Most Cited

Research Article
Fabrication of homogeneously dispersed graphene/Al composites by solution mixing and powder metallurgy
Xiang Zeng, Jie Teng, Jin-gang Yu, Ao-shuang Tan, Ding-fa Fu, and  Hui Zhang
2018, vol. 25, no. 1, pp. 102-109.
Research Article
Gas-based reduction of vanadium titano-magnetite concentrate:behavior and mechanisms
Yu-lei Sui, Yu-feng Guo, Tao Jiang, Xiao-lin Xie, Shuai Wang, and  Fu-qiang Zheng
2017, vol. 24, no. 1, pp. 10-17.
Research Article
Thin-layer heap bioleaching of copper flotation tailings containing high levels of fine grains and microbial community succession analysis
Xiao-dong Hao, Yi-li Liang, Hua-qun Yin, Hong-wei Liu, Wei-min Zeng, and  Xue-duan Liu
2017, vol. 24, no. 4, pp. 360-368.
Research Article
Influence of mill scale and rust layer on the corrosion resistance of low-alloy steel in simulated concrete pore solution
Jin-jie Shi and  Jing Ming
2017, vol. 24, no. 1, pp. 64-74.
Research Article
Microstructure and mechanical properties of Al/Cu/Mg laminated composite sheets produced by the ARB proces
Davood Rahmatabadi, Moslem Tayyebi, Ramin Hashemi, and  Ghader Faraji
2018, vol. 25, no. 5, pp. 564-572.
Research Article
Roasting and leaching behaviors of vanadium and chromium in calcification roasting–acid leaching of high-chromium vanadium slag
Jing Wen, Tao Jiang, Mi Zhou, Hui-yang Gao, Jia-yi Liu, and  Xiang-xin Xue
2018, vol. 25, no. 5, pp. 515-526.
Research Article
Effect of main inclusions on crack initiation in bearing steel in the very high cycle fatigue regime
Chao Gu, Yan-ping Bao, Peng Gan, Min Wang, and  Jin-shan He
2018, vol. 25, no. 6, pp. 623-629.
Research Article
Effect of TiO2 on the viscosity and structure of low-fluoride slag used for electroslag remelting of Ti-containing steels
Cheng-bin Shi, Ding-li Zheng, Seung-ho Shin, Jing Li, and  Jung-wook Cho
2017, vol. 24, no. 1, pp. 18-24.
Research Article
Effects of heat treatment on the intermetallic compounds and mechanical properties of the stainless steel 321-aluminum 1230 explosive-welding interface
Mohammadreza Khanzadeh Gharah Shiran, Gholamreza Khalaj, Hesam Pouraliakbar, Mohamma dreza Jandaghi, Hamid Bakhtiari, and  Masoud Shirazi
2017, vol. 24, no. 11, pp. 1267-1277.
Research Article
Reduction in secondary dendrite arm spacing in cast eutectic Al-Si piston alloys by cerium addition
R. Ahmad, M. B. A. Asmael, N. R. Shahizan, and  S. Gandouz
2017, vol. 24, no. 1, pp. 91-101.
Research Article
Electrochemical performance of a nickel-rich LiNi0.6Co0.2Mn0.2O2 cathode material for lithium-ion batteries under different cut-off voltages
Kai-lin Cheng, Dao-bin Mu, Bo-rong Wu, Lei Wang, Ying Jiang, and  Rui Wang
2017, vol. 24, no. 3, pp. 342-351.
Research Article
Solution chemistry of carbonate minerals and its effects on the flotation of hematite with sodium oleate
Dong Li, Wan-zhong Yin, Ji-wei Xue, Jin Yao, Ya-feng Fu, and  Qi Liu
2017, vol. 24, no. 7, pp. 736-744.
Research Article
Microstructure and mechanical properties of SiC-particle-strengthening tri-metal Al/Cu/Ni composite produced by accumulative roll bonding process
Moslem Tayyebi and  Beitallah Eghbali
2018, vol. 25, no. 3, pp. 357-364.
Research Article
Mechanical properties and supporting effect of CRLD bolts under static pull test conditions
Xiao-ming Sun, Yong Zhang, Dong Wang, Jun Yang, Hui-chen Xu, and  Man-chao He
2017, vol. 24, no. 1, pp. 1-9.
Research ArticleOpen Access
Effects of chitosan inhibitor on the electrochemical corrosion behavior of 2205 duplex stainless steel
Se-fei Yang, Ying Wen, Pan Yi, Kui Xiao, and  Chao-fang Dong
2017, vol. 24, no. 11, pp. 1260-1266.
Research Article
Effect of sintering temperature on the microstructure and properties of foamed glass-ceramics prepared from high-titanium blast furnace slag and waste glass
Chang-hong Chen, Ke-qin Feng, Yu Zhou, and  Hong-ling Zhou
2017, vol. 24, no. 8, pp. 931-936.
Research Article
Effects of the deep rolling process on the surface roughness and properties of an Al-3vol%SiC nanoparticle nanocomposite fabricated by mechanical milling and hot extrusion
Sajjad Sattari and  Amir Atrian
2017, vol. 24, no. 7, pp. 814-825.
Research Article
Microstructure and mechanical properties of friction-stir welded St52 steel joints
Tevfik Küçükömeroğlu, Semih M. Aktarer, Güven İpekoğlu, and  Gürel Çam
2018, vol. 25, no. 12, pp. 1457-1464.
Research Article
Improvement in the mechanical properties of Al/SiC nanocomposites fabricated by severe plastic deformation and friction stir processing
M. Sarkari Khorrami, M. Kazeminezhad, Y. Miyashita, and  A. H. Kokabi
2017, vol. 24, no. 3, pp. 297-308.
Research Article
Microstructure and properties of mullite-based porous ceramics produced from coal fly ash with added Al2O3
Jian-bin Zhu and  Hong Yan
2017, vol. 24, no. 3, pp. 309-315.
  • First
  • Prev
  • 1
  • 2
  • 3
  • 4
  • 5
  • Last
  • Total:18
  • To
  • Go