Combustion characteristics and kinetic analysis of co-combustion between bag dust and pulverized coal

Tao Xu, Xiao-jun Ning, Guang-wei Wang, Wang Liang, Jian-liang Zhang, Yan-jiang Li, Hai-yang Wang, Chun-he Jiang

分享

计量
  • 文章访问数:  605
  • HTML全文浏览量:  94
  • PDF下载量:  20
  • 被引次数: 19

目录

Cite this article as:

Tao Xu, Xiao-jun Ning, Guang-wei Wang, Wang Liang, Jian-liang Zhang, Yan-jiang Li, Hai-yang Wang, and Chun-he Jiang, Combustion characteristics and kinetic analysis of co-combustion between bag dust and pulverized coal, Int. J. Miner. Metall. Mater., 25(2018), No. 12, pp.1412-1422. https://dx.doi.org/10.1007/s12613-018-1695-3
Tao Xu, Xiao-jun Ning, Guang-wei Wang, Wang Liang, Jian-liang Zhang, Yan-jiang Li, Hai-yang Wang, and Chun-he Jiang, Combustion characteristics and kinetic analysis of co-combustion between bag dust and pulverized coal, Int. J. Miner. Metall. Mater., 25(2018), No. 12, pp.1412-1422. https://dx.doi.org/10.1007/s12613-018-1695-3
引用本文 PDF XML SpringerLink
研究论文

Combustion characteristics and kinetic analysis of co-combustion between bag dust and pulverized coal

基金项目: 

This work was supported by the Natural Science Foundation for Young Scientists of China (No. 51804026), the Young Elite Scientists Sponsorship Program by China Association for Science and Technology (No. 2017QNRC001), and the National Natural Science Foundation of China (No. 51774032).

    通信作者:

    Xiao-jun Ning E-mail: ningxj@ustb.edu.cn

    Guang-wei Wang E-mail: wgw676@163.com

The combustion characteristics of blast furnace bag dust (BD) and three kinds of coal-Shenhua (SH) bituminous coal, Pingluo (PL) anthracite, and Yangquan (YQ) anthracite-were obtained via non-isothermal thermogravimetry. The combustion characteristics with different mixing ratios were also investigated. The physical and chemical properties of the four samples were investigated in depth using particle size analysis, Scanning electron microscopy, X-ray diffraction, X-ray fluorescence analysis, and Raman spectroscopy. The results show that the conversion rate of the three kinds of pulverized coals is far greater than that of the BD. The comprehensive combustion characteristics of the three types of pulverized coals rank in the order SH > PL > YQ. With the addition of BD, the characteristic parameters of the combustion reaction of the blend showed an increasing trend. The Coats-Redfern model used in this study fit well with the experimental results. As the BD addition increased from 5wt% to 10wt%, the activation energy of combustion reactions decreased from 68.50 to 66.74 kJ/mol for SH, 118.34 to 110.75 kJ/mol for PL, and 146.80 to 122.80 kJ/mol for YQ. These results also provide theoretical support for the practical application of blast furnace dust for blast furnace injection.

 

Research Article

Combustion characteristics and kinetic analysis of co-combustion between bag dust and pulverized coal

Author Affilications
  • Funds: 

    This work was supported by the Natural Science Foundation for Young Scientists of China (No. 51804026), the Young Elite Scientists Sponsorship Program by China Association for Science and Technology (No. 2017QNRC001), and the National Natural Science Foundation of China (No. 51774032).

  • Received: 14 May 2018; Revised: 30 June 2018; Accepted: 08 July 2018;
The combustion characteristics of blast furnace bag dust (BD) and three kinds of coal-Shenhua (SH) bituminous coal, Pingluo (PL) anthracite, and Yangquan (YQ) anthracite-were obtained via non-isothermal thermogravimetry. The combustion characteristics with different mixing ratios were also investigated. The physical and chemical properties of the four samples were investigated in depth using particle size analysis, Scanning electron microscopy, X-ray diffraction, X-ray fluorescence analysis, and Raman spectroscopy. The results show that the conversion rate of the three kinds of pulverized coals is far greater than that of the BD. The comprehensive combustion characteristics of the three types of pulverized coals rank in the order SH > PL > YQ. With the addition of BD, the characteristic parameters of the combustion reaction of the blend showed an increasing trend. The Coats-Redfern model used in this study fit well with the experimental results. As the BD addition increased from 5wt% to 10wt%, the activation energy of combustion reactions decreased from 68.50 to 66.74 kJ/mol for SH, 118.34 to 110.75 kJ/mol for PL, and 146.80 to 122.80 kJ/mol for YQ. These results also provide theoretical support for the practical application of blast furnace dust for blast furnace injection.

 

  • Q.Q. Chen, Y. Gu, Z.Y. Tang, W. Wei, and Y.H. Sun, Assessment of low-carbon iron and steel production with CO2 recycling and utilization technologies:A case study in China, Appl. Energy, 220(2018), p. 192.

    G.W. Wang, J.L. Zhang, J.G. Shao, Z.J. Liu, G.H. Zhang, T. Xu, J. Guo, H.Y. Wang, R.S. Xu, and H. Lin, Thermal behavior and kinetic analysis of co-combustion of waste biomass/low rank coal blends, Energy Convers. Manage., 124(2016), p. 414.

    S. Ren, S.L. Li, J. Yang, H.M. Long, J. Yang, M. Kong, and Z.L. Cai, Poisoning effects of KCl and As2O3 on selective catalytic reduction of NO with NH3 over Mn-Ce/AC catalysts at low temperature, Chem. Eng. J., 351(2018), p. 540.

    U. Leimalm, M. Lundgren, L.S. Okvist, and B. Bjorkman, Off-gas dust in an experimental blast furnace part 1:Characterization of flue dust, sludge and shaft fines, ISIJ Int., 50(2010), No. 11, p. 1560.

    C. Lanzerstorfer, B. Bamberger-Strassmayr, and K. Pilz, Recycling of blast furnace dust in the iron ore sintering process:Investigation of coke breeze substitution and the influence on off-gas emissions, ISIJ Int., 55(2015), No. 4, p. 758.

    V. Trinkel, O. Mallow, P. Aschenbrenner, H. Rechberger, and J. Fellner, Characterization of blast furnace sludge with respect to heavy metal distribution, Ind. Eng. Chem. Res., 55(2016), No. 19, p. 5590.

    N.A. El-Hussiny, M.E.H. Shalabi, Effect of recycling blast furnace flue dust as pellets on the sintering performance, Sci. Sintering, 42(2010), No. 3, p. 269.

    P.K. Singh, P.K. Katiyar, A.L. Kumar, B. Chaithnya, and S. Pramanik, Effect of sintering performance of the utilization of blast furnace solid wastes as pellets, Procedia Mater. Sci., 5(2014), p. 2468.

    C. Zou and J.X. Zhao, Investigation of iron-containing powder on coal combustion behavior, J. Energy Inst., 90(2017), No. 5, p. 797.

    Y.W. Zhong, X.L. Qiu, J.T. Gao, and Z.C. Guo, Structural characterization of carbon in blast furnace flue dust and its reactivity in combustion, Energy Fuels, 31(2017), No. 8, p. 8415.

    L.Z. Shen, Y.S. Qiao, Y. Guo, and J.R. Tan, Preparation of nanometer-sized black iron oxide pigment by recycling of blast furnace flue dust, J. Hazard. Mater., 177(2010), No. 1-3, p. 495.

    G.W. Wang, J.L. Zhang, G.H. Zhang, X.J. Ning, X.Y. Li, Z.J. Liu, and J. Guo, Experimental and kinetic studies on co-gasification of petroleum coke and biomass char blends, Energy, 131(2017), p. 27.

    G.W. Wang, J.L. Zhang, J.G. Shao, and S. Ren, Characterisation and model fitting kinetic analysis of coal/biomass co-combustion, Thermochim. Acta, 591(2014), p. 68.

    G. Yakovlev, V. Khozin, I. Polyanskikh, J. Keriene, A. Gordina, and T. Petrova, Utilization of blast furnace flue dust while modifying gypsum binders with carbon nanostructures,[in] The 9th Conference "Environmental Engineering", Vilnius, 2014, art. No. enviro.2014.025.

    R. Robinson, High temperature properties of by-product cold bonded pellets containing blast furnace flue dust, Thermochim. Acta, 432(2005), No. 1, p. 112.

    D. Zhao, J.L. Zhang, G.W. Wang, A.N. Conejo, R.S. Xu, H.Y. Wang, and J.B. Zhong, Structure characteristics and combustibility of carbonaceous materials from blast furnace flue dust, Appl. Therm. Eng., 108(2016), p. 1168.

    A.W. Coats and J. Redfern, Kinetic parameters from thermogravimetric data, Nature, 201(1964), p. 68.

    G.Q. Liu, Q.C. Liu, X.Q. Wang, F. Meng, S. Ren, and Z.P. Ji, Combustion characteristics and kinetics of anthracite blending with pine sawdust, J. Iron Steel Res. Int., 22(2015), No. 9, p. 812.

    X.J. Li, J. Hayashi, and C.Z. Li, FT-Raman spectroscopic study of the evolution of char structure during the pyrolysis of a Victorian brown coal, Fuel, 85(2006), No. 12-13, p. 1700.

    T.S. Farrow, C.G. Sun, and C.E, Snape. Impact of biomass char on coal char burn-out under air and oxy-fuel conditions, Fuel, 114(2013), p. 128.

    X.G. Li, B.G. Ma, L. Xu, Z.W. Hu, and X.G. Wang, Thermogravimetric analysis of the co-combustion of the blends with high ash coal and waste tyres, Thermochim. Acta, 441(2006), No. 1, p. 79.

    B.G. Ma, X.G. Li, L. Xu, K. Wang, and X.G. Wang, Investigation on catalyzed combustion of high ash coal by thermogravimetric analysis, Thermochim. Acta, 445(2006), No. 1, p. 19.

    Z.T. Yao, X.S. Ji, P.K. Sarker, J.H. Tang, L.Q. Ge, M.S. Xia, and Y.Q. Xi, A comprehensive review on the applications of coal fly ash, Earth Sci. Rev., 141(2015), p. 105.

Relative Articles

王杰, 王炜, 陈绪亨, 鲍俊芳, 郝秋月, 郑恒, 徐润生. 铁矿石对铁焦气化的促进作用:结构演化、影响机理及动力学分析 [J]. 矿物冶金与材料学报(英文版). DOI: 10.1007/s12613-024-2873-0

View details

Int. J. Miner. Metall. Mater., 2019, 26(8): 973-982.

PDF View details

Xiao-jun Ning, Wang Liang, Jian-liang Zhang, Guang-wei Wang, Yan-jiang Li, Chun-he Jiang. Effect of ash on coal structure and combustibility [J]. 矿物冶金与材料学报(英文版). DOI: 10.1007/s12613-019-1812-y

View details

Dong-wen Xiang, Feng-man Shen, Jia-long Yang, Xin Jiang, Hai-yan Zheng, Qiang-jian Gao, Jia-xin Li. Combustion characteristics of unburned pulverized coal and its reaction kinetics with CO2 [J]. 矿物冶金与材料学报(英文版). DOI: 10.1007/s12613-019-1791-z

View details

Sheng-chao Duan, Chuang Li, Han-jie Guo, Jing Guo, Shao-wei Han, Wen-sheng Yang. Investigation of the kinetic mechanism of the demanganization reaction between carbon-saturated liquid iron and CaF2-CaO-SiO2-based slags [J]. 矿物冶金与材料学报(英文版). DOI: 10.1007/s12613-018-1584-9

View details

Cui Wang, Jian-liang Zhang, Guang-wei Wang, Ke-xin Jiao, Zheng-jian Liu, Kuo-chih Chou. Combustion characteristics and kinetics of anthracite with added chlorine [J]. 矿物冶金与材料学报(英文版). DOI: 10.1007/s12613-017-1458-6

View details

Saman Beikzadeh Noei, Saeed Sheibani, Fereshteh Rashchi, Seyed Mohammad Javad Mirazimi. Kinetic modeling of copper bioleaching from low-grade ore from the Shahrbabak Copper Complex [J]. 矿物冶金与材料学报(英文版). DOI: 10.1007/s12613-017-1443-0

View details

Int. J. Miner. Metall. Mater., 2014, 21(1): 12-17.

PDF View details

Qiang-jian Gao, Feng-man Shen, Xin Jiang, Guo Wei, Hai-yan Zheng. Gas-solid reduction kinetic model of MgO-fluxed pellets [J]. 矿物冶金与材料学报(英文版). DOI: 10.1007/s12613-014-0859-z

View details

Cheng-lin Qi, Jian-liang Zhang, Chao Ma, Gen-sheng Feng, Zhong-ping Song. Effects of CeO2 on the XPS valence band spectra of coal under the combustion initialization stage at 400℃ [J]. 矿物冶金与材料学报(英文版). DOI: 10.1007/s12613-013-0732-5

View details

Chunbao Xu, Shengli Wu, Daqiang Cang. Numerical Modeling of NO Formation during Packed-bed Combustion of Coke Granules [J]. 矿物冶金与材料学报(英文版).

View details

Longzhe Jin, Thongan Jiang, Auiying Jin. Characteristics of Water Absorption and the Loss of Dust-Sticking Agent [J]. 矿物冶金与材料学报(英文版).

View details

Citing articles(19)

Xin Li, Guangsheng Wei, Rong Zhu, et al. Coupling kinetics of high-temperature carbothermal reduction of copper slag under carbon dioxide atmosphere. Journal of CO2 Utilization, 2023, 77: 102612. 必应学术
Taoran Yang, Hongwei Guo, Helan Liang, et al. Intelligent Combustion Control of the Hot Blast Stove: A Reinforcement Learning Approach. Processes, 2023, 11(11): 3140. 必应学术
Xiaoxiong Wu, Shijie Wang, Hongming Fang, et al. Study on semi-coke as an alternative fuel for blast furnace injection coal. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2022, 44(2): 5562. 必应学术
More >

/

返回文章
返回