Erosion-corrosion behavior of SAF3207 hyper-duplex stainless steel

Hong-liang Xiang; Yu-rui Hu; Hua-tang Cao; Dong Liu; Xuan-pu Dong

doi:10.1007/s12613-019-1825-6

Volume 26 Issue 11

Nov. 2019

计量

文章访问数: 675
HTML全文浏览量: 176
PDF下载量: 23
被引次数: 0

文章导航 > 矿物冶金与材料学报（英文版） > 2019 > 26(11) : 1415-1426. > DOI: 10.1007/s12613-019-1825-6

Cite this article as:

Hong-liang Xiang, Yu-rui Hu, Hua-tang Cao, Dong Liu, and Xuan-pu Dong, Erosion-corrosion behavior of SAF3207 hyper-duplex stainless steel, Int. J. Miner. Metall. Mater., 26(2019), No. 11, pp.1415-1426. https://dx.doi.org/10.1007/s12613-019-1825-6

引用本文 PDF XML SpringerLink

研究论文

Erosion-corrosion behavior of SAF3207 hyper-duplex stainless steel

Hong-liang Xiang^1,2), ,,
Yu-rui Hu¹⁾,
Hua-tang Cao^3), ,,
Dong Liu¹⁾,
Xuan-pu Dong⁴⁾

School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350108, China
Jinjiang Science and Education Park, Fuzhou University, Jinjiang 362251, China
Department of Advanced Production Engineering, Engineering and Technology Institute Groningen, University of Groningen, Nijenborgh 4, 9747AG, The Netherlands
State Key Laboratory of Materials Processing and Die&Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, China

基金项目:

This work was supported by the Major Special Program of Fujian Province, China (No. 2017HZ0001-2), the Joint Innovative Project for Industrial Technology of Fujian Province, China (No. FG-2016001), the Special Funds for Marine High-Tech Industry Development of the Fujian Province of China (High-Tech of Ocean and Fisheries of Fujian Province 2014 No. 14) and the Scientific Research Projects for Young Teachers of Education Department of Fujian Province, China (No. JAT160066).

通信作者:
Hong-liang Xiang E-mail: hlxiang@fzu.edu.cn

Hua-tang Cao E-mail: chtpmd@163.com

计量
- 文章访问数: 675
- HTML全文浏览量: 176
- PDF下载量: 23

中文摘要

Polarization curves and mass losses of SAF3207 hyper-duplex stainless steel under various conditions were measured. The damaged surfaces after erosion-corrosion tests were characterized by scanning electron microscopy. The results showed that an increase in flow velocity could enhance the electrochemical corrosion and consequently decrease the passivation properties of the steel. The erosion-corrosion damage of the samples increased substantially when the flow velocity exceeded the critical value of 4 m·s^-1. The mass loss rate increased as the sand content increased, reaching a maximum at 7wt% sand content, corresponding to the most severe electrochemical corrosion damage. When the sand content was increased further, however, the mass loss rate decreased and then tended stable. The mass loss was divided into incubation, sustained, and stationary periods, with a maximum mass loss rate of 12.97 g·h^-1·m^-2 after an erosion period of 2.5 h. The erosion-corrosion mechanism was investigated in detail.

关键词:

Research Article

Erosion-corrosion behavior of SAF3207 hyper-duplex stainless steel

Hong-liang Xiang^1,2), ,,
Yu-rui Hu¹⁾,
Hua-tang Cao^3), ,,
Dong Liu¹⁾,
Xuan-pu Dong⁴⁾

Author Affilications

School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350108, China
Jinjiang Science and Education Park, Fuzhou University, Jinjiang 362251, China
Department of Advanced Production Engineering, Engineering and Technology Institute Groningen, University of Groningen, Nijenborgh 4, 9747AG, The Netherlands
State Key Laboratory of Materials Processing and Die&Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, China

Funds:
This work was supported by the Major Special Program of Fujian Province, China (No. 2017HZ0001-2), the Joint Innovative Project for Industrial Technology of Fujian Province, China (No. FG-2016001), the Special Funds for Marine High-Tech Industry Development of the Fujian Province of China (High-Tech of Ocean and Fisheries of Fujian Province 2014 No. 14) and the Scientific Research Projects for Young Teachers of Education Department of Fujian Province, China (No. JAT160066).
Received: 15 May 2019; Revised: 27 July 2019; Accepted: 30 July 2019;

Abstract:

Keywords:

HTML全文

资源附件(0)

参考文献(25)

A.M. Rashidi, M. Packnezhad, M. Moshrefi-Torbati, and F.C. Walsh, Erosion-corrosion synergism in an alumina/sea water nanofluid, Microfluid. Nanofluid., 17(2014), No. 1, p. 225.

M.A.L. Hernández-Rodríguez, D. Martínez-Delgado, R. González, A. Pérez Unzueta, R.D. Mercado-Solís, and J. Rodríguez, Corrosive wear failure analysis in a natural gas pipeline, Wear, 263(2007), No. 1-6, p. 567.

H. Meng, X. Hu, and A. Neville, A systematic erosion-corrosion study of two stainless steels in marine conditions via experimental design, Wear, 263(2007), No. 1-6, p. 355.

L. Wei, Q.H. Zhao, and S.Z. Li, Relationship between the specific surface area of rust and the electrochemical behavior of rusted steel in a wet-dry acid corrosion environment, Int. J. Miner. Metall. Mater., 24(2017), No. 1, p. 55.

M.A. Islam and Z.N. Farhat, The synergistic effect between erosion and corrosion of API pipeline in CO₂ and saline medium, Tribol. Int., 68(2013), p. 26.

J.J. Shi and J. Ming, Influence of mill scale and rust layer on the corrosion resistance of low-alloy steel in simulated concrete pore solution, Int. J. Miner. Metall. Mater., 24(2017), No. 1, p. 64.

J. Zhu, Q.B. Zhang, Y. Chen, Z. Zhang, J.Q. Zhang, and C.N. Cao, Progress of study on erosion-corrosion, J. Chin. Soc. Corros. Prot., 34(2014), No. 3, p. 199.

I. Weibull, Duplex stainless steels and their application, particularly in centrifugal separators. Part A, History & Development, Mater. Des., 8(1987), No. 1, p. 35.

X. Gu, H.L. Xiang, Q.M. Lu, and Y.X. Wang, Effect of solution temperature on the microstructure and corrosion resistant of hyper duplex stainless steel, Spec. Cast. Nonferrous Alloys, 33(2013), No. 10, p. 899.

F.S. He, H.L. Xiang, X. Gu, and D. Lu, Cavitation erosion behavior of Cr₃₂Ni₇Mo₃N super duplex stainless steel, J. Univ. Sci. Technol. Beijing, 36(2014), No. 8, p. 1060.

H.C. Tian, X.Q. Cheng, Y. Wang, C.F. Dong, and X.G. Li, Effect of Mo on interaction between α/γ phases of duplex stainless steel, Electrochim. Acta, 267(2018), p. 255.

B.M. Wei, Corrosion Theory and Application of Metals, Chemical Industry Press, Beijing, 1984, p. 55.

Y.L. Cheng, Study of the Electrochemical Properties of the Corrosion of Aluminum Alloys in Neutral Sodium and Thin Electrolyte Layers[Dissertation], Zhejiang University, Zhejiang, 2003, p. 69.

H.L. Xiang, J.C. Fan, D. Liu, and X. Gu, Effects of antibacterial aging treatment on microstructure and properties of copper-containing duplex stainless steel II. Corrosion resistance and antibacterial properties, Acta. Metal. Sin., 48(2012), No. 9, p. 1089.

J.T. Huang, Theory and Application of Cavitation and Cavitation Erosion, Tsinghua University Press, Beijing, 1991, p. 113.

E.A.M. Hussain and M.J. Robinson, Erosion-corrosion of 2205 duplex stainless steel in flowing seawater containing sand particles, Corros. Sci., 49(2007), No. 4, p. 1737.

Y.G. Zheng, Z.M. Yao, K. Long, S.C. Li, and W. Ke, The development of liquid/solid two phase flow erosion experiment device and dynamic electrochemical test, Corros. Sci. Prot. Tech., 5(1993), No. 4, p. 286.

X.Y. Yong, Y.Z. Lin, J.J. Liu, and S.J. Liu, Erosion corrosion of duplex stainless steel in flowing neutral chloride containing sand, Acta. Metall. Sin., 37(2001), No. 7, p. 745.

X.X. Jiang, S.Z. Li, S. Li, Corrosive Wear of Metals, Chemical Industry Press, Beijing, 2002, p. 113.

M. Papini, D. Ciampini, T. Krajac, and J.K. Spelt, Computer modelling of interference effects in erosion testing:Effect of plume shape, Wear, 255(2003), No. 1-6, p. 85.

A. Neville, F. Reza, S. Chiovelli, and T. Revega, Erosion-corrosion behaviour of WC-based MMCs in liquid-solid slurries, Wear, 259(2005), No. 1-6, p. 181.

Y.G. Zheng, H. Yu, S.L. Jian, and Z.M. Yao, Effect of the sea mud on erosion-corrosion behaviors of carbon steel and low alloy steel in 2.4% NaCl solution, Wear, 264(2008), No. 11-12, p. 1051.

J.S. Sun, Wear of Metals, Metallurgical Industry Press, Beijing, 1992, p. 450.

W. Liu, Y.G. Zheng, Z.M. Yao, X.Q. Wu, and W. Ke, Cavitation erosion of 20SiMn and 0Cr13Ni5Mo steels in distilled water with and without sand, Acta. Metall. Sin., 37(2001), No. 2, p. 197.

Z.B. Zheng, Y.G. Zheng, W.H. Sun, and J.Q. Wang, Erosion-corrosion of HVOF-sprayed Fe-based amorphous metallic coating under impingement by a sand-containing NaCl solution, Corros. Sci., 76(2013), p. 337.

施引文献

Relative Articles

Backup roll contour of a SmartCrown tandem cold rolling mill

Int. J. Miner. Metall. Mater., 2008, 15(3): 357-361.

PDF View details

Guanghui Yang, Jianguo Cao, Jie Zhang, Shenghui Jia, Renwei Tan. Backup roll contour of a SmartCrown tandem cold rolling mill [J]. 矿物冶金与材料学报（英文版）. DOI: 10.1016/S1005-8850(08)60067-5

View details

Comprehensive contour prediction model of work rolls in hot wide strip mill

Int. J. Miner. Metall. Mater., 2007, 14(3): 240-245.

PDF View details

Xiaodong Wang, Quan Yang, Anrui He, Renzhong Wang. Comprehensive contour prediction model of work rolls in hot wide strip mill [J]. 矿物冶金与材料学报（英文版）. DOI: 10.1016/S1005-8850(07)60046-2

View details

A chaos genetic algorithm for optimizing an artificial neural network of predicting silicon content in hot metal

Int. J. Miner. Metall. Mater., 2003, 10(2): 68-71.

PDF View details

Deling Zheng, Ruixin Liang, Ying Zhou, Ying Wang. A chaos genetic algorithm for optimizing an artificial neural network of predicting silicon content in hot metal [J]. 矿物冶金与材料学报（英文版）.

View details

A hybrid genetic algorithm based on mutative scale chaos optimizationstrategy

Int. J. Miner. Metall. Mater., 2002, 9(6): 470-473.

PDF View details

Yan Wang, Hongwei Sun, Yikang Sun. A hybrid genetic algorithm based on mutative scale chaos optimizationstrategy [J]. 矿物冶金与材料学报（英文版）.

View details

Application of simulated annealing algorithm to improve work roll wear model in plate mills

Int. J. Miner. Metall. Mater., 2002, 9(3): 224-227.

PDF View details

Lin Sun, Qingdong Zhang, Xianlin Chen, Binghuo Wu, Zhihua Yu, Lanrong Li. Application of simulated annealing algorithm to improve work roll wear model in plate mills [J]. 矿物冶金与材料学报（英文版）.

View details

A New Genetic Algorithm Based on Niche Technique and Local Search Method

Int. J. Miner. Metall. Mater., 2001, 8(1): 63-68.

PDF View details

Jinwu Xu, Jiwen Liu. A New Genetic Algorithm Based on Niche Technique and Local Search Method [J]. 矿物冶金与材料学报（英文版）.

View details

Generalized Self-Adaptive Genetic Algorithms

Int. J. Miner. Metall. Mater., 2000, 7(1): 72-75.

PDF View details

Bin Wu, Xuyan Tu, Jian Wu. Generalized Self-Adaptive Genetic Algorithms [J]. 矿物冶金与材料学报（英文版）.

View details

Application of Genetic Algorithms in Identification of Linear Time-Varying System

Int. J. Miner. Metall. Mater., 2000, 7(1): 58-62.

PDF View details

Zhichun Mu, KeLiu, Zichao Wang, Datai Yu, D. Koshal, D. Pearce. Application of Genetic Algorithms in Identification of Linear Time-Varying System [J]. 矿物冶金与材料学报（英文版）.

View details

Stabilization of Chaotic Time Series by Proportional Pulse in the System Variable Based on Genetic Algorithm

Int. J. Miner. Metall. Mater., 1999, 6(3): 228-229.

PDF View details

Qing Li, Deling Zheng, Jianlong Zhou. Stabilization of Chaotic Time Series by Proportional Pulse in the System Variable Based on Genetic Algorithm [J]. 矿物冶金与材料学报（英文版）.

View details

Genetic Algorithm for the Thermal Stresses Optimum Design of Functionally Gradient Material Plate

Int. J. Miner. Metall. Mater., 1999, 6(3): 224-227.

PDF View details

Xiaodan Zhang, Zhengbin Tang, Changchun Ge. Genetic Algorithm for the Thermal Stresses Optimum Design of Functionally Gradient Material Plate [J]. 矿物冶金与材料学报（英文版）.

View details