Cite this article as:


Erratum to: Effect of the synthesis route on the structural and dielectric properties of SrBi1.8Y0.2Nb2O9 ceramics

+ Author Affiliations
  • Corresponding author:

    Mohamed Afqir    E-mail:

  • Available online: 15 September 2020
  • 加载中

  • [1] Shu-mei Chen,Chun-fa Liao,Jue-yuan Lin,Bo-qing Cai,Xu Wang, and Yun-fen Jiao, Erratum to: Electrical conductivity of molten LiF–DyF3–Dy2O3–Cu2O system for Dy–Cu intermediate alloy production, Int. J. Miner. Metall. Mater.,
    [2] Peng-fei Wang,Ming Liang,Xiao-yan Xu,Jian-qing Feng,Cheng-shan Li,Ping-xiang Zhang, and Jin-shan Li, Effect of groove rolling on the microstructure and properties of Cu–Nb microcomposite wires, Int. J. Miner. Metall. Mater.,
    [3] Jie Luo,Xin Li,Fu-jie Zhang,Song Chen, and Ding Ren, 

    Sintering of monoclinic-SrAl2Si2Oceramics and their immobilization of Sr

    Int. J. Miner. Metall. Mater.,
    [4] Peng Liu,Li-bo Zhang,Bing-guo Liu,Guang-jun He,Jin-hui Peng, and Meng-yang Huang, Determination of dielectric properties of titanium carbide fabricated by microwave synthesis with Ti-bearing blast furnace slag, Int. J. Miner. Metall. Mater.,
    [5] Seyed Rahim Kiahosseini and Hossein Ahmadian, Effect of residual structural strain caused by the addition of Co3O4 nanoparticles on the structural, hardness and magnetic properties of an Al/Co3O4 nanocomposite produced by powder metallurgy, Int. J. Miner. Metall. Mater.,
    [6] Thongsuk Sichumsaeng,Nutthakritta Phromviyo,Supree Pinitsoontorn,Pinit Kidkhunthod,Narong Chanlek, and Santi Maensiri, Synthesis, characterization and magnetic properties of KFeO2 nanoparticles prepared by a simple egg-white solution route, Int. J. Miner. Metall. Mater.,
    [7] Jashandeep Singh and Ashok Kumar, Investigation of structural, morphological and electrochemical properties of mesoporous La2CuCoO6 rods fabricated by facile hydrothermal route, Int. J. Miner. Metall. Mater.,
    [8] K. Chandrakanta,Rasmita Jena,Pikesh Pal,Md. Faruck Abdullah,Somdatta D. Kaushik, and Anil K. Singh, Effect of Co substitution on the structural, dielectric and optical properties of KBiFe2O5Int. J. Miner. Metall. Mater.,
    [9] Omer Yunus Gumus and  Halil Ibrahim Unal, Effect of surfactant on the dielectric and electrorheological properties of zinc borate/silicone oil dispersions, Int. J. Miner. Metall. Mater.,
    [10] You Zhou, Yu-he Zhang, Jun-sheng Ma, Ming-peng Yu, and  Hong Qiu, Structural and electrical properties of HCl-polyaniline-Ag composites synthesized by polymerization using Ag-coated (NH4)2S2O8 powder, Int. J. Miner. Metall. Mater.,
    [11] Yu Li, Li-hua Zhao, Ya-kun Wang, and  Da-qiang Cang, Effects of Fe2O3 on the properties of ceramics from steel slag, Int. J. Miner. Metall. Mater.,
    [12] Saeid Mersagh Dezfuli, Ali Shanaghi, and  Saeid Baghshahi, Effect of Al2O3 and Y2O3 on the corrosion behavior of ZrO2-benzotriazole nanostructured coatings applied on AA2024 via a sol-gel method, Int. J. Miner. Metall. Mater.,
    [13] Anna Nocivin, Ion Cinca, Doina Raducanu, Vasile Danut Cojocaru, and  Ion Alexandru Popovici, Mechanical properties of a Gum-type Ti-Nb-Zr-Fe-O alloy, Int. J. Miner. Metall. Mater.,
    [14] Zhi-yong Xue, Yue-juan Ren, Wen-bo Luo, Yu Ren, Ping Xu, and  Chao Xu, Microstructure evolution and mechanical properties of a large-sized ingot of Mg-9Gd-3Y-1.5Zn-0.5Zr (wt%) alloy after a lower-temperature homogenization treatment, Int. J. Miner. Metall. Mater.,
    [15] Kai-lin Cheng, Dao-bin Mu, Bo-rong Wu, Lei Wang, Ying Jiang, and  Rui Wang, Electrochemical performance of a nickel-rich LiNi0.6Co0.2Mn0.2O2 cathode material for lithium-ion batteries under different cut-off voltages, Int. J. Miner. Metall. Mater.,
    [16] Jian-bin Zhu and  Hong Yan, Microstructure and properties of mullite-based porous ceramics produced from coal fly ash with added Al2O3Int. J. Miner. Metall. Mater.,
    [17] Hong-pan Liu, Xiao-feng Huang, Li-ping Ma, Dan-li Chen, Zhi-biao Shang, and  Ming Jiang, Effect of Fe2O3 on the crystallization behavior of glass-ceramics produced from naturally cooled yellow phosphorus furnace slag, Int. J. Miner. Metall. Mater.,
    [18] Peng Jiang, Guo-xiang Yin, Ming-wei Yan, Jia-lin Sun, Bin Li, and  Yong Li, A new synthetic route to MgO-MgAl2O4-ZrO2 highly dispersed composite material through formation of Mg5Al2.4Zr1.7O12 metastable phase:synthesis and physical properties, Int. J. Miner. Metall. Mater.,
    [19] Zuo-li Li, Jun Zhao, Jia-lin Sun, Feng Gong, and  Xiu-ying Ni, Reinforcing effect of graphene on the mechanical properties of Al2O3/TiC ceramics, Int. J. Miner. Metall. Mater.,
    [20] Rajinder Kumar, Dipti Rawat, P. B. Barman, and  Ragini Raj Singh, Experimental and theoretical verification of cations distribution and spin canting effect via structural and magnetic studies of Ni0.6-xZn0.4CoxFe2O4 nanoparticles, Int. J. Miner. Metall. Mater.,
  • 加载中
通讯作者: 陈斌,
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索


Share Article

Article Metrics

Article views(287) PDF downloads(4) Cited by()

Proportional views

Erratum to: Effect of the synthesis route on the structural and dielectric properties of SrBi1.8Y0.2Nb2O9 ceramics

  • Corresponding author:

    Mohamed Afqir    E-mail:

  • 1. Laboratoire des Sciences des Matériaux Inorganiques et leurs Applications, Faculté des Sciences Semlalia, Université Cadi Ayyad, Marrakech, 40000, Maroc
  • 2. Unité de Dynamique et Structure des Matériaux Moléculaires, Université du Littoral-Côte d’Opale, Calais, 62100, France
  • 3. Laboratoire de recherche sur la réactivité des matériaux et l’optimisation des procédés, Faculté des Sciences Semlalia, Université Cadi Ayyad, Marrakech, 40000, Maroc


  • Volume 25, Number 11, November 2018, Page 1304

    The original version of this article unfortunately contained a mistake. In the Table 1, the values of volume are not correct. The volume should be V = a × b × c. Thus, the correct values are given below:

    Samples 2θ / (°) β / (°) Crystallite size, DD–S / nm Lattice parameters / nm V / nm3 Bulk density / %
    a b c
    SS-SBYN 29.0216 0.0389 675 0.5523 0.535 2.5713 0.7597 87
    C-SBYN 29.0396 0.2571 90 0.5494 0.545 2.5010 0.7488 82
    H-SBYN 29.2484 0.2201 32 0.5497 0.544 2.5123 0.7512 81

    Table 1.  Characteristic structural parameters of the three processes



    DownLoad:  Full-Size Img  PowerPoint