留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 27 Issue 8
Aug.  2020

图(16)  / 表(2)

数据统计

分享

计量
  • 文章访问数:  6445
  • HTML全文浏览量:  2433
  • PDF下载量:  91
  • 被引次数: 0
Xu Zhao, Andy Fourie, Ryan Veenstra,  and Chong-chong Qi, Safety of barricades in cemented paste-backfilled stopes, Int. J. Miner. Metall. Mater., 27(2020), No. 8, pp. 1054-1064. https://doi.org/10.1007/s12613-020-2006-3
Cite this article as:
Xu Zhao, Andy Fourie, Ryan Veenstra,  and Chong-chong Qi, Safety of barricades in cemented paste-backfilled stopes, Int. J. Miner. Metall. Mater., 27(2020), No. 8, pp. 1054-1064. https://doi.org/10.1007/s12613-020-2006-3
引用本文 PDF XML SpringerLink
研究论文

膏体充填中挡墙安全性分析

  • Research Article

    Safety of barricades in cemented paste-backfilled stopes

    + Author Affiliations
    • In underground mining, there has been an increasing use of “cemented paste” for the backfilling of stopes. As this cemented paste backfill (CPB) enters the stope as a fluid, shotcrete barricades are often used to retain the fill material during and after the filling operations. However, failures of barricades have been reported around the world in recent years. This paper presents an analytical solution based on the elastic thin plate theory for calibrating the design of shotcrete barricades in underground mines using CPB. This solution was used to determine the quantitative relationships between the lateral loading from the paste and the barricade response during the backfilling process. The results show that the proposed solution agrees well with in situ data. According to the actual barricade responses, the acceptable tensile stress and an analysis method of cracks development are proposed. The proposed solution has practical significance for underground mines.

    • loading
    • [1]
      C. Qi, Big data management in the mining industry, Int. J. Miner. Metall. Mater., 27(2020), No. 2, p. 131. doi: 10.1007/s12613-019-1937-z
      [2]
      W. Zhou, X.Y. Shi, X. Lu, C.C. Qi, B.Y. Luan, and F.M. Liu, The mechanical and microstructural properties of refuse mudstone–GGBS–red mud based geopolymer composites made with sand, Constr. Build. Mater., 253(2020), art. No. 119193. doi: 10.1016/j.conbuildmat.2020.119193
      [3]
      M. Helinski, M. Fahey, and A. Fourie, Behavior of cemented paste backfill in two mine stopes: Measurements and modeling, J. Geotech. Geoenviron. Eng., 137(2011), No. 2, p. 171. doi: 10.1061/(ASCE)GT.1943-5606.0000418
      [4]
      M.L. Bloss, An operational perspective of mine backfill, [in] Proceedings of the 11th internactional Symposium on Mining with Backfill, Perth, 2014, p. 15.
      [5]
      C.C. Qi and A. Fourie, Cemented paste backfill for mineral tailings management: Review and future perspectives, Miner. Eng., 144(2019), art. No. 106025. doi: 10.1016/j.mineng.2019.106025
      [6]
      W.B. Xu, X.C. Tian, and P.W. Cao, Assessment of hydration process and mechanical properties of cemented paste backfill by electrical resistivity measurement, Nondestr. Test. Eval., 33(2018), No. 2, p. 198. doi: 10.1080/10589759.2017.1353983
      [7]
      N. Sivakugan, R. Veenstra, and N. Naguleswaran, Underground mine backfilling in Australia using paste fills and hydraulic fills, Int. J. Geosynth. Ground Eng., 1(2015), No. 2, art. No. 18. doi: 10.1007/s40891-015-0020-8
      [8]
      X. Zhao, A. Fourie, and C.C. Qi, An analytical solution for evaluating the safety of an exposed face in a paste backfill stope incorporating the arching phenomenon, Int. J. Miner. Metall. Mater., 26(2019), No. 10, p. 1206. doi: 10.1007/s12613-019-1885-7
      [9]
      H.Z. Jiao, S.F. Wang, A.X. Wu, H.M. Shen, and J.D. Wang, Cementitious property of NaAlO2-activated Ge slag as cement supplement, Int. J. Miner. Metall. Mater., 26(2019), No. 12, p. 1594. doi: 10.1007/s12613-019-1901-y
      [10]
      Y.Y. Tan, X. Yu, D. Elmo, L.H. Xu, and W.D. Song, Experimental study on dynamic mechanical property of cemented tailings backfill under SHPB impact loading, Int. J. Miner. Metall. Mater., 26(2019), No. 4, p. 404. doi: 10.1007/s12613-019-1749-1
      [11]
      W.B. Xu, P.W. Cao, and M.M. Tian, Strength development and microstructure evolution of cemented tailings backfill containing different binder types and contents, Minerals, 8(2018), No. 4, p. 167. doi: 10.3390/min8040167
      [12]
      M. Helinski, A. Fourie, M. Fahey, and M.I. Ismail, Assessment of the self-desiccation process in cemented mine backfills, Can. Geotech. J., 44(2007), No. 10, p. 1148. doi: 10.1139/T07-051
      [13]
      L. Cui and M. Fall, Modeling of pressure on retaining structures for underground fill mass, Tunnelling Underground Space Technol., 69(2017), p. 94. doi: 10.1016/j.tust.2017.06.010
      [14]
      S. Cao, E. Yilmaz, and W.D. Song, Fiber type effect on strength, toughness and microstructure of early age cemented tailings backfill, Constr. Build. Mater., 223(2019), p. 44. doi: 10.1016/j.conbuildmat.2019.06.221
      [15]
      M. Helinski, M. Fahey, and A. Fourie, Numerical modeling of cemented mine backfill deposition, J. Geotech. Geoenviron. Eng., 133(2007), No. 10, p. 1308. doi: 10.1061/(ASCE)1090-0241(2007)133:10(1308)
      [16]
      M.B. Revell and D.P. Sainsbury, Paste bulkhead failures, [in] Proceedings of International Symposium of MineFill07, Montreal, 2007.
      [17]
      M.B. Revell and D.P. Sainsbury, Advancing paste fill bulkhead design using numerical modeling, [in] Proceedings of International Symposium of MineFill07, Montreal, 2007.
      [18]
      N. Sivakugan, K. Rankine, and R. Rankine, Permeability of hydraulic fills and barricade bricks, Geotech. Geol. Eng., 24(2006), No. 3, p. 661. doi: 10.1007/s10706-005-2132-8
      [19]
      L.L. Li and M. Aubertin, Horizontal pressure on barricades for backfilled stopes. Part II: Submerged conditions, Can. Geotech. J., 46(2009), No. 1, p. 47. doi: 10.1139/T08-105
      [20]
      S. Cao, E. Yilmaz, W.D. Song, E. Yilmaz, and G.L. Xue, Loading rate effect on uniaxial compressive strength behavior and acoustic emission properties of cemented tailings backfill, Constr. Build. Mater., 213(2019), p. 313. doi: 10.1016/j.conbuildmat.2019.04.082
      [21]
      J. Li, J. Ferreira, and T.L. Lievre, Transition from discontinuous to continuous paste filling at Cannington Mine, [in] Proceedings of the 11th international Symposium on Mining with Backill, Perth, 2014, p. 381.
      [22]
      B.D. Thompson, W.F. Bawden, and M.W. Grabinsky, In situ measurements of cemented paste backfill at the Cayeli Mine, Can. Geotech. J., 49(2012), No. 7, p. 755. doi: 10.1139/t2012-040
      [23]
      S. Ghazi, Modeling of an Underground Mine Backfill Barricade [Dissertation], University of Toronto, Toronto, 2011.
      [24]
      A. Cheung, Influence of Rock Boundary Conditions on Behaviour of Arched and Flat Cemented Paste Backfill Barricade Walls [Dissertation], University of Toronto, Toronto, 2012.
      [25]
      Z. Gürdal, R.T. Haftka, and P. Hajela, Design and Optimization of Laminated Composite Materials, Wiley-Interscience, 1999.
      [26]
      Y.L. Huang, Ground Control Theory and Application of Solid Dense Backfill in Coal Mines [Dissertation], China University of Mining and Technology, Xuzhou, 2012.
      [27]
      S. Carmona and A. Aguado, New model for the indirect determination of the tensile stress–strain curve of concrete by means of the Brazilian test, Mater. Struct., 45(2012), No. 10, p. 1473. doi: 10.1617/s11527-012-9851-0

    Catalog


    • /

      返回文章
      返回