Lifang Cai, Yongzhong Zhang, Likai Shi, Haoqiang Yang, and Mingzhe Xi, Research on development of in situ titanium matrix composites and in situ reaction thermodynamics of the reaction systems, J. Univ. Sci. Technol. Beijing, 13(2006), No. 6, pp. 551-557. https://doi.org/10.1016/S1005-8850(06)60112-6
Cite this article as:
Lifang Cai, Yongzhong Zhang, Likai Shi, Haoqiang Yang, and Mingzhe Xi, Research on development of in situ titanium matrix composites and in situ reaction thermodynamics of the reaction systems, J. Univ. Sci. Technol. Beijing, 13(2006), No. 6, pp. 551-557. https://doi.org/10.1016/S1005-8850(06)60112-6
Lifang Cai, Yongzhong Zhang, Likai Shi, Haoqiang Yang, and Mingzhe Xi, Research on development of in situ titanium matrix composites and in situ reaction thermodynamics of the reaction systems, J. Univ. Sci. Technol. Beijing, 13(2006), No. 6, pp. 551-557. https://doi.org/10.1016/S1005-8850(06)60112-6
Citation:
Lifang Cai, Yongzhong Zhang, Likai Shi, Haoqiang Yang, and Mingzhe Xi, Research on development of in situ titanium matrix composites and in situ reaction thermodynamics of the reaction systems, J. Univ. Sci. Technol. Beijing, 13(2006), No. 6, pp. 551-557. https://doi.org/10.1016/S1005-8850(06)60112-6
The in situ synthesis method for titanium matrix composites (TMCs) has obvious technical and economical advantages over other traditional methods. Ultrafine reinforcement particles were formed in situ by chemical reaction between elements or between elements and compounds. Using the approach, contamination at the composite matrix/reinforcement particle interface did not occur,interface bonding was good, and the reinforcement particle was the rmodynamically stable. The stage of development of the preparation process for in situ TMCs as well as the thermodynamic analysis of the possible in situ reaction systems was described.
The in situ synthesis method for titanium matrix composites (TMCs) has obvious technical and economical advantages over other traditional methods. Ultrafine reinforcement particles were formed in situ by chemical reaction between elements or between elements and compounds. Using the approach, contamination at the composite matrix/reinforcement particle interface did not occur,interface bonding was good, and the reinforcement particle was the rmodynamically stable. The stage of development of the preparation process for in situ TMCs as well as the thermodynamic analysis of the possible in situ reaction systems was described.
下载: