Cite this article as:

WU Ji-xun, LIU Yong-qin, LU Yan-ping, and MENG Hui-min, Zn-Ni Alloy Plating in Ammonium Chloride System, J. Univ. Sci. Technol. Beijing , 1(1994), No. 1-2, pp.83-89.
WU Ji-xun, LIU Yong-qin, LU Yan-ping, and MENG Hui-min, Zn-Ni Alloy Plating in Ammonium Chloride System, J. Univ. Sci. Technol. Beijing , 1(1994), No. 1-2, pp.83-89.
引用本文 PDF XML SpringerLink

氯化铵体系Zn-Ni合金电镀

摘要: 研究了镀液成分和工艺参数对镀层Ni含量的影响,探讨了Zn-Ni合金共沉积机理,获得了耐蚀性为同等镀锌层6倍以上的光亮Zn-Ni(13%)合金电镀的配方和工艺条件.

 

Zn-Ni Alloy Plating in Ammonium Chloride System

Abstract: The influences of electroplating bath composition and technological parameters on Ni content in deposit have been investigated. The mechanism of Zn-Ni alloy codeposition has been discussed. The plating bath composition and technological conditions for bright Zn-Ni alloy coating containing 13% Ni with 6 times corrosion resistance compared with that of Zn coating have been determined.

 

/

返回文章
返回