留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 26 Issue 5
May  2019
Turn off MathJax
目录
数据统计

分享

计量
  • 文章访问数:  584
  • HTML全文浏览量:  123
  • PDF下载量:  12
  • 被引次数: 0
文章导航 >  矿物冶金与材料学报（英文）  > 2019  >  26(5): 597-610
Yu Shao, Li-ming Yu, Yong-chang Liu, Zong-qing Ma, Hui-jun Li,  and Jie-feng Wu, Hot deformation behaviors of a 9Cr oxide dispersion-strengthened steel and its microstructure characterization, Int. J. Miner. Metall. Mater., 26(2019), No. 5, pp. 597-610. https://doi.org/10.1007/s12613-019-1768-y
Cite this article as:
Yu Shao, Li-ming Yu, Yong-chang Liu, Zong-qing Ma, Hui-jun Li,  and Jie-feng Wu, Hot deformation behaviors of a 9Cr oxide dispersion-strengthened steel and its microstructure characterization, Int. J. Miner. Metall. Mater., 26(2019), No. 5, pp. 597-610. https://doi.org/10.1007/s12613-019-1768-y
shu
引用本文 PDF XML SpringerLink
研究论文

Hot deformation behaviors of a 9Cr oxide dispersion-strengthened steel and its microstructure characterization

  • State Key Lab of Hydraulic Engineering Simulation and Safety, Tianjin Key Lab of Composite and Functional Materials, Tianjin University, Tianjin 300350, China

  • Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031, China

  • 通讯作者:

    Li-ming Yu    E-mail: lmyu@tju.edu.cn

    Yong-chang Liu    E-mail: ycliu@tju.edu.cn

  • The hot deformation behaviors of a 9Cr oxide dispersion-strengthened (9Cr-ODS) steel fabricated by mechanical alloying and hot isostatic pressing (HIP) were investigated. Hot compression deformation experiments were conducted on a Gleeble 3500 simulator in a temperature range of 950-1100℃ and strain rate range of 0.001-1 s-1. The constitutive equation that can accurately describe the relationship between the rheological stress and the strain rate of the 9Cr-ODS steel was established, and the deformation activation energy was calculated as 780.817 kJ/mol according to the data obtained. The processing maps of 9Cr-ODS in the strain range of 0.1-0.6 were also developed. The results show that the region with high power dissipation efficiency corresponds to a completely recrystallized structure. The optimal processing conditions were determined as a temperature range of 1000-1050℃ with strain rate between 0.003 and 0.01 s-1.
    • Research Article

    Hot deformation behaviors of a 9Cr oxide dispersion-strengthened steel and its microstructure characterization

    + Author Affiliations
      Abstract
    • The hot deformation behaviors of a 9Cr oxide dispersion-strengthened (9Cr-ODS) steel fabricated by mechanical alloying and hot isostatic pressing (HIP) were investigated. Hot compression deformation experiments were conducted on a Gleeble 3500 simulator in a temperature range of 950-1100℃ and strain rate range of 0.001-1 s-1. The constitutive equation that can accurately describe the relationship between the rheological stress and the strain rate of the 9Cr-ODS steel was established, and the deformation activation energy was calculated as 780.817 kJ/mol according to the data obtained. The processing maps of 9Cr-ODS in the strain range of 0.1-0.6 were also developed. The results show that the region with high power dissipation efficiency corresponds to a completely recrystallized structure. The optimal processing conditions were determined as a temperature range of 1000-1050℃ with strain rate between 0.003 and 0.01 s-1.
      • FullText(HTML)
    • loading
      • Supplements(0)
      • References(47)
    • [1]
      S. Chu and A. Majumdar, Opportunities and challenges for a sustainable energy future, Nature, 488(2012), No. 7411, p. 294.
      [2]
      H.Q. Dong, L.M. Yu, Y.C. Liu, C.X. Liu, H.J. Li, and J.F. Wu, Effect of hafnium addition on the microstructure and tensile properties of aluminum added high-Cr ODS steels, J. Alloys Compd., 702(2017), p. 538.
      [3]
      H. Xu, Z. Lu, D. Wang, and C. Liu, Microstructure refinement and strengthening mechanisms of a 9Cr oxide dispersion strengthened steel by zirconium addition, Nucl. Eng. Technol., 49(2017), No. 1, p. 178.
      [4]
      G.M. Zhang, Z.J. Zhou, K. Mo, P.H. Wang, Y.B. Miao, S.F. Li, M. Wang, X. Liu, M.Q. Gong, J. Almer, and J.F. Stubbins, The microstructure and mechanical properties of Al-containing 9Cr ODS ferritic alloy, J. Alloys Compd., 648(2015), p. 223.
      [5]
      Q. Zhao, L.M. Yu, Y.C. Liu, Y. Huang, Z.Q. Ma, and H.J. Li, Effects of aluminum and titanium on the microstructure of ODS steels fabricated by hot pressing, Int. J. Miner. Metall. Mater., 25(2018), No. 10, p. 1156.
      [6]
      S. Ukai, M. Harada, H. Okada, M. Inoue, S. Nomura, S. Shikakura, K. Asabe, T. Nishida, and M. Fujiwara, Alloying design of oxide dispersion strengthened ferritic steel for long life FBRs core materials, J. Nucl. Mater., 204(1993), p. 65.
      [7]
      C. Suryanarayana and N. Al-Aqeeli, Mechanically alloyed nanocomposites, Prog. Mater. Sci., 58(2013), No. 4, p. 383.
      [8]
      S. Ukai and M. Fujiwara, Perspective of ODS alloys application in nuclear environments, J. Nucl. Mater., 307-311(2002), p. 749.
      [9]
      G.R. Odette, M.J. Alinger, and B.D. Wirth, Recent developments in irradiation-resistant steels, Ann. Rev. Mater. Res., 38(2008), p. 471.
      [10]
      E.J. Mittemeijer, Fundamentals of Materials Science, Springer Berlin, Heidelberg, 2011, p. 101.
      [11]
      Y. Sugino, S. Ukai, N. Oono, S. Hayashi, T. Kaito, S. Ohtsuka, H. Masuda, S. Taniguchi, and E. Sato, High temperature deformation mechanism of 15CrODS ferritic steels at cold-rolled and recrystallized conditions, J. Nucl. Mater., 466(2015), p. 653.
      [12]
      E. Aydogan, O. El-Atwani, S. Takajo, S.C. Vogel, and S.A. Maloy, High temperature microstructural stability and recrystallization mechanisms in 14YWT alloys, Acta Mater., 148(2018), p. 467.
      [13]
      Y. Sugino, S. Ukai, B. Leng, N. Oono, S. Hayashi, T. Kaito, and S. Ohtsuka, Grain boundary sliding at high temperature deformation in cold-rolled ODS ferritic steels, J. Nucl. Mater., 452(2014), No. 1-3, p. 628.
      [14]
      Z.B. Zhang and W.G. Pantheon, Response of oxide nanoparticles in an oxide dispersion strengthened steel to dynamic plastic deformation, Acta Mater., 149(2018), p. 235.
      [15]
      Y.C. Lin and X.M. Chen, A critical review of experimental results and constitutive descriptions for metals and alloys in hot working, Mater. Des., 32(2011), No. 4, p. 1733.
      [16]
      S.B. Davenport, N.J. Silk, C.N. Sparks, and C.M. Sellars, Development of constitutive equations for modelling of hot rolling, Mater. Sci. Technol., 16(2000), No. 5, p. 539.
      [17]
      Y.V.R.K. Prasad, H.L. Gegel, S.M. Doraivelu, J.C. Malas, J.T. Morgan, K.A. Lark, and D.R. Barker, Modeling of dynamic material behavior in hot deformation:Forging of Ti-6242, Metall. Trans. A, 15(1984), No. 10, p. 1883.
      [18]
      H. Zhang, H.J. Li, Q.Y. Guo, Y.C. Liu, and L.M. Yu, Hot deformation behavior of Ti-22Al-25Nb alloy by processing maps and kinetic analysis, J. Mater. Res., 31(2016), No. 12, p. 1764.
      [19]
      Z.H. Yao, S.C. Wu, J.X. Dong, Q.Y. Yu, M.C. Zhang, and G.W. Han, Constitutive behavior and processing maps of low-expansion GH909 superalloy, Int. J. Miner. Metall. Mater., 24(2017), No. 4, p. 432.
      [20]
      S. Huang, L. Wang, X.T. Lian, G.P. Zhao, F.F. Li, and X.M. Zhang, Hot deformation map and its application of GH4706 alloy, Int. J. Miner. Metall. Mater., 21(2014), No. 5, p. 462.
      [21]
      J.Q. Zhang, H.S. Di, K. Mao, X.Y. Wang, Z.J. Han, and T.J. Ma, Processing maps for hot deformation of a high-Mn TWIP steel:A comparative study of various criteria based on dynamic materials model, Mater. Sci. Eng. A, 587(2013), p. 110.
      [22]
      Y.T. Wu, Y.C. Liu, C. Li, X.C. Xia, Y. Huang, H.J. Li, and H.P. Wang, Deformation behavior and processing maps of Ni3Al-based superalloy during isothermal hot compression, J. Alloys Compd., 712(2017), p. 687.
      [23]
      Z.Y. Ding, Q.D. Hu, L. Zeng, and J.G. Li, Hot deformation characteristics of as-cast high-Cr ultra-super-critical rotor steel with columnar grains, Int. J. Miner. Metall. Mater., 23(2016), No. 11, p. 1275.
      [24]
      R.H. Zhang, Z.A. Zhou, M.W. Guo, J.J. Qi, S.H. Sun, and W.T. Fu, Hot deformation mechanism and microstructure evolution of an ultra-high nitrogen austenitic steel containing Nb and V, Int. J. Miner. Metall. Mater., 22(2015), No. 10, p. 1043.
      [25]
      X.H. Yue, C.F. Liu, H.H. Liu, S.F. Xiao, Z.H. Tang, and T.Tang, Effects of hot compression deformation temperature on the microstructure and properties of Al-Zr-La alloys, Int. J. Miner. Metall. Mater., 25(2018), No. 2, p. 236.
      [26]
      M. Yamamoto, S. Ukai, S. Hayashi, T. Kaito, and S. Ohtsuka, Formation of residual ferrite in 9Cr-ODS ferritic steels, Mater. Sci. Eng. A, 527(2010), No. 16-17, p. 4418.
      [27]
      H. Sakasegawa, M. Tamura, S. Ohtsuka, S. Ukai, H. Tanigawa, A. Kohyama, and M. Fujiwara, Precipitation behavior of oxide particles in mechanically alloyed powder of oxide-dispersion-strengthened steel, J. Alloys Compd., 452(2008), No. 1, p. 2.
      [28]
      K.T. Park, K.G. Jin, S.H. Han, S.W. Hwang, K. Choi, and C.S. Lee, Stacking fault energy and plastic deformation of fully austenitic high manganese steels, Mater. Sci. Eng. A, 527(2010), No. 16-17, p. 3651.
      [29]
      X.M. Chen, Y.C. Lin, D.X. Wen, J.L. Zhang, and M. He, Dynamic recrystallization behavior of a typical nickel-based superalloy during hot deformation, Mater. Des., 57(2014), p. 568.
      [30]
      A. Seeger, J. Diehl, S. Mader, and H. Rebstock, Work-hardening and work-softening of face-centred cubic metal crystals, Philos. Mag. A, 2(1957), No. 15, p. 323.
      [31]
      J.J. Jonas, C.M. Sellars, and W.J.M. Tegart, Strength and structure under hot-working conditions, Metall. Rev., 14(1969), No. 1, p. 1.
      [32]
      M.F. Abbod, C.M. Sellars, A. Tanaka. D.A. Linkens, and M. Mahfouf, Effect of changing strain rate on flow stress during hot deformation of Type 316L stainless steel, Mater. Sci. Eng. A, 491(2008), No. 1-2, p. 290.
      [33]
      C. Capdevila, G. Pimentel, M.M. Aranda, R. Rementeria, K. Dawson, E. Urones-Garrote, G.J. Tatlock, and M.K. Miller, Role of Y-Al oxides during extended recovery process of a ferritic ODS alloy, JOM, 67(2015), No. 10, p. 2208.
      [34]
      W.F. Zhang, W. Sha, W. Yan, W. Wang, Y.Y. Shan, and K. Yang, Analysis of deformation behavior and workability of advanced 9Cr-Nb-V ferritic heat resistant steels, Mater. Sci. Eng. A, 604(2014), p. 207.
      [35]
      H.T. Zhao, G.Q. Liu, and L. Xu, Rate-controlling mechanisms of hot deformation in a medium carbon vanadium microalloy steel, Mater. Sci. Eng. A, 559(2013), p. 262.
      [36]
      S.F. Medina and C.A. Hernandez, General expression of the Zener-Hollomon parameter as a function of the chemical composition of low alloy and microalloyed steels, Acta Mater., 44(1996), No. 1, p. 137.
      [37]
      J. Dong, C. Li, C.X. Liu, Y. Huang, L.M. Yu, H.J. Li, and Y.C. Liu, Hot deformation behavior and microstructural evolution of Nb-V-Ti microalloyed ultra-high strength steel, J. Mater. Res., 32(2017), No. 19, p. 3777.
      [38]
      C. Zener and J.H. Hollomon, Effect of strain rate upon plastic flow of steel, J. Appl. Phys., 15(1944), No. 1, p. 22.
      [39]
      R. Raj, Development of a processing map for use in warm-forming and hot-forming processes, Metall. Trans. A, 12(1981), No. 6, p. 1089.
      [40]
      Y.V.R.K. Prasad and T. Seshacharyulu, Modelling of hot deformation for microstructural control, Int. Mater. Rev., 43(1998), No. 6, p. 243.
      [41]
      P.Y. Zhao, Y.Z. Wang, and S.R. Niezgoda, Microstructural and micromechanical evolution during dynamic recrystallization, Int. J. Plast., 100(2017), p. 52.
      [42]
      H. Wu, S.P. Wen, H. Huang, X.L. Wu, K.Y. Gao, W. Wang, and Z.R. Nie, Hot deformation behavior and constitutive equation of a new type Al-Zn-Mg-Er-Zr alloy during isothermal compression, Mater. Sci. Eng. A, 651(2016), p. 415.
      [43]
      D.X. Wen, Y.C. Lin, H.B. Li, X.M. Chen, J. Deng, and L.T. Li, Hot deformation behavior and processing map of a typical Ni-based superalloy, Mater. Sci. Eng. A, 591(2014), p. 183.
      [44]
      H. Farnoush, A. Momeni, K. Dehghani, J. Aghazadeh Mohandesi, and H. Keshmiri, Hot deformation characteristics of 2205 duplex stainless steel based on the behavior of constituent phases, Mater. Des., 31(2010), No. 1, p. 220.
      [45]
      S.L. Sun, M.G. Zhang, and W.W. He, Hot deformation behavior and hot processing map of P92 steel, Adv. Mater. Res., 97-101(2010), p. 290.
      [46]
      A. Galiyev, R. Kaibyshev, and G. Gottstein, Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK60, Acta Mater., 49(2001), No. 7, p. 1199.
      [47]
      S.S.S. Kumar, T. Raghu, P.P. Bhattacharjee, G.A. Rao, and U. Borah, Strain rate dependent microstructural evolution during hot deformation of a hot isostatically processed nickel base superalloy, J. Alloys Compd., 681(2016), p. 28.
      • Relative Articles
      Cited By

    Catalog


    • /

      返回文章
      返回

      版权所有 ©《矿物冶金与材料学报（英文）》编辑部

      地址：北京市海淀区学院路30号邮政编码：100083

      电子邮箱：journal@ustb.edu.cn电话：+86-10-62332875

      本系统由 北京仁和汇智信息技术有限公司 开发    百度统计