Cite this article as:

Wei Tian, and Raymond T. Whodhams, Effect of Cooling Rate on Morphology and Oxygen Permeability of Polypropylene, J. Univ. Sci. Technol. Beijing , 6(1999), No. 3, pp.219-223.
Wei Tian, and Raymond T. Whodhams, Effect of Cooling Rate on Morphology and Oxygen Permeability of Polypropylene, J. Univ. Sci. Technol. Beijing , 6(1999), No. 3, pp.219-223.
引用本文 PDF XML SpringerLink

Effect of Cooling Rate on Morphology and Oxygen Permeability of Polypropylene

摘要: The influence of different cooling rates on the morphology and oxygen permeability of polypropylene containing ferrocene has been investigated. The spherulitic crystalline size and structure, which can affect the oxygen permeability are dependent upon the heating temperature, annealing time and cooling rate. The modulus of the composite was measured by dynamic mechanical analysis.

 

Effect of Cooling Rate on Morphology and Oxygen Permeability of Polypropylene

Abstract: The influence of different cooling rates on the morphology and oxygen permeability of polypropylene containing ferrocene has been investigated. The spherulitic crystalline size and structure, which can affect the oxygen permeability are dependent upon the heating temperature, annealing time and cooling rate. The modulus of the composite was measured by dynamic mechanical analysis.

 

/

返回文章
返回