XPS study of the corrosion resisting composite alloying layer obtained by double glow plasma with the brush plating Ni interlayer

Jiang Xu, Xishan Xie, Zhong Xu, Wenjin Liu

分享

计量
  • 文章访问数:  230
  • HTML全文浏览量:  73
  • PDF下载量:  7
  • 被引次数: 0

目录

    Cite this article as:

    Jiang Xu, Xishan Xie, Zhong Xu, and Wenjin Liu, XPS study of the corrosion resisting composite alloying layer obtained by double glow plasma with the brush plating Ni interlayer, J. Univ. Sci. Technol. Beijing , 11(2004), No. 2, pp.151-156.
    Jiang Xu, Xishan Xie, Zhong Xu, and Wenjin Liu, XPS study of the corrosion resisting composite alloying layer obtained by double glow plasma with the brush plating Ni interlayer, J. Univ. Sci. Technol. Beijing , 11(2004), No. 2, pp.151-156.
    引用本文 PDF XML SpringerLink
    Materials

    XPS study of the corrosion resisting composite alloying layer obtained by double glow plasma with the brush plating Ni interlayer

      通信作者:

      Jiang Xu E-mail: xujiang73@sina.com.cn

    The Ni-Cr-Mo-Cu multi-element surface alloying with the electric brush plating Ni interlayer on the low carbon steel substrate has been investigated. By the electrochemical method in 3.5% (mass fraction) NaCl solution, the corrosion resistance of the composite alloying layer and single alloying layer is determined. The experimental results show that the corrosion resistance of the composite alloying layer is obviously better than that of the single alloying layer. The structure and composition of passive films formed on the two kinds of alloyed layers after electrochemical tests in 3.5% NaCl solution have been studied using X-ray photoelectron spectroscopy (XPS). It is concluded that the double glow plasma surface alloying of low carbon steel with the electric brush plating Ni interlayer is an appropriate technique to enhance the corrosion resistance compared with the single double glow surface alloying.

     

    Materials

    XPS study of the corrosion resisting composite alloying layer obtained by double glow plasma with the brush plating Ni interlayer

    Author Affilications
    • Received: 15 April 2003;
    The Ni-Cr-Mo-Cu multi-element surface alloying with the electric brush plating Ni interlayer on the low carbon steel substrate has been investigated. By the electrochemical method in 3.5% (mass fraction) NaCl solution, the corrosion resistance of the composite alloying layer and single alloying layer is determined. The experimental results show that the corrosion resistance of the composite alloying layer is obviously better than that of the single alloying layer. The structure and composition of passive films formed on the two kinds of alloyed layers after electrochemical tests in 3.5% NaCl solution have been studied using X-ray photoelectron spectroscopy (XPS). It is concluded that the double glow plasma surface alloying of low carbon steel with the electric brush plating Ni interlayer is an appropriate technique to enhance the corrosion resistance compared with the single double glow surface alloying.

     

    Relative Articles

    Gang Yang, Yi Yang, Dong Lu, Kun-lan Huang, Jun Wang. Effect of heating rate on the densification of NdFeB alloys sintered by an electric field [J]. 矿物冶金与材料学报(英文版). DOI: 10.1007/s12613-012-0664-5

    View details

    Ying-hu Dong, Xin-bo He, Rafi Ud-din, Cai-yu Guo, Liang Xu, Yu-ting Huang, Xuan-hui Qu. Fabrication and thermal stability of Ni-P coated diamond powder using electroless plating [J]. 矿物冶金与材料学报(英文版). DOI: 10.1007/s12613-011-0466-1

    View details

    Dongming Guo, Min Zhang, Zhuji Jin, Renke Kang. Effect of direct current and pulse plating on the EDM performance of copper-zirconium diboride composites [J]. 矿物冶金与材料学报(英文版). DOI: 10.1016/S1005-8850(07)60091-7

    View details

    Dequan Peng, Xinde Bai, Baoshan Chen. Effect of copper ions implantation on the corrosion behavior of ZIRLO alloy in 1 mol/L H2SO4 [J]. 矿物冶金与材料学报(英文版). DOI: 10.1016/S1005-8850(06)60035-2

    View details

    Int. J. Miner. Metall. Mater., 2006, 13(2): 125-130.

    PDF View details

    Jun Zhang, Li Li, Lipeng Zhang, Shilu Zhao, Qiang Guo. Composition demixing effect on cathodic arc ion plating [J]. 矿物冶金与材料学报(英文版). DOI: 10.1016/S1005-8850(06)60028-5

    View details

    Jingang Qi, Jianzhong Wang, Xingjiang Liu, Bing Wang, Daqiang Cang. Casting structure of pure aluminum by electric pulse modification at different superheated temperatures [J]. 矿物冶金与材料学报(英文版).

    View details

    Zhanhua Wang, Zhuoshen Shen, Daobin Mu. Effects of gold plating on the resistance to high temperature discoloration of the cavity for ceramic packages [J]. 矿物冶金与材料学报(英文版).

    View details

    Int. J. Miner. Metall. Mater., 2001, 8(3): 210-213.

    PDF View details

    Guanghua Yu, Hongchen Zhao, Jiao Teng, Chunlin Chai, Fengwu Zhu, Yang Xia, Shumin Chai. XPS Studies of Magnetic Multilayers [J]. 矿物冶金与材料学报(英文版).

    View details

    Int. J. Miner. Metall. Mater., 1999, 6(4): 306-308.

    PDF View details

    Daze Lin. A New Safety Electric Initiating System [J]. 矿物冶金与材料学报(英文版).

    View details

    Int. J. Miner. Metall. Mater., 1999, 6(3): 199-200,204.

    PDF View details

    Mei Zhang, Zhenxiang Liu, Kan Xie, Xueyan Du, Wenchao Li. XPS Study of CeO2/Al2O3 film [J]. 矿物冶金与材料学报(英文版).

    View details

    /

    返回文章
    返回