留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 26 Issue 2
Feb.  2019
Turn off MathJax
目录
数据统计

分享

计量
  • 文章访问数:  727
  • HTML全文浏览量:  179
  • PDF下载量:  28
  • 被引次数: 0
文章导航 >  矿物冶金与材料学报（英文）  > 2019  >  26(2): 178-185
Rui Wang, Yan-ping Bao, Zhi-jie Yan, Da-zhao Li, and Yan Kang, Comparison between the surface defects caused by Al2O3 and TiN inclusions in interstitial-free steel auto sheets, Int. J. Miner. Metall. Mater., 26(2019), No. 2, pp. 178-185. https://doi.org/10.1007/s12613-019-1722-z
Cite this article as:
Rui Wang, Yan-ping Bao, Zhi-jie Yan, Da-zhao Li, and Yan Kang, Comparison between the surface defects caused by Al2O3 and TiN inclusions in interstitial-free steel auto sheets, Int. J. Miner. Metall. Mater., 26(2019), No. 2, pp. 178-185. https://doi.org/10.1007/s12613-019-1722-z
shu
引用本文 PDF XML SpringerLink
研究论文

Comparison between the surface defects caused by Al2O3 and TiN inclusions in interstitial-free steel auto sheets

  • School of Materials Science and Engineering, North University of China, Taiyuan 030051, China

  • State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China

  • 通讯作者:

    Rui Wang    E-mail: wangrui@nuc.edu.cn

  • Al2O3 and TiN inclusions in interstitial-free (IF) steel deteriorate the properties of the steel. To decrease the defects of cold-rolled sheet, it is important to clearly distinguish between the degrees of damage caused by these two inclusions on the surface quality of the steel. In this study, a nanoindenter was used to test the mechanical properties of the inclusions, and the distribution and size of the inclusions were obtained by scanning electron microscopy (SEM). It was found that when only mechanical properties are considered, TiN inclusions are more likely to cause defects than Al2O3 inclusions of the same size during the rolling process. However, Al2O3 inclusions are generally more inclined to cause defects in the rolling process than TiN inclusions because of their distribution characteristic in the thickness direction. The precipitation of Al2O3 and TiN was obtained through thermodynamical calculations. The growth laws of inclusions at different cooling rates were calculated by solidification and segregation models. The results show that the precipitation regularity is closely related to the distribution law of the inclusions in IF slabs along the thickness direction.
    • Research Article

    Comparison between the surface defects caused by Al2O3 and TiN inclusions in interstitial-free steel auto sheets

    + Author Affiliations
      Abstract
    • Al2O3 and TiN inclusions in interstitial-free (IF) steel deteriorate the properties of the steel. To decrease the defects of cold-rolled sheet, it is important to clearly distinguish between the degrees of damage caused by these two inclusions on the surface quality of the steel. In this study, a nanoindenter was used to test the mechanical properties of the inclusions, and the distribution and size of the inclusions were obtained by scanning electron microscopy (SEM). It was found that when only mechanical properties are considered, TiN inclusions are more likely to cause defects than Al2O3 inclusions of the same size during the rolling process. However, Al2O3 inclusions are generally more inclined to cause defects in the rolling process than TiN inclusions because of their distribution characteristic in the thickness direction. The precipitation of Al2O3 and TiN was obtained through thermodynamical calculations. The growth laws of inclusions at different cooling rates were calculated by solidification and segregation models. The results show that the precipitation regularity is closely related to the distribution law of the inclusions in IF slabs along the thickness direction.
      • FullText(HTML)
    • loading
      • Supplements(0)
      • References(17)
    • [1]
      J.L. Guo, Y.P. Bao, and M. Wang, Cleanliness of Ti-bearing Al-killed ultra-low-carbon steel during different heating processes, Int. J. Miner. Metall. Mater., 24(2017), No. 12, p. 1370.
      [2]
      X.X. Deng, L.P. Li, X.H. Wang, J.Q. Ji, C.X. Ji, and G.S. Zhu, Subsurface macro-inclusions and solidified hook character in aluminum-killed deep-drawing steel slabs, Int. J. Miner. Metall. Mater., 21(2014), No. 6, p. 531.
      [3]
      R. Kuziak, H. Hartman, M. Budach, and R. Kawalla, Effect of processing parameters on precipitation reactions occurring in a Ti-bearing IF steel, Mater. Sci. Forum, 500-501(2005), p. 687.
      [4]
      O. León-Garcia, R. Petrov, and L.A.I. Kestens, Void initiation at TiN precipitates in IF steels during tensile deformation, Mater. Sci. Eng. A, 527(2010), No. 16-17, p. 4202.
      [5]
      Y. Hu, W.Q. Chen, C.J. Wan, F.J. Wang, and H.B. Han, Effect of deoxidation process on inclusion and fatigue performance of spring steel for automobile suspension, Metall. Mater. Trans. B, 49(2018), No. 2, p. 569.
      [6]
      L.F. Zhang, C.B. Guo, W. Yang, Y. Ren, and H.T. Li, Deformability of oxide inclusions in tire cord steels, Metall. Mater. Trans. B, 49(2018), No. 2, p. 803.
      [7]
      L. Yang, G.G. Cheng, S.J. Li, M. Zhao, G.P. Feng, and T. Li, A coupled model of TiN inclusion growth in GCr15SiMn during solidification in the electroslag remelting process, Int. J. Miner. Metall. Mater., 22(2015), No. 12, p. 1266.
      [8]
      W.J. Ma, Y.P. Bao, L.H. Zhao, and M. Wang, Control of the precipitation of TiN inclusions in gear steels, Int. J. Miner. Metall. Mater., 21(2014), No. 3, p. 234.
      [9]
      T. Miyake, M. Morishita, H. Nakata, and M. Kokita, Influence of sulphur content and molten steel flow on entrapment of bubbles to solid/liquid interface, ISIJ Int., 46(2006), No. 12, p. 1817.
      [10]
      T.Y. Tsui, J. Vlassak, and W.D. Nix, Indentation plastic displacement field:Part Ⅱ. The case of hard films on soft substrates, J. Mater. Res., 14(1999), No. 6, p. 2204.
      [11]
      X. Li, Y.P. Bao, and M. Wang, Genetic evolution of inclusions in interstitial-free steel during the cold rolling processes, Trans. Indian Inst. Met., 71(2018), No. 5, p. 1067.
      [12]
      H.L. Yu, X.H. Liu, H.Y. Bi, and L.Q. Chen, Deformation behavior of inclusions in stainless steel strips during multi-pass cold rolling, J. Mater. Process. Technol., 209(2009), No. 1, p. 455.
      [13]
      I. Ohnaka, Mathematical analysis of solute redistribution during solidification with diffusion, Trans. Iron Steel Inst. Jpn., 26(1986), No. 12, p. 1045.
      [14]
      H.Y. Liu, H.L. Wang, L. Li, J.Q. Zheng, Y.H. Li, and X.Y. Zeng, Investigation of Ti inclusions in wire cord steel, Ironmaking Steelmaking, 38(2011), No. 1, p. 53.
      [15]
      J.H. Shang, X.J. Wang, and Y.Z. Chu, Recent development on precipitation behaviour of second-phase particles in Ti-IF steels during hot rolling, J. Iron Steel Res., 12(2000), No. 6, p. 55.
      [16]
      H. Goto, K.I. Miyazawa, K.I. Yamaguchi, S. Oglibayashi, and K. Tanaka, Effect of cooling rate on oxide precipitation during solidification of low carbon steels, ISIJ Int., 34(1994), No. 5, p. 414.
      [17]
      H.J. Wu, N. Wei, Y.P. Bao, G.X. Wang, C.P. Xiao, and J.J. Liu, Effect of M-EMS on the solidification structure of a steel billet, Int. J. Miner. Metall. Mater., 18(2011), No. 2, p. 159.
      • Relative Articles
      Cited By

    Catalog


    • /

      返回文章
      返回

      版权所有 ©《矿物冶金与材料学报（英文）》编辑部

      地址：北京市海淀区学院路30号邮政编码：100083

      电子邮箱：journal@ustb.edu.cn电话：+86-10-62332875

      本系统由 北京仁和汇智信息技术有限公司 开发    百度统计