留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 25 Issue 6
Jun.  2018
数据统计

分享

计量
  • 文章访问数:  510
  • HTML全文浏览量:  91
  • PDF下载量:  12
  • 被引次数: 0
Xiao-guang Liu, Yan Li, Wen-dong Xue, Jia-lin Sun,  and Qian Tang, Shear-thickening behavior of Fe-ZSM5 zeolite slurry and its removal with alumina/boehmites, Int. J. Miner. Metall. Mater., 25(2018), No. 6, pp. 682-688. https://doi.org/10.1007/s12613-018-1615-6
Cite this article as:
Xiao-guang Liu, Yan Li, Wen-dong Xue, Jia-lin Sun,  and Qian Tang, Shear-thickening behavior of Fe-ZSM5 zeolite slurry and its removal with alumina/boehmites, Int. J. Miner. Metall. Mater., 25(2018), No. 6, pp. 682-688. https://doi.org/10.1007/s12613-018-1615-6
引用本文 PDF XML SpringerLink
研究论文

Shear-thickening behavior of Fe-ZSM5 zeolite slurry and its removal with alumina/boehmites

  • 通讯作者:

    Xiao-guang Liu    E-mail: liuxg@ustb.edu.cn

  • A cryogenic scanning electron microscopy (cryo-SEM) technique was used to explore the shear-thickening behavior of Fe-ZSM5 zeolite pastes and to discover its underlying mechanism. Bare Fe-ZSM5 zeolite samples were found to contain agglomerations, which may break the flow of the pastes and cause shear-thickening behaviors. However, the shear-thickening behaviors can be eliminated by the addition of halloysite and various boehmites because of improved particle packing. Furthermore, compared with pure Fe-ZSM5 zeolite samples and its composite samples with halloysite, the samples with boehmite (Pural SB or Disperal) additions exhibited network structures in their cryo-SEM images; these structures could facilitate the storage and release of flow water, smooth paste flow, and avoid shear-thickening. By contrast, another boehmite (Versal 250) formed agglomerations rather than network structures after being added to the Fe-ZSM5 zeolite paste and resulted in shear-thickening behavior. Consequently, the results suggest that these network structures play key roles in eliminating the shear-thickening behavior.
  • Research Article

    Shear-thickening behavior of Fe-ZSM5 zeolite slurry and its removal with alumina/boehmites

    + Author Affiliations
    • A cryogenic scanning electron microscopy (cryo-SEM) technique was used to explore the shear-thickening behavior of Fe-ZSM5 zeolite pastes and to discover its underlying mechanism. Bare Fe-ZSM5 zeolite samples were found to contain agglomerations, which may break the flow of the pastes and cause shear-thickening behaviors. However, the shear-thickening behaviors can be eliminated by the addition of halloysite and various boehmites because of improved particle packing. Furthermore, compared with pure Fe-ZSM5 zeolite samples and its composite samples with halloysite, the samples with boehmite (Pural SB or Disperal) additions exhibited network structures in their cryo-SEM images; these structures could facilitate the storage and release of flow water, smooth paste flow, and avoid shear-thickening. By contrast, another boehmite (Versal 250) formed agglomerations rather than network structures after being added to the Fe-ZSM5 zeolite paste and resulted in shear-thickening behavior. Consequently, the results suggest that these network structures play key roles in eliminating the shear-thickening behavior.
    • loading
    • [1]
      J. Zhu and H. Yan, Microstructure and properties of mullite-based porous ceramics produced from coal fly ash with added Al2O3, Int. J. Miner. Metall. Mater., 24(2017), No. 3, p. 309.
      [2]
      J.H. Li, H.Z. Chang, L. Ma, J.M. Hao, and R.T. Yang, Low-temperature selective catalytic reduction of NOx with NH3 over metal oxide and zeolite catalysts—A review, Catal. Today, 175(2011), No. 1, p. 147.
      [3]
      S. Brandenberger, O. Kröcher, A. Tissler, and R. Althoff, The state of the art in selective catalytic reduction of NOx by ammonia using metal-exchanged zeolite catalysts, Catal. Rev. Sci. Eng., 50(2008), No. 4, p. 492.
      [4]
      Y. Traa, B. Burger, and J. Weitkamp, Zeolite-based materials for the selective catalytic reduction of NOx with hydrocarbons, Microporous Mesoporous Mater., 30(1999), No. 1, p. 3.
      [5]
      P.S. Metkar, V. Balakotaiah, and M.P. Harold, Experimental and kinetic modeling study of NO oxidation: Comparison of Fe and Cu-zeolite catalysts, Catal. Today, 184(2012), No. 1, p. 115.
      [6]
      J.M. Zamaro, M.A. Ulla, and E.E. Miró, Zeolite washcoating onto cordierite honeycomb reactors for environmental applications, Chem. Eng. J., 106(2005), No. 1, p. 25.
      [7]
      F. Akhtar, L. Andersson, S. Ogunwumi, N. Hedin, and L. Bergström, Structuring adsorbents and catalysts by processing of porous powders, J. Eur. Ceram. Soc., 34(2014), No. 7, p. 1643.
      [8]
      B. Mitra and D. Kunzru, Washcoating of different zeolites on cordierite monoliths, J. Am. Ceram. Soc., 91(2008), No. 1, p. 64.
      [9]
      P.S. Metkar, N. Salazar, R. Muncrief, V. Balakotaiah, and M.P. Harold, Selective catalytic reduction of NO with NH3 on iron zeolite monolithic catalysts: Steady-state and transient kinetics, Appl. Catal. B, 104(2011), No. 1-2, p. 110.
      [10]
      P. Avila, M. Montes, and E.E. Miró, Monolithic reactors for environmental applications: A review on preparation technologies, Chem. Eng. J., 109(2005), p. 11.
      [11]
      H. Thakkar, S. Eastman, A. Hajari, A.A. Rownaghi, J.C. Knox, and F. Rezaei, 3D-printed zeolite monoliths for CO2 removal from enclosed environments, ACS Appl. Mater. Interfaces, 8(2016), No. 41, p. 27753.
      [12]
      S. Couck, J. Lefevere, S. Mullens, L. Protasova, V. Meynen, G. Desmet, G.V. Baron, and J.F.M. Denayer, CO2, CH4 and N2 separation with a 3DFD-printed ZSM-5 monolith, Chem. Eng. J., 308(2017), p. 719.
      [13]
      A. Ojuva, M. Järveläinen, M. Bauer, L. Keskinen, M. Valkonen, F. Akhtar, E. Levänen, and L. Bergström, Mechanical performance and CO2 uptake of ion-exchanged zeolite A structured by freeze-casting, J. Eur. Ceram. Soc., 35(2015), No. 9, p. 2607.
      [14]
      J. Bender and N.J. Wagner, Reversible shear thickening in monodisperse and bidisperse colloidal dispersions, J. Rheol., 40(1996), No. 5, p. 899.
      [15]
      Z.W. Zhou, P.J. Scales, and D.V. Boger, Chemical and physical control of the rheology of concentrated metal oxide suspensions, Chem. Eng. Sci., 56(2001), No. 9, p. 2901.
      [16]
      M. Unesi, M. Noaparast, S.Z. Shafaei, and E. Jorjani, Modeling the effects of ore properties on water recovery in the thickening process, Int. J. Miner. Metall. Mater., 21(2014), No. 9, p. 851.
      [17]
      Y.S. Zheng, J.Q. Song, X.Y. Xu, M.Y. He, Q. Wang, and L.J. Yan, Peptization mechanism of boehmite and its effect on the preparation of a fluid catalytic cracking catalyst, Ind. Eng. Chem. Res. 53(2014), No. 24, p. 10029.
      [18]
      H. Mills and S. Blackburn, Rheological behavior of γ-alumina/boehmite pastes, Chem. Eng. Res. Des., 80(2002), No. 5, p. 464.

    Catalog


    • /

      返回文章
      返回