| Cite this article as: |
Yong Zhang and Rui-xuan Li, Editorial for special issue on nanostructured high-entropy materials, Int. J. Miner. Metall. Mater., 27(2020), No. 10, pp. 1309-1311. https://doi.org/10.1007/s12613-020-2189-7
|
| [1] |
C.B. Wei, X.H. Du, Y.P. Lu, H. Jiang, T.J. Li, and T.M. Wang, Novel as-cast AlCrFe2Ni2Ti0.5 high entropy alloy with excellent mechanical properties, Int. J. Miner. Metall. Mater., 27(2020), No. 10, p. 1312. doi: 10.1007/s12613-020-2042-z
|
| [2] |
T.D. Huang, S.Y. Wu, H. Jiang, Y.P. Lu, T.M. Wang, and T.J. Li, Effect of Ti content on microstructure and properties of TixZrVNb refractory high-entropy alloys, Int. J. Miner. Metall. Mater., 27(2020), No. 10, p. 1318. doi: 10.1007/s12613-0202040-1
|
| [3] |
X.C. Ye, T. Wang, Z.Y. Xu, C. Liu, H.H. Wu, G.W. Zhao, and D. Fang, Effect of Ti content on microstructure and mechanical properties of CuCoFeNi high-entropy alloys, Int. J. Miner. Metall. Mater., 27(2020), No. 10, p. 1326. doi: 10.1007/s12613-020-2024-1
|
| [4] |
N. Malatji, A.P.I. Popoola, T. Lengopeng, and S. Pityana, Effect of Nb addition on the microstructural, mechanical and electrochemical characteristics of AlCrFeNiCu high-entropy alloy, Int. J. Miner. Metall. Mater., 27(2020), No. 10, p. 1332. doi: 10.1007/s12613-020-2178-x
|
| [5] |
M. Zhang, J.X. Hou, H.J. Yang, Y.Q. Tan, X.J. Wang, X.H. Shi, R.P. Guo, and J.W. Qiao, Tensile strength prediction of dual-phase Al0.6CoCrFeNi high-entropy alloys, Int. J. Miner. Metall. Mater., 27(2020), No. 10, p. 1341. doi: 10.1007/s12613-020-2084-2
|
| [6] |
F.K. Zheng, G.N. Zhang, X.J. Chen, X. Yang, Z.C. Yang, Y. Li, and J.T. Li, A new method of preparing high-performance high-entropy alloys through high-gravity combustion synthesis, Int. J. Miner. Metall. Mater., 27(2020), No. 10, p. 1347. doi: 10.1007/s12613-020-2028-x
|
| [7] |
R.B. Nair, H.S. Arora, and H.S. Grewal, Enhanced cavitation erosion resistance of a friction stir processed high entropy alloy, Int. J. Miner. Metall. Mater., 27(2020), No. 10, p. 1353. doi: 10.1007/s12613-020-2000-9
|
| [8] |
J.X. Hou, J. Fan, H.J. Yang, Z. Wang, and J.W. Qiao, Deformation behavior and plastic instabilities of boronized Al0.25CoCrFeNi high-entropy alloys, Int. J. Miner. Metall. Mater., 27(2020), No. 10, p. 1363. doi: 10.1007/s12613-020-1967-6
|
| [9] |
P. Song, C. Wang, J. Ren, Y. Sun, Y. Zhang, A. Bousquet, T. Sauvage, and E. Tomasella, Modulation of the cutoff wavelength in the spectra for solar selective absorbing coating based on high-entropy films, Int. J. Miner. Metall. Mater., 27(2020), No. 10, p. 1371. doi: 10.1007/s12613-020-1982-7
|
| [10] |
Q.W. Xing, J. Ma, and Y. Zhang, Phase thermal stability and mechanical properties analyses of (Cr,Fe,V)–(Ta,W) multiple-based elemental system using a compositional gradient film, Int. J. Miner. Metall. Mater., 27(2020), No. 10, p. 1379. doi: 10.1007/s12613-020-2063-7
|
| [11] |
C.D. Dai, Y. Fu, J.X. Guo, and C.W. Du, Effects of substrate temperature and deposition time on the morphology and corrosion resistance of FeCoCrNiMo0.3 high-entropy alloy coating fabricated by magnetron sputtering, Int. J. Miner. Metall. Mater., 27(2020), No. 10, p. 1388. doi: 10.1007/s12613-020-2149-2
|
| [12] |
U. Bhandari, C.Y. Zhang, S.M. Guo, and S.Z. Yang, First-principles study on the mechanical and thermodynamic properties of MoNbTaTiW, Int. J. Miner. Metall. Mater., 27(2020), No. 10, p. 1398. doi: 10.1007/s12613-020-2077-1
|
| [13] |
Z.S. Nong, H.Y. Wang, and J.C. Zhu, First-principles calculations of structural, elastic and electronic properties of (TaNb)0.67(HfZrTi)0.33 high-entropy alloy under high pressure, Int. J. Miner. Metall. Mater., 27(2020), No. 10, p. 1405. doi: 10.1007/s12613-020-2095-z
|
| [14] |
S.L. Zhang, W.Y. Chen, N. Cui, Q.Q. Wu, and Y.L. Su, Giant magneto impedance effect of Co-rich amorphous fibers under magnetic interaction, Int. J. Miner. Metall. Mater., 27(2020), No. 10, p. 1415. doi: 10.1007/s12613-020-1968-5
|
本系统由
北京仁和汇智信息技术有限公司
开发
下载: