze-casting, Int. J. Miner. Metall. Mater., 25(2018), No. 5, pp. 554-563. https://doi.org/10.1007/s12613-018-1602-y
shu
引用本文 PDF XML SpringerLink
研究论文

Effect of Ce addition on microstructures and mechanical properties of A380 aluminum alloy prepared by squeeze-casting

  • School of Mechanical Electronic and Control Engineering, Beijing Jiaotong University, Beijing 100044, China

  • Department of Mechanical Engineering Technology, Purdue University, Indiana-IN 47907, America

  • 通讯作者:

    Shu-ming Xing    E-mail: smxing@bjtu.edu.cn

  • The effect of cerium (Ce) addition on the eutectic Si, β-Al5FeSi phase, and the tensile properties of A380 alloy specimens prepared by squeeze-casting were studied by optical microscopy (OM), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The experimental results showed that Ce more effectively modified the eutectic Si and refined the β-Al5FeSi. The refinement effect significantly increased under a specific pressure of 100 MPa with the addition of Ce from 0.1wt% to 0.9wt%. In contrast, the average length and the aspect ratio of the eutectic Si and β-Al5FeSi exhibited their optimal values when the content of the added Ce was greater than 0.5wt%. Needle-like Al8Cu4Ce was precipitated with the addition of excessive Ce; hence, the mechanical properties of A380 gradually decreased with increasing Ce content in the range from 0.3wt% to 0.9wt%.
    • Research Article

    Effect of Ce addition on microstructures and mechanical properties of A380 aluminum alloy prepared by squeeze-casting

    + Author Affiliations
      Abstract
    • The effect of cerium (Ce) addition on the eutectic Si, β-Al5FeSi phase, and the tensile properties of A380 alloy specimens prepared by squeeze-casting were studied by optical microscopy (OM), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The experimental results showed that Ce more effectively modified the eutectic Si and refined the β-Al5FeSi. The refinement effect significantly increased under a specific pressure of 100 MPa with the addition of Ce from 0.1wt% to 0.9wt%. In contrast, the average length and the aspect ratio of the eutectic Si and β-Al5FeSi exhibited their optimal values when the content of the added Ce was greater than 0.5wt%. Needle-like Al8Cu4Ce was precipitated with the addition of excessive Ce; hence, the mechanical properties of A380 gradually decreased with increasing Ce content in the range from 0.3wt% to 0.9wt%.
      • FullText(HTML)
    • loading
      • Supplements(0)
      • References(30)
    • [1]
      C.M. Dinnis, J.A. Taylor, and A.K. Dahle, As-cast morphology of iron-intermetallics in Al-Si foundry alloys, Scripta Mater., 53(2005), No. 8, p. 955.
      [2]
      Y.S. Rao, H. Yan, and Z. Hu, Modification of eutectic silicon and β-Al5FeSi phases in as-cast ADC12 alloys by using samarium addition, J. Rare Earths, 31(2013), No. 9, p. 916.
      [3]
      Q.L. Li, T.D. Xia, Y.F. Lan, W.J. Zhao, L. Fan, and P.F. Li, Effect of rare earth cerium addition on the microstructure and tensile properties of hypereutectic Al-20%Si alloy, J. Alloys Compd., 562(2013), p. 25.
      [4]
      H. Mehdi and D.V. Malakhov, Effect of Ce and La on microstructure and properties of a 6xxx series type aluminum alloy, J. Mater. Sci., 43(2008), p. 7157.
      [5]
      Y. Tsaia, S. Leeab, and C. Lin, Effect of trace Ce addition on the microstructures and mechanical properties of A356(Al-7Si-0.35Mg) aluminum alloys, J. Chin. Inst. Eng., 34(2011), No. 5, p. 609.
      [6]
      V. Vijeesh and K.N. Prabhu, Computer aided cooling curve analysis and microstructure of cerium added hypereutectic Al-Si (LM29) alloy, Trans. Indian Inst. Met., 67(2014), No. 4, p. 541.
      [7]
      E.M. Elgallad, H.W. Doty, S.A. Alkahtani, and F.H. Samuel, Effects of La and Ce addition on the modification of Al-Si based alloys, Adv. Mater. Sci. Eng., 2016(2016), p. 1.
      [8]
      P. Ashtari, H. Tezuka, and T. Sato, Modification of Fe-containing intermetallic compounds by K addition to Fe-rich AA319 aluminum alloys, Scripta Mater., 53(2005), No. 8, p. 937.
      [9]
      L. Lu and A.K. Dahle, Iron-rich intermetallic phases and their role in casting defect formation in hypoeutectic Al-Si alloys, Metall. Mater. Trans. A, 36(2005), No. 13, p. 819.
      [10]
      S. Kores, M. Vončina, B. Kosec, and J. Medved, Formation of AlFeSi phase in AlSi12 alloy with Ce addition, Metalurgija, 51(2012), No. 2, p. 216.
      [11]
      M. Vončina, S. Kores, P. Mrvar, and J. Medved, Solidification and precipitation behaviour in the AlSi9Cu3 alloy with various Ce additions, Mater. Tehnol., 45(2011), No. 6, p. 549.
      [12]
      E. Witthaya, Modification of β-Al5FeSi compound in recycled Al-Si-Fe cast alloy by using Sr, Mg and Cr additions, J. Mater. Sci. Technol., 24(2008), No. 1, p. 45.
      [13]
      P. Ashtari, H. Tezuka, and T. Sato, Influence of Li addition on intermetallic compound morphologies in Al-Si-Cu-Fe cast alloys, Scripta Mater., 51(2004), No. 1, p. 43.
      [14]
      P. Hu, Y. Su, W.P. Chen, and Y. Jiang, Effects of Ce, Mn, Cr on the microstructure and properties of high-Iron eutectic Al-Si piston alloy, Adv. Mater. Res., 652-654(2013), p. 1023.
      [15]
      L.A. Narayanan, F.H. Samuel, and J.E. Gruzleski, Crystallization behavior of iron-containing intermetallic compounds in 319 aluminium alloy, Metall. Mater. Trans. A, 25(1994), No. 8, p. 1761.
      [16]
      X. Cao and J. Campbell, The nucleation of Fe-rich phases on oxide films in Al-11.5Si-0.4Mg cast alloys. Metall. Mater. Trans. A, 34(2003), No. 7, p. 1409.
      [17]
      J. Campbell, Discussion of “Effect of strontium and phosphorus on eutectic Al–Si nucleation and formation of β-Al5FeSi in hypoeutectic Al–Si foundry alloys”, Metall. Mater. Trans. A, 40(2009), No. 5, p. 1009.
      [18]
      S.G. Irizalp and N. Saklakoglu, Effect of Fe-rich intermetallics on the microstructure and mechanical properties of thixoformed A380 aluminum alloy, Eng. Sci. Technol. Int. J., 17(2014), No. 2, p. 58.
      [19]
      A.Q. Wang, L.J. Zhang, and J.P. Xie, Effects of cerium and phosphorus on microstructures and properties of hypereutectic Al–21%Si alloy, J. Rare Earths, 31(2013), No. 5, p. 522.
      [20]
      M.R. Ghomashchi and A. Vikhrov, Squeeze casting: An overview, J. Mater. Process. Technol., 101(2000), No. 1-3, p. 1.
      [21]
      Y.L. Zhao, F.S. Meng, Y. Zhang, D.T. Zhang, C. Yang, and W.W. Zhang, Effect of Si content on microstructures and mechanical properties of Al-5.0Cu-0.6Mn-0.7Fe alloy prepared by squeeze casting, Chin. J. Nonferrous Met., 25(2015), No. 11, p. 3040.
      [22]
      H. Zahedi, M. Emamy, A. Razaghian, M. Mahta, J. Campbell, and M. Tiryakioğlu, The effect of Fe-rich intermetallics on the weibull distribution of tensile properties in a cast Al-5 Pct Si-3 Pct Cu-1 Pct Fe-0.3 Pct Mg alloy, Metall. Mater. Trans. A, 38(2007), No. 3, p. 659.
      [23]
      R.Z. Tian, Cast Aluminum Alloy, Central South University Press, Changsha, 2006, p. 97.
      [24]
      S.M. Xing and P.W. Bao, Melted Metal Die Forging, National Defense Industry Press, 2011, p. 26.
      [25]
      S. Seifeddine, S. Johansson, and I.L. Svensson, The influence of cooling rate and manganese content on the β-Al5FeSi phase formation and mechanical properties of Al-Si based alloys, Mater. Sci. Eng. A, 490(2008), No. 1-2, p. 385.
      [26]
      S.X. Ji, W.C. Yang, F. Gao, D. Watson, and Z.Y. Fan, Effect of iron on the microstructure and mechanical property of Al-Mg-Si-Mn and Al-Mg-Si diecast alloys, Mater. Sci. Eng. A, 564(2013), p. 130.
      [27]
      B.S. Yu, S.M. Xing, X.H. Ao, and C. Sun, Effect of pressures on macro-/microstructures and mechanical properties of A380 aluminum alloy, Chin. J. Eng., 39(2017), No. 7, p. 1020.
      [28]
      W.T. Wang, X.M. Zhang, Z.G. Gao, Y.Z. Jia, L.Y. Ye, D.W. Zheng, and L. Liu, Influences of Ce addition on the microstructures and mechanical properties of 2519A aluminum alloy plate, J. Alloys Compd., 491(2010), No. 1-2, p. 366.
      [29]
      L.Y. Ye, G. Gu, J. Liu, H.C. Jiang, and X.M. Zhang, Influence of Ce addition on impact properties and microstructures of 2519A aluminum alloy, Mater. Sci. Eng. A, 582(2013), p. 84.
      [30]
      J.C. Zhang, D.Y. Ding, X.L. Xu, Y.J. Gao, G.Z. Chen, W.G Chen, X.H. You, Y.W. Huang, and J.S. Tang, Effect of Ce addition on the mechanical and electrochemical properties of a lithium battery shell alloy, J. Alloys Compd., 617(2014), p. 665.
      • Relative Articles
      Cited By

    Catalog


    • /

      返回文章
      返回

      版权所有 ©《矿物冶金与材料学报（英文）》编辑部

      地址：北京市海淀区学院路30号邮政编码：100083

      电子邮箱：journal@ustb.edu.cn电话：+86-10-62332875

      本系统由 北京仁和汇智信息技术有限公司 开发    百度统计