Kuibo Yin, Xiufang Bian, Na Han, Xiujun Yao, Yan Zhao, and Jiankun Zhou, Effect of the addition of Al-Ti-C master alloy on the microstructure and microhardness of a cast Al-10Mg alloy, J. Univ. Sci. Technol. Beijing, 13(2006), No. 2, pp. 149-153. https://doi.org/10.1016/S1005-8850(06)60033-9
Cite this article as:
Kuibo Yin, Xiufang Bian, Na Han, Xiujun Yao, Yan Zhao, and Jiankun Zhou, Effect of the addition of Al-Ti-C master alloy on the microstructure and microhardness of a cast Al-10Mg alloy, J. Univ. Sci. Technol. Beijing, 13(2006), No. 2, pp. 149-153. https://doi.org/10.1016/S1005-8850(06)60033-9
Kuibo Yin, Xiufang Bian, Na Han, Xiujun Yao, Yan Zhao, and Jiankun Zhou, Effect of the addition of Al-Ti-C master alloy on the microstructure and microhardness of a cast Al-10Mg alloy, J. Univ. Sci. Technol. Beijing, 13(2006), No. 2, pp. 149-153. https://doi.org/10.1016/S1005-8850(06)60033-9
Citation:
Kuibo Yin, Xiufang Bian, Na Han, Xiujun Yao, Yan Zhao, and Jiankun Zhou, Effect of the addition of Al-Ti-C master alloy on the microstructure and microhardness of a cast Al-10Mg alloy, J. Univ. Sci. Technol. Beijing, 13(2006), No. 2, pp. 149-153. https://doi.org/10.1016/S1005-8850(06)60033-9
The microstructure and microhardness of a cast Al-10wt%Mg (henceforth Al-10Mg) alloy with 0.2wt% addition of Al-5Ti-0.25C master alloy were compared with those of a refiner-free alloy of similar chemical composition. It was found that this level of the master alloy addition not only caused an effective grain refinement, but also caused a significant increase in the microhardness of the Al-10Mg alloy. Microchemical analysis revealed that TiC particles existed in the grain center. The relationship between the holding time and grain size was also studied. It shows that the grain refining efficiency is faded observably with the holding time. This is explained in terms of the instability of TiC particles.
The microstructure and microhardness of a cast Al-10wt%Mg (henceforth Al-10Mg) alloy with 0.2wt% addition of Al-5Ti-0.25C master alloy were compared with those of a refiner-free alloy of similar chemical composition. It was found that this level of the master alloy addition not only caused an effective grain refinement, but also caused a significant increase in the microhardness of the Al-10Mg alloy. Microchemical analysis revealed that TiC particles existed in the grain center. The relationship between the holding time and grain size was also studied. It shows that the grain refining efficiency is faded observably with the holding time. This is explained in terms of the instability of TiC particles.
下载: