Cite this article as: |
Kuo-Chih Chou, General solution model and its new progress, Int. J. Miner. Metall. Mater., 29(2022), No. 4, pp. 577-585. https://doi.org/10.1007/s12613-022-2411-x |
周国治 E-mail: kcc126@126.com
Supplementary Informations12613-022-2411-x.doc |
[1] |
J.H. Hildebrand, Solubility. XII. regular solutions, J. Am. Chem. Soc., 51(1929), No. 1, p. 66. doi: 10.1021/ja01376a009
|
[2] |
J.H. Hildebrand, The term ‘regular solution’, Nature, 168(1951), No. 4281, art. No. 868.
|
[3] |
G. Scatchard, S.E. Wood, and J.M. Mochel, Vapor−liquid equilibrium. V. Carbon tetrachloride–benzene mixtures, J. Am. Chem. Soc., 62(1940), No. 4, p. 712. doi: 10.1021/ja01861a006
|
[4] |
G. Scatchard, S.E. Wood, and J.M. Mochel, Vapor−liquid equilibrium. VI. Benzene–methanol mixtures, J. Am. Chem. Soc., 68(1946), No. 10, p. 1957. doi: 10.1021/ja01214a024
|
[5] |
G. Scatchard, S.E. Wood, and J.M. Mochel, Vapor−liquid equilibrium. VII. Carbon tetrachloride–methanol mixtures, J. Am. Chem. Soc., 68(1946), No. 10, p. 1960. doi: 10.1021/ja01214a025
|
[6] |
G. Scatchard and L.B. Ticknor, Vapor−liquid equilibrium. IX. The methanol–carbon tetrachloride–benzene system, J. Am. Chem. Soc., 74(1952), No. 15, p. 3724. doi: 10.1021/ja01135a003
|
[7] |
O. Redlich and A.T. Kister, Algebraic representation of thermodynamic properties and the classification of solutions, Ind. Eng. Chem., 40(1948), No. 2, p. 345. doi: 10.1021/ie50458a036
|
[8] |
G. Scatchard, L.B. Ticknor, J.R. Goates, and E.R. McCartney, Heats of mixing in some non-electrolyte solutions, J. Am. Chem. Soc., 74(1952), No. 15, p. 3721. doi: 10.1021/ja01135a002
|
[9] |
G. Scatchard, G.M. Kavanagh, and L.B. Ticknor, Vapor−liquid equilibrium. VIII. Hydrogen peroxide–water mixtures, J. Am. Chem. Soc., 74(1952), No. 15, p. 3715. doi: 10.1021/ja01135a001
|
[10] |
G. Scatchard, Solutions of nonelectrolytes, Annu. Rev. Phys. Chem., 3(1952), p. 259. doi: 10.1146/annurev.pc.03.100152.001355
|
[11] |
F. Kohler, Zur berechnung der thermodynamischen daten eines ternären systems aus den zugehörigen binären systemen, Monatshefte Für Chemie Und Verwandte Teile Anderer Wissenschaften, 91(1960), No. 4, p. 738.
|
[12] |
G.W. Toop, Predicting ternary activities using binary data, Trans. Metall. Soc. AIME, 1965, 233, p. 850.
|
[13] |
C. Colinet, Thesis University of Grenoble, France, 1967.
|
[14] |
Y.M. Muggianu, M. Gambino, and J.P. Bros, Enthalpies de formation des alliages liquides bismuth-étain-gallium à 723 K. Choix d’une représentation analytique des grandeurs d’excès intégrales et partielles de mélange, J. Chim. Phys., 72(1975), p. 83. doi: 10.1051/jcp/1975720083
|
[15] |
M. Hillert, Empirical methods of predicting and representing thermodynamic properties of ternary solution phases, Calphad, 4(1980), No. 1, p. 1. doi: 10.1016/0364-5916(80)90016-4
|
[16] |
K.C. Chou, A new solution model for predicting ternary thermodynamic properties, Calphad, 11(1987), No. 3, p. 293. doi: 10.1016/0364-5916(87)90048-4
|
[17] |
I. Ansara, Comparison of methods for thermodynamic calculation of phase diagrams, Int. Mater. Rev., 24(1979), No. 1, p. 20. doi: 10.1179/095066079790136417
|
[18] |
K.C. Chou and Y. Austin Chang, A study of ternary geometrical models, Berichte Der Bunsengesellschaft Für Physikalische Chemie, 93(1989), No. 6, p. 735. doi: 10.1002/bbpc.19890930615
|
[19] |
G. Kalies, C. Reichenbach, R. Rockmann, D. Enke, P. Bräuer, and M. Jaroniec, Further advancements in predicting adsorption equilibria using excess formalism: Calculation of adsorption excesses at the liquid/solid interface, J. Colloid Interface Sci., 352(2010), No. 2, p. 504. doi: 10.1016/j.jcis.2010.08.046
|
[20] |
L.C. Prasad and A. Mikula, Surface segregation and surface tension in Al–Sn–Zn liquid alloys, Phys. B Condens. Matter, 373(2006), No. 1, p. 142. doi: 10.1016/j.physb.2005.11.113
|
[21] |
H. Iloukhani and K. Khanlarzadeh, Physicochemical properties of quaternary systems and comparison of different geometrical models, J. Chem. Eng. Data, 56(2011), No. 11, p. 4244. doi: 10.1021/je200873y
|
[22] |
V.F. Nikolaev, A.N. Satgaraev, and R.B. Sultanova, Predicting property isotherms of ternary mixtures on isotherms of the binary mixtures, presented by a non-stoichiometric model, J. Solut. Chem., 41(2012), No. 6, p. 953. doi: 10.1007/s10953-012-9849-9
|
[23] |
L.C. Prasad and R.K. Jha, Correlation between bulk and surface properties of ternary Ag–Sn–Zn liquid alloys and concerned binaries, Phys. Chem. Liq., 45(2007), No. 2, p. 149. doi: 10.1080/00319100600928836
|
[24] |
L.C. Prasad and A. Mikula, Thermodynamics of liquid Al–Sn–Zn alloys and concerned binaries in the light of soldering characteristics, Phys. B Condens. Matter, 373(2006), No. 1, p. 64. doi: 10.1016/j.physb.2005.11.073
|
[25] |
E. Bonnier and R. Caboz, Sur l'estimation de l'entalpie libre de me'lange de certaines alliages metalliques liquides ternaires, Comptes Rendus Hebdomadaires Des Seances De L Academie Des Sciences, 250(1960), p. 527.
|
[26] |
C.C. Tsao and J.M. Smith, Applied thermodynamics, Chem. Eng. Prog. Symp.,Ser., 49(1953), p. 107.
|
[27] |
K.C. Chou, A general solution model for predicting ternary thermodynamic properties, Calphad, 19(1995), No. 3, p. 315. doi: 10.1016/0364-5916(95)00029-E
|
[28] |
K.C. Chou and S.K. Wei, A new generation solution model for predicting thermodynamic properties of a multicomponent system from binaries, Metall. Mater. Trans. B, 28(1997), No. 3, p. 439. doi: 10.1007/s11663-997-0110-7
|
[29] |
K.C. Chou, W.C. Li, F.S. Li, and M.H. He, Formalism of new ternary model expressed in terms of binary regular-solution type parameters, Calphad, 20(1996), No. 4, p. 395. doi: 10.1016/S0364-5916(97)00002-3
|
[30] |
P. Fan and K.C. Chou, A self-consistent model for predicting interaction parameters in multicomponent alloys, Metall. Mater. Trans. A, 30(1999), No. 12, p. 3099. doi: 10.1007/s11661-999-0220-8
|
[31] |
L. Gomidželović, D. Živković, A. Kostov, A. Mitovski, and L. Balanović, Comparative thermodynamic study of Ga–In–Sb system, J. Therm. Anal. Calorim., 103(2011), No. 3, p. 1105. doi: 10.1007/s10973-010-1203-0
|
[32] |
D. Živković, Ž. Živković, and B. Vučinic, Comparative thermodynamic analysis of the Bi–Ga0.1Sb0.9 section in the Bi–Ga–Sb system, J. Therm. Anal. Calorim., 61(2000), No. 1, p. 263. doi: 10.1023/A:1010105901326
|
[33] |
D. Živković, Ž. Živković, L. Stuparević, and S. Rančić, Comparative thermodynamic investigation of the Bi–GaSb system, J. Therm. Anal. Calorim., 65(2001), No. 3, p. 805. doi: 10.1023/A:1011924132358
|
[34] |
B. Trumic, D. Zivkovic, Z. Zivkovic, and D. Manasijevic, Comparative thermodynamic analysis of the Pb–Au0.7Sn0.3 section in the Pb–Au–Sn ternary system, Thermochim. Acta, 435(2005), No. 1, p. 113. doi: 10.1016/j.tca.2005.05.003
|
[35] |
D. Manasijević, D. Živković, and Ž. Živković, Prediction of the thermodynamic properties for the Ga–Sb–Pb ternary system, Calphad, 27(2003), No. 4, p. 361. doi: 10.1016/j.calphad.2003.12.004
|
[36] |
C.K. Behera and A. Sonaye, Measurement of zinc activity in the ternary In–Zn–Sn alloys by EMF method, Thermochim. Acta, 568(2013), p. 196. doi: 10.1016/j.tca.2013.06.039
|
[37] |
L. Balanović, D. Živković, A. Mitovski, D. Manasijević, and Ž. Živković, Calorimetric investigations and thermodynamic calculation of Zn–Al–Ga system, J. Therm. Anal. Calorim., 103(2011), No. 3, p. 1055. doi: 10.1007/s10973-010-1070-8
|
[38] |
L.J. Yan, S.B. Zheng, G.J. Ding, G.T. Xu, and Z.Y. Qiao, Surface tension calculation of the Sn–Ga–In ternary alloy, Calphad, 31(2007), No. 1, p. 112. doi: 10.1016/j.calphad.2006.09.005
|
[39] |
M.M. Piñeiro, E. Mascato, L. Mosteiro, and J.L. Legido, Mixing properties for the ternary mixture methyl tert-butyl ether + 1-butanol + decane at 298.15 K, J. Chem. Eng. Data, 48(2003), No. 4, p. 758. doi: 10.1021/je025579q
|
[40] |
H. Casas, L. Segade, S. Garcı́a-Garabal, M.M. Piñeiro, C. Franjo, E. Jiménez, and M.I. Paz Andrade, Excess molar enthalpies for propyl propanoate + cyclohexane + benzene at 298.15 and 308.15 K, Fluid Phase Equilib., 182(2001), No. 1-2, p. 279. doi: 10.1016/S0378-3812(01)00403-4
|
[41] |
H. Arslan, Analytical determination of partial and integral properties of the six components systems Ni–Cr–Co–Al–Mo–Ti and their subsystems, Phys. B Condens. Matter, 438(2014), p. 48. doi: 10.1016/j.physb.2013.12.046
|
[42] |
H. Arslan, A. Dogan, and T. Dogan, An analytical approach for thermodynamic properties of the six-component systems Ni–Cr–Co–Al–Mo–Ti and their subsystems, Phys. Met. Metallogr., 114(2013), No. 12, p. 1053. doi: 10.1134/S0031918X13220018
|
[43] |
M. Hindler and A. Mikula, Calorimetric investigations of liquid gold–antimony–tin alloys, Int. J. Mater. Res., 103(2012), No. 7, p. 858. doi: 10.3139/146.110694
|
[44] |
S. Knott, Z. Li, and A. Mikula, Integral enthalpy of mixing of the liquid ternary Au–Cu–Sn system, Thermochim. Acta, 470(2008), No. 1-2, p. 12. doi: 10.1016/j.tca.2008.01.014
|
[45] |
A. Mikula and S. Knott, Thermodynamic investigations of ternary liquid alloys, J. Phys.: Condens. Matter, 20(2008), No. 11, art. No. 114109. doi: 10.1088/0953-8984/20/11/114109
|
[46] |
V. Raghavan, Al–Pb–Zn (aluminum–lead–zinc), J. Phase Equilib. Diffus., 29(2008), No. 2, p. 188. doi: 10.1007/s11669-008-9261-8
|
[47] |
L.P. Zhang, X.L. Song, Y.Y. Song, Z.B. Sun, Q. Li, X.P. Song, and L.Q. Wang, A method to estimate the Gibbs free energy of non-equilibrium alloys by thermal analysis, J. Therm. Anal. Calorim., 110(2012), No. 3, p. 1153. doi: 10.1007/s10973-011-2065-9
|
[48] |
D. Živković, T.H. Grgurić, M. Gojić, D. Ćubela, Z.S. Šimišić, A. Kostov, and S. Kožuh, Calculation of thermodynamic properties of Cu–Al–(Ag, Au) shape memory alloy systems, Trans. Indian Inst. Met., 67(2014), No. 2, p. 285. doi: 10.1007/s12666-013-0328-9
|
[49] |
Z.B. Sun, J. Guo, Y. Li, Y.M. Zhu, Q. Li, and X.P. Song, Effects of Ti addition on the liquid-phase separation of Cu71Cr29 alloy during rapid cooling, Metall. Mater. Trans. A, 39(2008), No. 5, p. 1054. doi: 10.1007/s11661-008-9466-9
|
[50] |
J.F. Wan, S.P. Chen, and T.Y. Hsu (Xu Zuyao), The stability of transition phases in Fe–Mn–Si based alloys, Calphad, 25(2001), No. 3, p. 355. doi: 10.1016/S0364-5916(01)00055-4
|
[51] |
X. Ma, Y.Y. Qian, and F. Yoshida, Effect of La on the Sn-rich halo formation in Sn60–Pb40 alloy, J. Alloys Compd., 327(2001), No. 1-2, p. 263. doi: 10.1016/S0925-8388(01)01554-7
|
[52] |
X. Ma, Y.Y. Qian, and F. Yoshida, Effect of La on the Cu–Sn intermetallic compound (IMC) growth and solder joint reliability, J. Alloys Compd., 334(2002), No. 1-2, p. 224. doi: 10.1016/S0925-8388(01)01747-9
|
[53] |
G.H. Zhang, L.J. Wang, and K.C. Chou, A comparison of different geometrical models in calculating physicochemical properties of quaternary systems, Calphad, 34(2010), No. 4, p. 504. doi: 10.1016/j.calphad.2010.10.004
|
[54] |
K.C. Chou, X.M. Zhong, and K.D. Xu, Calculation of physicochemical properties in a ternary system with miscibility gap, Metall. Mater. Trans. B, 35(2004), No. 4, p. 715. doi: 10.1007/s11663-004-0011-y
|
[55] |
D.M. Pérez, Universidade da Coruna [Dissertation], 2006, p. 347.
|
[56] |
V. Kokotin, Technical University Dresden [Dissertation], 2010.
|
[57] |
K.C. Chou and G.H. Zhang, Calculation of physicochemical properties with limited discrete data in multicomponent systems, Metall. Mater. Trans. B, 40(2009), No. 2, p. 223. doi: 10.1007/s11663-009-9229-z
|
[58] |
U. Mehta, S.K. Yadav, I. Koirala, R.P. Koirala, and D. Adhikari, Thermodynamic and surface properties of liquid Ti–Al–Fe alloy at different temperatures, Phys. Chem. Liq., 59(2021), No. 4, p. 585. doi: 10.1080/00319104.2020.1793333
|
[59] |
P. Sahu, S. Samal, and V. Kumar, Microstructural, magnetic, and geometrical thermodynamic investigation of FeCoNi(MnSi)x (0.0, 0.1, 0.25, 0.5, 0.75, 1.0) high entropy alloys, Materialia, 18(2021), art. No. 101133. doi: 10.1016/j.mtla.2021.101133
|
[60] |
S.G. Sarwat and K.R. Ravi, Liquid phase as an indicator of glass-forming ability, Intermetallics, 133(2021), art. No. 107174. doi: 10.1016/j.intermet.2021.107174
|
[61] |
Z. Śniadecki, The influence of 3d and 4d transition metals on the glass forming ability of ternary FeCo-based alloys, Metall. Mater. Trans. A, 52(2021), No. 5, p. 1861. doi: 10.1007/s11661-021-06196-7
|
[62] |
S.K. Yadav, U. Mehta, and D. Adhikari, Optimization of thermodynamic and surface properties of ternary Ti–Al–Si alloy and its sub-binary alloys in molten state, Heliyon, 7(2021), No. 3, art. No. e06511. doi: 10.1016/j.heliyon.2021.e06511
|
[63] |
A. Dogan and H. Arslan, Estimation of viscosity of alloys using Gibbs free energy of mixing and geometric model, Russ. J. Phys. Chem., 95(2021), No. 3, p. 586. doi: 10.1134/S003602442103002X
|
[64] |
H. Arslan, Prediction of excess molar volumes for quaternary liquid mixtures at 298.15 K, Süleyman Demirel Üniversitesi Fen Edebiyat Fakültesi Fen Dergisi, (2021), p. 96.
|
[65] |
V. Shrotri and L. Muhmood, Application of geometric models for calculation of viscosity and density of LiNO3 and CsNO3 based ternary nitrate salt systems, Calphad, 68(2020), art. No. 101749. doi: 10.1016/j.calphad.2020.101749
|
[66] |
Z. Śniadecki, Glass-forming ability of Fe–Ni alloys substituted by group V and VI transition metals (V, Nb, Cr, Mo) studied by thermodynamic modeling, Metall. Mater. Trans. A, 51(2020), No. 9, p. 4777. doi: 10.1007/s11661-020-05897-9
|