Cite this article as:

Pengchao Kang, Zhongda Yin, Yue Jiang, and Mingwei Li, Formation mechanism of Ti5Si3 powder by mechanical alloying, J. Univ. Sci. Technol. Beijing , 11(2004), No. 2, pp.187-189.
Pengchao Kang, Zhongda Yin, Yue Jiang, and Mingwei Li, Formation mechanism of Ti5Si3 powder by mechanical alloying, J. Univ. Sci. Technol. Beijing , 11(2004), No. 2, pp.187-189.
shu
引用本文 PDF XML SpringerLink

Formation mechanism of Ti5Si3 powder by mechanical alloying

摘要: The formation mechanism of stoichiometry Ti5Si3 by mechanical alloying (MA) from elemental powders has been investigated. The results of XRD and SEM analyses of the powder show that Ti5Si3 can be synthesized by MA in a planetary mill with two different formation mechanisms. Ti5Si3 was formed gradually with the mechanical collusion reaction (MCR) mechanism under a lower impact energy, and the Ti5Si3 was formed abruptly with the self-propagating high-temperature synthesis (SHS) formation mechanism under a higher impact energy.

 

Formation mechanism of Ti5Si3 powder by mechanical alloying

Abstract: The formation mechanism of stoichiometry Ti5Si3 by mechanical alloying (MA) from elemental powders has been investigated. The results of XRD and SEM analyses of the powder show that Ti5Si3 can be synthesized by MA in a planetary mill with two different formation mechanisms. Ti5Si3 was formed gradually with the mechanical collusion reaction (MCR) mechanism under a lower impact energy, and the Ti5Si3 was formed abruptly with the self-propagating high-temperature synthesis (SHS) formation mechanism under a higher impact energy.

 

    HTML全文
    • 资源附件(0)
    • 相关文章
    施引文献

/

返回文章
返回