Processes of depositing platinum on carbon nanotubes and their effect on performance of proton exchange membrane fuel cell

Yanhui Li; Jun Ding; Junfeng Chen; Zongqiang Mao; Cailu Xu; Dehai Wu

Volume 11 Issue 4

Aug. 2004

计量

文章访问数: 305
HTML全文浏览量: 78
PDF下载量: 10
被引次数: 0

文章导航 > 矿物冶金与材料学报（英文版） > 2004 > 11(4) : 349-353.

Cite this article as:

Yanhui Li, Jun Ding, Junfeng Chen, Zongqiang Mao, Cailu Xu, and Dehai Wu, Processes of depositing platinum on carbon nanotubes and their effect on performance of proton exchange membrane fuel cell, J. Univ. Sci. Technol. Beijing , 11(2004), No. 4, pp.349-353.

引用本文 PDF XML SpringerLink

Materials

Processes of depositing platinum on carbon nanotubes and their effect on performance of proton exchange membrane fuel cell

Yanhui Li^1), ,,
Jun Ding¹⁾,
Junfeng Chen¹⁾,
Zongqiang Mao²⁾,
Cailu Xu¹⁾,
Dehai Wu¹⁾

Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China
Institute of Nuclear Energy Technology, Tsinghua University, Beijing 100084, China

基金项目:

This work was financially supported by the State Key Project for Fundamental Research of the Ministry of Science and Technology (No. G20000264-04).

通信作者:
Yanhui Li E-mail: liyanhui@tsinghua.org.cn

计量
- 文章访问数: 305
- HTML全文浏览量: 78
- PDF下载量: 10

中文摘要

The ultrafine platinum nanoparticles deposited on the surfaces of carbon nanotubes (Pt/CNTs) were prepared by a chemical precipitation method and used as the catalyst of proton exchange membrane fuel cell. The depositing process parameters such as the solution pH value, Pt content and treatment temperature were analyzed. The experimental results show that the optimum process parameters to prepare Pt/CNTs are the solution pH value of 7.0, the theoretical Pt content of 25% (mass fraction) and the heating temperature of 500℃, under the conditions the best performance of the proton exchange membrane fuel cell can be obtained and its voltage can reach 580 mV at a current density of 500 mA/cm².

关键词:

Materials

Processes of depositing platinum on carbon nanotubes and their effect on performance of proton exchange membrane fuel cell

Yanhui Li^1), ,,
Jun Ding¹⁾,
Junfeng Chen¹⁾,
Zongqiang Mao²⁾,
Cailu Xu¹⁾,
Dehai Wu¹⁾

Author Affilications

Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China
Institute of Nuclear Energy Technology, Tsinghua University, Beijing 100084, China

Funds:
This work was financially supported by the State Key Project for Fundamental Research of the Ministry of Science and Technology (No. G20000264-04).
Received: 07 September 2003;

Abstract:

Keywords:

HTML全文

资源附件(0)

施引文献

分享

计量

目录

Cite this article as:

Processes of depositing platinum on carbon nanotubes and their effect on performance of proton exchange membrane fuel cell

通信作者:
Yanhui Li E-mail: liyanhui@tsinghua.org.cn

计量

中文摘要

Processes of depositing platinum on carbon nanotubes and their effect on performance of proton exchange membrane fuel cell

Abstract:

分享

计量

目录

Cite this article as:

Processes of depositing platinum on carbon nanotubes and their effect on performance of proton exchange membrane fuel cell

通信作者: Yanhui Li E-mail: liyanhui@tsinghua.org.cn

计量

中文摘要

Processes of depositing platinum on carbon nanotubes and their effect on performance of proton exchange membrane fuel cell

Abstract:

通信作者:
Yanhui Li E-mail: liyanhui@tsinghua.org.cn