留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 26 Issue 1
Jan.  2019
Turn off MathJax
目录
数据统计

分享

计量
  • 文章访问数:  954
  • HTML全文浏览量:  261
  • PDF下载量:  20
  • 被引次数: 0
文章导航 >  矿物冶金与材料学报（英文）  > 2019  >  26(1): 133-141
Ze-cheng Hou, Lun-qiao Xiong, Yuan-feng Liu, Lin Zhu, and Wen-zhen Li, Preparation of super-aligned carbon nanotube-reinforced nickel-matrix laminar composites with excellent mechanical properties, Int. J. Miner. Metall. Mater., 26(2019), No. 1, pp. 133-141. https://doi.org/10.1007/s12613-019-1717-9
Cite this article as:
Ze-cheng Hou, Lun-qiao Xiong, Yuan-feng Liu, Lin Zhu, and Wen-zhen Li, Preparation of super-aligned carbon nanotube-reinforced nickel-matrix laminar composites with excellent mechanical properties, Int. J. Miner. Metall. Mater., 26(2019), No. 1, pp. 133-141. https://doi.org/10.1007/s12613-019-1717-9
shu
引用本文 PDF XML SpringerLink
研究论文

Preparation of super-aligned carbon nanotube-reinforced nickel-matrix laminar composites with excellent mechanical properties

  • School of Materials Science and Engineering, Tsinghua University, Beijing 100084, China

  • Tsinghua-Foxconn Nanotechnology Research Center, Tsinghua University, Beijing 100084, China

  • 通讯作者:

    Wen-zhen Li    E-mail: zqqlwz@mail.tsinghua.edu.cn

  • A homogeneous and compact super-aligned carbon nanotube (SACNT)-reinforced nickel-matrix composite was successfully prepared by electrodeposition. The mechanical properties of the laminar SACNT/Ni composites were substantially improved compared with those of pure nickel. With increasing content of SACNTs, the tensile strength of the composite increased and the elongation decreased because of the high-strength SACNTs bearing part of an applied load and the fine-grained strengthening mechanism. The nanohardness of the SACNT/Ni composites was improved from 3.92 GPa (pure nickel) to 4.62 GPa (Ni-4vol%SACNTs). The uniform distribution of SACNTs in the composites and strong interfacial bonding between the SACNTs and the nickel matrix resulted in an improvement of the mechanical properties of the SACNT/Ni composites. The introduced SACNTs refined the nickel grains, increased the amount of crystal twins, and changed the preferred orientation of grain growth.
    • Research Article

    Preparation of super-aligned carbon nanotube-reinforced nickel-matrix laminar composites with excellent mechanical properties

    + Author Affiliations
      Abstract
    • A homogeneous and compact super-aligned carbon nanotube (SACNT)-reinforced nickel-matrix composite was successfully prepared by electrodeposition. The mechanical properties of the laminar SACNT/Ni composites were substantially improved compared with those of pure nickel. With increasing content of SACNTs, the tensile strength of the composite increased and the elongation decreased because of the high-strength SACNTs bearing part of an applied load and the fine-grained strengthening mechanism. The nanohardness of the SACNT/Ni composites was improved from 3.92 GPa (pure nickel) to 4.62 GPa (Ni-4vol%SACNTs). The uniform distribution of SACNTs in the composites and strong interfacial bonding between the SACNTs and the nickel matrix resulted in an improvement of the mechanical properties of the SACNT/Ni composites. The introduced SACNTs refined the nickel grains, increased the amount of crystal twins, and changed the preferred orientation of grain growth.
      • FullText(HTML)
    • loading
      • Supplements(0)
      • References(29)
    • [1]
      S.R. Bakshi, D. Lahiri, and A. Agarwal, Carbon nanotube reinforced metal matrix composites-a review, Int. Metall. Rev., 55(2010), No. 1, p. 41.
      [2]
      E. Zapata-Solvas, D. Gómez-García, and A. Domínguez-Rodríguez, Towards physical properties tailoring of carbon nanotubes-reinforced ceramic matrix composites, J. Eur. Ceram. Soc., 32(2012), No. 12, p. 3001.
      [3]
      M. Moniruzzaman and K.I. Winey, Polymer nanocomposites containing carbon nanotubes, Macromolecules, 39(2006), No. 16, p. 5194.
      [4]
      X.Y. Qin, J.S. Lee, J.G. Nam, and B.S. Kim, Synthesis and microstructureal characterization of nanostructured γ-Ni-Fe powder, Nanostruct. Mater., 11(1999), No. 3, p. 383.
      [5]
      C.Y. Chen, J.K. Chang, K.Y. Lin, S.T. Chung, and W.T. Tsai, Enhanced hydrogen storage in MWCNTs decorated by electroless nickel nanoparticles deposited in supercritical CO2 bath, Mater. Sci. Forum, 638-642(2010), p. 1148.
      [6]
      X.H. Chen, D.Y. Li, X.Q. Li, Z.H. Zhang, J.X. Wang, and W.Z. Li, Morphology and wear behavior of Ni-carbon nanotube composite coating, Tribology, 22(2002), No. 1, p. 6.
      [7]
      X.H. Chen, C.S. Chen, H.N. Xiao, F.Q. Cheng, G. Zhang, and G.J. Yi, Corrosion behavior of carbon nanotubes-Ni composite coating, Surf. Coat. Technol., 191(2003), No. 2-3, p. 351.
      [8]
      X.W. Li,Y. Gu, T. Shi, D. Peng, M.K. Tang, Q.X. Zhang, and X.J. Huang, Preparation of the multi-walled carbon nanotubes/nickel composite coating with superior wear and corrosion resistance, J. Mater. Eng. Perform., 24(2015), No. 12, p. 4656.
      [9]
      S.R. Bakshi, V. Singh, S. Seal, and A. Agarwal, Aluminum composite reinforced with multiwalled carbon nanotubes from plasma spraying of spray dried powders, Surf. Coat. Technol., 203(2009), No. 10-11, p. 1544.
      [10]
      Z. Yang, H. Xu, Y.L. Shi, M.K. Li, Y. Huang, and H.L. Li, The fabrication and corrosion behavior of electroless Ni-P-carbon nanotube composite coatings, Mater. Res. Bull., 40(2005), No. 6, p. 1001.
      [11]
      S. Arai, M. Endo, and N. Kaneko, Ni-deposited multi-walled carbon nanotubes by electrodeposition, Carbon, 42(2004), No. 3, p. 641.
      [12]
      L.Q. Xiong, J. Shuai, Z.C. Hou, L. Zhu, and W.Z. Li, Functionalization of super-aligned carbon nanotube film using hydrogen peroxide solution and its application in copper electrodeposition, J. Colloid Interface Sci., 498(2017), p. 405.
      [13]
      L.M. Ang, T.S.A. Hor, G.Q. Xu, C.H. Tung, S.P. Zhao, and J.L.S. Wang, Decoration of activated carbon nanotubes with copper and nickel, Carbon, 38(2000), No. 3, p. 363.
      [14]
      R. Karslioglu and H. Akbulut, Comparison microstructure and sliding wear properties of nickel-cobalt/CNT composite coatings by DC, PC and PRC current electrodeposition, Appl. Surf. Sci., 353(2015), p. 615.
      [15]
      C. Guo, Y. Zuo, X.H. Zhao, J.M. Zhao, and J.P. Xiong, Effects of surfactants on electrodeposition of nickel-carbon nanotubes composite coatings, Surf. Coat. Technol., 202(2008), No. 14, p. 3385.
      [16]
      C. Feng, K. Liu, J.S. Wu, L. Liu, J.S. Cheng, Y.Y. Zhang, Y.H. Sun, Q.Q. Li, S.S. Fan, and K.L. Jiang, Flexible, stretchable, transparent conducting films made from superaligned carbon nanotubes, Adv. Funct. Mater., 20(2010), No. 6, p. 885.
      [17]
      K. Liu, Y.H. Sun, X.Y. Lin, R.F. Zhou, J.P. Wang, S.S. Fan, and K. Jiang, Scratch-resistant, highly conductive, and high-strength carbon nanotube-based composite yarns, ACS Nano, 4(2010), No. 10, p. 5827.
      [18]
      Q.F. Cheng, J.P. Wang, J.J. Wen, C.H. Liu, K.L. Jiang, Q.Q. Li, and S.S. Fan, Carbon nanotube/epoxy composites fabricated by resin transfer molding, Carbon, 48(2010), No. 1, p. 260.
      [19]
      Y. Jin, L. Zhu, W.D. Xue, and W.Z. Li, Fabrication of superaligned carbon nanotubes reinforced copper matrix laminar composite by electrodeposition, Trans. Nonferrous Met. Soc. China, 25(2015), No. 9, p. 2994.
      [20]
      J. Shuai, L.Q. Xiong, L. Zhu, and W.Z. Li, Enhanced strength and excellent transport properties of a super-aligned carbon nanotubes reinforced copper matrix laminar composite, Composites Part A, 88(2016), p. 148.
      [21]
      F. Ebrahimi, G.R. Bourne, M.S. Kelly, and T.E. Matthews, Mechanical properties of nanocrystalline nickel produced by electrodeposition, Nanostruct. Mater., 11(1999), No. 3, p. 343.
      [22]
      H.L. Cox, The elasticity and strength of paper and other fibrous materials, Br. J. Appl. Phys., 3(1952), No. 3, p. 72.
      [23]
      S.I. Cha, K.T. Kim, S.N. Arshad, C.B. Mo, and S.H. Hong, Extraordinary strengthening effect of carbon nanotubes in metal-matrix nanocomposites processed by molecular-level mixing, Adv. Mater., 17(2005), No. 11, p. 1377.
      [24]
      T. Borkar and S. Harimkar, Microstructure and wear behavior of pulse electrodeposited Ni-CNT composite coatings, Surf. Eng., 27(2013), No. 7, p. 524.
      [25]
      E.O. Hall, The deformation and ageing of mild steel:Ⅲ discussion of results, Proc. Phys. Soc. London Sect. B, 64(2002), No. 9, p. 495.
      [26]
      H.J. Ryu, S.I. Cha, and S.H. Hong, Generalized shear-lag model for load transfer in SiC/Al metal-matrix composites, J. Mater. Res., 18(2003), No. 12, p. 2851.
      [27]
      A.A.W. Thompson, Yielding in nickel as a function of grain or cell size, Acta Metall., 23(1975), No. 11, p. 1337.
      [28]
      K. Liu, Y.H. Sun, P. Liu, J.P. Wang, Q.Q. Li, S.S. Fan, and K.L. Jiang, Periodically striped films produced from super-aligned carbon nanotube arrays, Nanotechnology, 20(2009), No. 33, p. 335705.
      [29]
      F. Erler, C. Jakob, H. Romanus, L. Spiess, B. Wielage, T. Lampke, and S. Steinhäuser, Interface behaviour in nickel composite coatings with nano-particles of oxidic ceramic, Electrochim. Acta, 48(2003), No. 20-22, p. 3063.
      • Relative Articles
      Cited By

    Catalog


    • /

      返回文章
      返回

      版权所有 ©《矿物冶金与材料学报（英文）》编辑部

      地址：北京市海淀区学院路30号邮政编码：100083

      电子邮箱：journal@ustb.edu.cn电话：+86-10-62332875

      本系统由 北京仁和汇智信息技术有限公司 开发    百度统计