Cite this article as: |
Nikhil, Gopal Ji, and Rajiv Prakash, Hydrothermal synthesis of Zn–Mg-based layered double hydroxide coatings for the corrosion protection of copper in chloride and hydroxide media, Int. J. Miner. Metall. Mater., 28(2021), No. 12, pp. 1991-2000. https://doi.org/10.1007/s12613-020-2122-0 |
Layered double hydroxides (LDHs) hinder corrosive elements by forming a double layer and locking them between its layers. Hence, LDHs are interesting materials in corrosion inhibition. In this work, Zn–Mg-based LDHs are grown over a copper substrate by using a hydrothermal method. Two types of Zn–Mg-based LDH coating are prepared based on hydrothermal reaction time. Both types are characterized through Fourier transform infrared spectroscopy, Raman spectroscopy, high-resolution scanning electron microscopy, energy dispersive X-ray analysis, atomic force microscopy, and X-ray diffraction. Results show that the two types of LDH coating are successfully grown on copper; however, they differ in thickness and structural configuration. Corrosion testing of the LDH coatings is executed in 0.1 M NaCl and 0.1 M NaOH through alternating current impedance measurements and Tafel polarization curves. Results show that L48 gives more than 90% protection to copper, which is higher than the protection provided by L24. However, both LDH coatings (L24 and L48) are more effective corrosion inhibitors in NaCl than in NaOH, suggesting that the LDH coatings can more efficiently exchange Cl ions than OH ions.
[1] |
Y. Jafari, S.M. Ghoreishi, and M. Shabani-Nooshabadi, Polyaniline/graphene nanocomposite coatings on copper: Electropolymerization, characterization, and evaluation of corrosion protection performance, Synth. Met., 217(2016), p. 220. doi: 10.1016/j.synthmet.2016.04.001
|
[2] |
D.Q. Zhang, Q.R. Cai, X.M. He, L.X. Gao, and G.D. Zhou, Inhibition effect of some amino acids on copper corrosion in HCl solution, Mater. Chem. Phys., 112(2008), No. 2, p. 353. doi: 10.1016/j.matchemphys.2008.05.060
|
[3] |
E.S.M. Sherif, Corrosion mitigation of copper in acidic chloride pickling solutions by 2-amino-5-ethyl-1,3,4-thiadiazole, J. Mater. Eng. Perform., 19(2010), No. 6, p. 873. doi: 10.1007/s11665-009-9542-3
|
[4] |
D.Q. Zhang, B. Xie, L.X. Gao, Q.R. Cai, H.G. Joo, and K.Y. Lee, Intramolecular synergistic effect of glutamic acid, cysteine and glycine against copper corrosion in hydrochloric acid solution, Thin Solid Films, 520(2011), No. 1, p. 356. doi: 10.1016/j.tsf.2011.07.009
|
[5] |
A.Y. El-Etre, Natural honey as corrosion inhibitor for metals and alloys. I. Copper in neutral aqueous solution, Corros. Sci., 40(1998), No. 11, p. 1845. doi: 10.1016/S0010-938X(98)00082-1
|
[6] |
N.A. Wazzan, DFT calculations of thiosemicarbazide, arylisothiocynates, and 1-aryl-2,5-dithiohydrazodicarbonamides as corrosion inhibitors of copper in an aqueous chloride solution, J. Ind. Eng. Chem., 26(2015), p. 291. doi: 10.1016/j.jiec.2014.11.043
|
[7] |
N. Karthik, Y.R. Lee, and M.G. Sethuraman, Hybrid sol–gel/thiourea binary coating for the mitigation of copper corrosion in neutral medium, Prog. Org. Coat., 102(2017), p. 259. doi: 10.1016/j.porgcoat.2016.10.024
|
[8] |
R. Farahati, A. Ghaffarinejad, S.M. Mousavi-Khoshdel, J. Rezania, H. Behzadi, and A. Shockravi, Synthesis and potential applications of some thiazoles as corrosion inhibitor of copper in 1 M HCl: Experimental and theoretical studies, Prog. Org. Coat., 132(2019), p. 417. doi: 10.1016/j.porgcoat.2019.04.005
|
[9] |
E. Alibakhshi, E. Ghasemi, M. Mahdavian, B. Ramezanzadeh, and S. Farashi, Active corrosion protection of Mg–Al–P
|
[10] |
E. Alibakhshi, E. Ghasemi, M. Mahdavian, and B. Ramezanzadeh, A comparative study on corrosion inhibitive effect of nitrate and phosphate intercalated Zn–Al-layered double hydroxides (LDHs) nanocontainers incorporated into a hybrid silane layer and their effect on cathodic delamination of epoxy topcoat, Corros. Sci., 115(2017), p. 159. doi: 10.1016/j.corsci.2016.12.001
|
[11] |
E. Alibakhshi, E. Ghasemi, M. Mahdavian, and B. Ramezanzadeh, Fabrication and characterization of layered double hydroxide/silane nanocomposite coatings for protection of mild steel, J. Taiwan Inst. Chem. Eng., 80(2017), p. 924. doi: 10.1016/j.jtice.2017.08.015
|
[12] |
G. Mishra, B. Dash, S. Pandey, and D. Sethi, Ternary layered double hydroxides (LDH) based on Cu-substituted Zn–Al for the design of efficient antibacterial ceramics, Appl. Clay Sci., 165(2018), p. 214. doi: 10.1016/j.clay.2018.08.021
|
[13] |
R.C. Zeng, X.T. Li, Z.G. Liu, F. Zhang, S.Q. Li, and H.Z. Cui, Corrosion resistance of Zn–Al layered double hydroxide/poly(lactic acid) composite coating on magnesium alloy AZ31, Front. Mater. Sci., 9(2015), No. 4, p. 355. doi: 10.1007/s11706-015-0307-7
|
[14] |
F. Zhang, Z.G. Liu, R.C. Zeng, S.Q. Li, H.Z. Cui, L. Song, and E.H. Han, Corrosion resistance of Mg–Al-LDH coating on magnesium alloy AZ31, Surf. Coat. Technol., 258(2014), p. 1152. doi: 10.1016/j.surfcoat.2014.07.017
|
[15] |
J.K. Lin, K.L. Jeng, and J.Y. Uan, Crystallization of a chemical conversion layer that forms on AZ91D magnesium alloy in carbonic acid, Corros. Sci., 53(2011), No. 11, p. 3832. doi: 10.1016/j.corsci.2011.07.035
|
[16] |
J.K. Lin, C.L. Hsia, and J.Y. Uan, Characterization of Mg,Al-hydrotalcite conversion film on Mg alloy and Cl− and
|
[17] |
G. Ji, S.K. Shukla, P. Dwivedi, S. Sundaram, and R. Prakash, Inhibitive effect of argemone mexicana plant extract on acid corrosion of mild steel, Ind. Eng. Chem. Res., 50(2011), No. 21, p. 11954. doi: 10.1021/ie201450d
|
[18] |
G. Ji, P. Dwivedi, S. Sundaram, and R. Prakash, Inhibitive effect of chlorophytum borivilianum root extract on mild steel corrosion in HCl and H2SO4 solutions, Ind. Eng. Chem. Res., 52(2013), No. 31, p. 10673. doi: 10.1021/ie4008387
|
[19] |
M. Tiwari, V.K. Gupta, R.A. Singh, G. Ji, and R. Prakash, Donor–π–acceptor-type configured, dimethylamino-based organic push–pull chromophores for effective reduction of mild steel corrosion loss in 1 M HCl, ACS Omega, 3(2018), No. 4, p. 4081. doi: 10.1021/acsomega.8b00083
|
[20] |
T. Ishizaki, S. Chiba, K. Watanabe, and H. Suzuki, Corrosion resistance of Mg–Al layered double hydroxide container-containing magnesium hydroxide films formed directly on magnesium alloy by chemical-free steam coating, J. Mater. Chem. A, 1(2013), No. 31, p. 8968. doi: 10.1039/c3ta11015j
|
[21] |
L.D. Wang, K.Y. Zhang, W. Sun, T.T. Wu, H.R. He, and G.C. Liu, Hydrothermal synthesis of corrosion resistant hydrotalcite conversion coating on AZ91D alloy, Mater. Lett., 106(2013), p. 111. doi: 10.1016/j.matlet.2013.05.018
|
[22] |
J.T. Kloprogge, L. Hickey, and R.L. Frost, FT-Raman and FT-IR spectroscopic study of synthetic Mg/Zn/Al-hydrotalcites, J. Raman Spectrosc., 35(2004), No. 11, p. 967. doi: 10.1002/jrs.1244
|
[23] |
P. Tiwari, M. Srivastava, R. Mishra, G. Ji, and R. Prakash, Economic use of waste Musa paradisica peels for effective control of mild steel loss in aggressive acid solutions, J. Environ. Chem. Eng., 6(2018), No. 4, p. 4773. doi: 10.1016/j.jece.2018.07.016
|
[24] |
M. Srivastava, P. Tiwari, S.K. Srivastava, A. Kumar, G. Ji, and R. Prakash, Low cost aqueous extract of Pisum sativum peels for inhibition of mild steel corrosion, J. Mol. Liq., 254(2018), p. 357. doi: 10.1016/j.molliq.2018.01.137
|
[25] |
G. Ji, S. Anjum, S. Sundaram, and R. Prakash, Musa paradisica peel extract as green corrosion inhibitor for mild steel in HCl solution, Corros. Sci., 90(2015), p. 107. doi: 10.1016/j.corsci.2014.10.002
|
[26] |
E.S. Ferreira, C. Giacomelli, F.C. Giacomelli, and A. Spinelli, Evaluation of the inhibitor effect of L-ascorbic acid on the corrosion of mild steel, Mater. Chem. Phys., 83(2004), No. 1, p. 129. doi: 10.1016/j.matchemphys.2003.09.020
|
[27] |
W.H. Li, Q. He, S.T. Zhang, C.L. Pei, and B.R. Hou, Some new triazole derivatives as inhibitors for mild steel corrosion in acidic medium, J. Appl. Electrochem., 38(2008), No. 3, p. 289. doi: 10.1007/s10800-007-9437-7
|
[28] |
G. Ji, P. Dwivedi, S. Sundaram, and R. Prakash, Aqueous extract of Argemone mexicana roots for effective protection of mild steel in an HCl environment, Res. Chem. Intermed., 42(2016), No. 2, p. 439. doi: 10.1007/s11164-015-2029-y
|
[29] |
T.F. Xiang, S.L. Zheng, M. Zhang, H.R. Sadig, and C. Li, Bioinspired slippery zinc phosphate coating for sustainable corrosion protection, ACS Sustainable Chem. Eng., 6(2018), No. 8, p. 10960. doi: 10.1021/acssuschemeng.8b02345
|
[30] |
H. Lgaz, R. Salghi, S. Jodeh, and B. Hammouti, Effect of clozapine on inhibition of mild steel corrosion in 1.0 M HCl medium, J. Mol. Liq., 225(2017), p. 271. doi: 10.1016/j.molliq.2016.11.039
|
[31] |
E. Alibakhshi, E. Ghasemi, M. Mahdavian, B. Ramezanzadeh, and M. Yasaei, The effect of interlayer spacing on the inhibitor release capability of layered double hydroxide based nanocontainers, J. Cleaner Prod., 251(2020), art. No. 119676. doi: 10.1016/j.jclepro.2019.119676
|
[32] |
M.M. Solomon, S.A. Umoren, and E.J. Abai, Poly(methacrylic acid)/silver nanoparticles composites: In-situ preparation, characterization and anticorrosion property for mild steel in H2SO4 solution, J. Mol. Liq., 212(2015), p. 340. doi: 10.1016/j.molliq.2015.09.028
|
[33] |
G. Ji, L.F. Macía, B. Allaert, A. Hubin, and H. Terryn, Odd random phase electrochemical impedance spectroscopy to study the corrosion behavior of hot dip Zn and Zn-alloy coated steel wires in sodium chloride solution, J. Electrochem. Soc., 165(2018), No. 5, p. 246. doi: 10.1149/2.0741805jes
|
[34] |
M.A. Arenas, I. Garcı́a, and J. de Damborenea, X-ray photoelectron spectroscopy study of the corrosion behaviour of galvanised steel implanted with rare earths, Corros. Sci., 46(2004), No. 4, p. 1033. doi: 10.1016/S0010-938X(03)00193-8
|
[35] |
C. Deslouis, M. Duprat, and C. Tournillon, The kinetics of zinc dissolution in aerated sodium sulphate solutions. A measurement of the corrosion rate by impedance techniques, Corros. Sci., 29(1989), No. 1, p. 13. doi: 10.1016/0010-938X(89)90077-2
|
[36] |
J.X. Xu, Y.B. Song, Y.H. Zhao, L.H. Jiang, Y.J. Mei, and P. Chen, Chloride removal and corrosion inhibitions of nitrate, nitrite-intercalated Mg–Al layered double hydroxides on steel in saturated calcium hydroxide solution, Appl. Clay Sci., 163(2018), p. 129. doi: 10.1016/j.clay.2018.07.023
|