International Journal of Minerals, Metallurgy and Materials 2007 Vol. 14 No. 1

GIS-based 3D limit equilibrium analysis for design optimization of a 600 m high slope in an open pit mine

Meifeng Cai, Mowen Xie, Chunlei Li

2007,vol. 14,no.1pp. 1-5. https://doi.org/10.1016/S1005-8850(07)60001-2

[PDF] SpringerLink

Application of a microseismic monitoring system in deep mining

Chengxiang Yang, Zhouquan Luo, Guobin Hu, Xiaoming Liu

2007,vol. 14,no.1pp. 6-8. https://doi.org/10.1016/S1005-8850(07)60002-4

[PDF] SpringerLink

A new synthetic chelating collector for the flotation of oxidized-lead mineral

Yongkai Zhu, Chuanyao Sun, Weiguo Wu

2007,vol. 14,no.1pp. 9-13. https://doi.org/10.1016/S1005-8850(07)60003-6

[PDF] SpringerLink

Thermodynamic calculations and experiments on inclusions to be nucleation sites for intragranular ferrite in Si-Mn-Ti deoxidized steel

Xiaojun Zhuo, Xinhua Wang, Wanjun Wang, Lee Hae-Geon

2007,vol. 14,no.1pp. 14-21. https://doi.org/10.1016/S1005-8850(07)60004-8

[PDF] SpringerLink

Mathematical modeling of fluid flow, heat transfer and inclusion transport in a four strand tundish

Yufeng Wang, Guanghua Wen, Ping Tang, Mingmei Zhu, Yuanqing Chen, Weizhao Song

2007,vol. 14,no.1pp. 22-26. https://doi.org/10.1016/S1005-8850(07)60005-X

[PDF] SpringerLink

Improvement of fuel consumption and maintenance of heating furnaces using a modified heating pattern

Hsun-Heng Tsai, Shiuh-Ming Chang

2007,vol. 14,no.1pp. 27-32. https://doi.org/10.1016/S1005-8850(07)60006-1

[PDF] SpringerLink

A numerical method for solving the boundary layer equations of laminar natural convention about a vertical plate

Liancun Zheng, Chen Liang, Xinxin Zhang

2007,vol. 14,no.1pp. 33-35. https://doi.org/10.1016/S1005-8850(07)60007-3

[PDF] SpringerLink

Characteristics of microstructural evolution during deformation-enhanced ferrite transformation in Nb-microalloyed HSLA steel

Guoan Chen, Wangyue Yang, Shouzhen Guo, Zuqing Sun

2007,vol. 14,no.1pp. 36-40. https://doi.org/10.1016/S1005-8850(07)60008-5

[PDF] SpringerLink

Optimized composition for bonding assistant coat in carbon steel sandwich panels

Jing Liu, Jingtao Han

2007,vol. 14,no.1pp. 41-45. https://doi.org/10.1016/S1005-8850(07)60009-7

[PDF] SpringerLink

Effect of solid-solution temperature on the microstructure of Fe-Ni based high strength low thermal expansion (HSLTE) alloy

Yifan Tu, Jin Xu, Jianfu Zhang, Boping Zhang, Dongliang Zhao

2007,vol. 14,no.1pp. 46-51. https://doi.org/10.1016/S1005-8850(07)60010-3

[PDF] SpringerLink

Isothermal corrosion Fe₃Si alloy in liquid zinc

Wenjun Wang, Junping Lin, Yanli Wang, Guoliang Chen

2007,vol. 14,no.1pp. 52-55. https://doi.org/10.1016/S1005-8850(07)60011-5

[PDF] SpringerLink

New method for the preparation of semi-solid AlSi7Mg alloy slurry

Weimin Mao, Hai Lin, Yuelong Bai, Songfu Gao

2007,vol. 14,no.1pp. 56-60. https://doi.org/10.1016/S1005-8850(07)60012-7

[PDF] SpringerLink

Simulation of the precipitation process of Ni₇₅Al_xV_25-x alloys incorporated in the microelasticity field

Yongsheng Li, Zheng Chen, Yungang Li, Yanli Lu, Yongxin Wang

2007,vol. 14,no.1pp. 61-66. https://doi.org/10.1016/S1005-8850(07)60013-9

[PDF] SpringerLink

Growth behavior of electroless copper on silicon substrate

Shin-Shyan Wu, Wei-Long Liu, Ting-Kan Tsai, Shu-Huei Hsieh, Wen-Jauh Chen

2007,vol. 14,no.1pp. 67-71. https://doi.org/10.1016/S1005-8850(07)60014-0

[PDF] SpringerLink

Preparation of nanometer yellow iron and its UV absorption capacity

Chunbao Sun, Beihai Zhou, Nan Li, Ruiming Wang

2007,vol. 14,no.1pp. 72-76. https://doi.org/10.1016/S1005-8850(07)60015-2

[PDF] SpringerLink

Adsorption behavior of heavy metal ions by carbon nanotubes grown on microsized Al₂O₃ particles

Shu-Huei Hsieh, Jao-Jia Horng

2007,vol. 14,no.1pp. 77-84. https://doi.org/10.1016/S1005-8850(07)60016-4

[PDF] SpringerLink

Property of three-dimensional silica composites

Guangyao Jia, Zhimeng Guo

2007,vol. 14,no.1pp. 85-88. https://doi.org/10.1016/S1005-8850(07)60017-6

[PDF] SpringerLink

Sintering behavior, microstructure and properties of TiC-FeCr hard alloy

Farid Akhtar, Shiju Guo, Jawid Askari, Jianjun Tian

2007,vol. 14,no.1pp. 89-93. https://doi.org/10.1016/S1005-8850(07)60018-8

[PDF] SpringerLink

Export File

Citation

Format

Content