Li Xiao, Fushun Liu, and Huibin Xu, Phase transformation behaviors and shape memory effects of TiNiFeAl shape memory alloys, J. Univ. Sci. Technol. Beijing, 14(2007), No. 3, pp. 256-260. https://doi.org/10.1016/S1005-8850(07)60049-8
Cite this article as:
Li Xiao, Fushun Liu, and Huibin Xu, Phase transformation behaviors and shape memory effects of TiNiFeAl shape memory alloys, J. Univ. Sci. Technol. Beijing, 14(2007), No. 3, pp. 256-260. https://doi.org/10.1016/S1005-8850(07)60049-8
Li Xiao, Fushun Liu, and Huibin Xu, Phase transformation behaviors and shape memory effects of TiNiFeAl shape memory alloys, J. Univ. Sci. Technol. Beijing, 14(2007), No. 3, pp. 256-260. https://doi.org/10.1016/S1005-8850(07)60049-8
Citation:
Li Xiao, Fushun Liu, and Huibin Xu, Phase transformation behaviors and shape memory effects of TiNiFeAl shape memory alloys, J. Univ. Sci. Technol. Beijing, 14(2007), No. 3, pp. 256-260. https://doi.org/10.1016/S1005-8850(07)60049-8
Measurements of electrical resistivity, X-ray diffraction, and tensile test at room temperature and -196℃ were performed to investigate the effects of Al addition substituting Ni on the phase transformation behaviors, the mechanical properties, and the shape memory effects of Ti50Ni47Fe2Al1 and Ti50Ni46.5Fe2.5Al1 alloys. It is found that 1at% Al addition dramatically decreases the martensitic start transformation temperature and expands the transformation temperature range of R-phase for TiNiFeAl alloys. The results of tensile test indicate that 1at% Al improves the yield strength of Ti50Ni47Fe2Al1 and Ti50Ni46.5Fe2.5Al1 alloys by 40% and 64%, but decreases the plasticity to 11% and 12% from 26% and 27% respectively. Moreover, excellent shape memory effect of 6.6% and 7.5% were found in Ti50Ni47Fe2Al1 and Ti50Ni46.5Fe2.5Al1 alloys, which results from the stress-induced martensite transformation from the R-phase.
Measurements of electrical resistivity, X-ray diffraction, and tensile test at room temperature and -196℃ were performed to investigate the effects of Al addition substituting Ni on the phase transformation behaviors, the mechanical properties, and the shape memory effects of Ti50Ni47Fe2Al1 and Ti50Ni46.5Fe2.5Al1 alloys. It is found that 1at% Al addition dramatically decreases the martensitic start transformation temperature and expands the transformation temperature range of R-phase for TiNiFeAl alloys. The results of tensile test indicate that 1at% Al improves the yield strength of Ti50Ni47Fe2Al1 and Ti50Ni46.5Fe2.5Al1 alloys by 40% and 64%, but decreases the plasticity to 11% and 12% from 26% and 27% respectively. Moreover, excellent shape memory effect of 6.6% and 7.5% were found in Ti50Ni47Fe2Al1 and Ti50Ni46.5Fe2.5Al1 alloys, which results from the stress-induced martensite transformation from the R-phase.