Renzhong Wang, Quan Yang, Anrui He, Jian Shao, and Haitao Bian, Strip shape control capability of hot wide strip rolling mills, J. Univ. Sci. Technol. Beijing, 15(2008), No. 1, pp. 91-95. https://doi.org/10.1016/S1005-8850(08)60018-3
Cite this article as:
Renzhong Wang, Quan Yang, Anrui He, Jian Shao, and Haitao Bian, Strip shape control capability of hot wide strip rolling mills, J. Univ. Sci. Technol. Beijing, 15(2008), No. 1, pp. 91-95. https://doi.org/10.1016/S1005-8850(08)60018-3
Renzhong Wang, Quan Yang, Anrui He, Jian Shao, and Haitao Bian, Strip shape control capability of hot wide strip rolling mills, J. Univ. Sci. Technol. Beijing, 15(2008), No. 1, pp. 91-95. https://doi.org/10.1016/S1005-8850(08)60018-3
Citation:
Renzhong Wang, Quan Yang, Anrui He, Jian Shao, and Haitao Bian, Strip shape control capability of hot wide strip rolling mills, J. Univ. Sci. Technol. Beijing, 15(2008), No. 1, pp. 91-95. https://doi.org/10.1016/S1005-8850(08)60018-3
The elasticity deformation of rolls was analyzed by means of two-dimensional finite element method (FEM) with variable thickness. Three typical mills were used as objects for analysis. A thorough study was done on the control capabilities of these mills on the strip shape. Then the strip shape control capabilities of the three mills was compared synthetically.
The elasticity deformation of rolls was analyzed by means of two-dimensional finite element method (FEM) with variable thickness. Three typical mills were used as objects for analysis. A thorough study was done on the control capabilities of these mills on the strip shape. Then the strip shape control capabilities of the three mills was compared synthetically.
下载: