| Cite this article as: |
Er-hu Qu, Ming-zhe Li, and Rui Li, Improving effect on forming quality and accuracy using a polyurethane board positioning/resetting the discrete steel pad in multi-point forming, Int. J. Miner. Metall. Mater., 26(2019), No. 4, pp. 447-459. https://doi.org/10.1007/s12613-019-1752-6
|
Ming-zhe Li E-mail: limz@jlu.edu.cn
| [1] |
M.Z. Li, S.H. Li, G.Q. Li, Z. Liu, and Y.H. Liu, Numerical simulation on multi-point forming technique for sheet metal parts, J. Plast. Eng., 6(1999), No. 2, p. 37.
|
| [2] |
E.H. Qu, M.Z. Li, R. Li, M.Y. Cui, and J.L. Lin, Research on formability in multi-point forming with different elastic pads, Int. J. Adv. Manuf. Technol., 98(2018), No. 5-8, p. 1887.
|
| [3] |
Z.Y. Cai and M.Z. Li, Optimum path forming technique for sheet metal and its realization in multi-point forming, J. Mater. Process. Technol., 110(2001), No. 2, p. 136.
|
| [4] |
X. Li, M.Z. Li, and Z.Y. Cai, Effect of elastic medium on the forming quality in multi-point forming process, J. Harbin Inst. Technol., 37(2005), No. 2, p. 194.
|
| [5] |
M.Z. Li, Z.Y. Cai, and X.J. Cui, Multi-point forming-a new flexible forming process for sheet metal, Metal. Form. Technol., 20(2002), No. 6, p. 5.
|
| [6] |
F.X. Tan, M.Z. Li, and Z.Y. Cai, Research on the process of multi-point forming for the customized titanium alloy cranial prosthesis, J. Mater. Process. Technol., 187-188(2007), p. 453.
|
| [7] |
Q. Zhang, Z.R. Wang, and T.A. Dean, Multi-point sandwich forming of a spherical sector with tool-shape compensation, J. Mater. Process. Technol., 194(2007), No. 1-3, p. 74.
|
| [8] |
B. Zareh-Desari, B. Davoodi, and A. Vedaei-Sabegh, Investigation of deep drawing concept of multi-point forming process in terms of prevalent defects, Int. J. Mater. Form., 10(2017), No. 2, p. 193.
|
| [9] |
B. Beglarzadeh and B. Davoodi, Numerical simulation and experimental examination of forming defects in multi-point deep drawing process, Mechanika, 22(2016), No. 3, p. 182.
|
| [10] |
Y.J. Liu, M.Z. Li, and F.F. Ju, Research on the process of flexible blank holder in multi-point forming for spherical surface parts, Int. J. Adv. Manuf. Technol., 89(2016), No. 5-8, p. 2315.
|
| [11] |
M. Abebe, K. Lee, and B.S. Kang, Surrogate-based multi-point forming process optimization for dimpling and wrinkling reduction, Int. J. Adv. Manuf. Technol., 85(2016), No. 1-4, p. 391.
|
| [12] |
M. Abosaf, K. Essa, A. Alghawail, A. Tolipov, S.Z. Su, and D. Pham, Optimisation of multi-point forming process parameters, Int. J. Adv. Manuf. Technol., 92(2017), No. 5-8, p. 1849.
|
| [13] |
E.H. Qu, M.Z. Li, R. Li, L. Zhao, and Z. Yi, Inhibitory effects of a flexible steel pad on wrinkling in multi-point die forming, Int. J. Adv. Manuf. Technol., 95(2017), No. 5-8, p. 2413.
|
| [14] |
J. Xing, M.Z. Li, Y.Y. Cheng, B.L. Wang, Z. Yang, and Y. Wang, Effect of the arrangement of the punch units in multi-point stretch forming process, Int. J. Adv. Manuf. Technol., 86(2016) No. 5-8, p. 2309.
|
| [15] |
Z.W. Liu, M.Z. Li, and Q.G. Han, Multi-point forming with wrinkle resistance function and its forming accuracy, J. Mech. Eng., 48(2012), No. 12, p. 56.
|
| [16] |
Y. Li, W.Z. Fu, M.Z. Li, X.D. Liu, S. Sun, and Z. Yi, Influence of deformation path on the forming effect in a multistep flexible rolling process, Int. J. Miner. Metall. Mater., 25(2018), No. 10, p. 1173.
|
| [17] |
Y. Jing, H.M. Zhang, H. Wu, L.J. Li, H.B. Jia, and Z.Y. Jiang, Effects of microrolling parameters on the microstructure and deformation behavior of pure copper, Int. J. Miner. Metall. Mater., 25(2018), No. 1, p. 45.
|
本系统由
北京仁和汇智信息技术有限公司
开发
下载: