Cite this article as:

Zahra Amirsardari, Akram Dourani, Mohamad Ali Amirifar, and Nooredin Ghadiri Massoom, Comparative characterization of iridium loading on catalyst assessment under different conditions, Int. J. Miner. Metall. Mater., 28(2021), No. 7, pp.1233-1239. https://dx.doi.org/10.1007/s12613-020-2058-4
Zahra Amirsardari, Akram Dourani, Mohamad Ali Amirifar, and Nooredin Ghadiri Massoom, Comparative characterization of iridium loading on catalyst assessment under different conditions, Int. J. Miner. Metall. Mater., 28(2021), No. 7, pp.1233-1239. https://dx.doi.org/10.1007/s12613-020-2058-4
引用本文 PDF XML SpringerLink

不同条件下铱负载催化剂性能的比较研究

Comparative characterization of iridium loading on catalyst assessment under different conditions

Abstract: To discuss the potential role of iridium (Ir) nanoparticles loaded under atmospheric and high pressures, we prepared a series of catalysts with the same active phase but different contents of 10wt%, 20wt%, and 30wt% on gamma-alumina for decomposition of hydrazine. Under atmospheric pressure, the performance of the catalyst was better when 30wt% of the Ir nanoparticles was used with chelating agent that had greater selectivity of approximately 27%. The increase in the reaction rate from 175 to 220 h−1 at higher Ir loading (30wt%) was due to a good dispersion of high-number active phases rather than an agglomeration surface. As a satisfactory result of this investigation at high pressure, Ir catalysts with different weight percentages showed the same stability against crushing and activity with a characteristic velocity of approximately 1300 m/s.

 

/

返回文章
返回