Ping-jun Tao, Yuan-zheng Yang, Xiao-jun Bai, Zhi-wei Xie, and Xian-chao Chen, Room temperature plastic deformation behavior of ZrCuNiAl bulk metallic glasses, Int. J. Miner. Metall. Mater., 17(2010), No. 3, pp.327-330. https://dx.doi.org/10.1007/s12613-010-0313-9
Cite this article as: Ping-jun Tao, Yuan-zheng Yang, Xiao-jun Bai, Zhi-wei Xie, and Xian-chao Chen, Room temperature plastic deformation behavior of ZrCuNiAl bulk metallic glasses, Int. J. Miner. Metall. Mater., 17(2010), No. 3, pp.327-330. https://dx.doi.org/10.1007/s12613-010-0313-9

Room temperature plastic deformation behavior of ZrCuNiAl bulk metallic glasses

Author Affilications
Funds: 

This work was financially supported by the National Natural Science Foundation of China (Nos.50971046, 50771037, and 50371020) and the Doctoral Fund of the Ministry of Education of China (No.200805620004).

  • The Zr62.55Cu17.55Ni9.9Al10 bulk metallic glass (BMG) was prepared by using copper-mold suction-casting. X-ray diffraction and differential scanning calorimetry were utilized to determine its structure and thermal stability. Uniaxial compression and Rockwell indentation tests were adopted to study the plastic deformation behavior at room temperature. The results show that the glass transition temperature and the onset temperature of exothermic reaction of the BMG are 651.5 and 748 K, respectively. During the compression test, the BMGs undergo an engineering strain of about 2.5%, i.e., true strain of 2.8%, and then fracture. The BMGs deform via the formation and propagation of shear bands. Under indentation loading, the BMGs deform through the formation of radiation-like and circular shear bands. The circular shear bands form earlier than the radiation-like ones. The formation mechanism of shear bands in the BMGs was analyzed and discussed.
  • Related Articles

    [1]Zheng Zhang, Xiao-chun Wu, Quan Zhou, Li-li Duan. Effect of microstructure on the impact toughness of a bainitic steel bloom for large plastic molds [J]. International Journal of Minerals, Metallurgy and Materials, 2015, 22(8): 842-850. DOI: 10.1007/s12613-015-1141-8
    [2]Yan-ping Zeng, Peng-yu Zhu, Ke Tong. Effect of microstructure on the low temperature toughness of high strength pipeline steels [J]. International Journal of Minerals, Metallurgy and Materials, 2015, 22(3): 254-261. DOI: 10.1007/s12613-015-1069-z
    [3]Jia-hua Liu, Lei Wang, Yang Liu, Xiu Song, Jiong Luo, Dan Yuan. Fracture toughness and fracture behavior of SA508-III steel at different temperatures [J]. International Journal of Minerals, Metallurgy and Materials, 2014, 21(12): 1187-1195. DOI: 10.1007/s12613-014-1026-2
    [4]De-jun Kong, Cun-dong Ye. Effects of laser heat treatment on the fracture morphologies of X80 pipeline steel welded joints by stress corrosion [J]. International Journal of Minerals, Metallurgy and Materials, 2014, 21(9): 898-905. DOI: 10.1007/s12613-014-0987-5
    [5]Yuan-qing Wang, Hui Zhou, Yong-jiu Shi, Bao-rui Feng. Mechanical properties and fracture toughness of rail steels and thermite welds at low temperature [J]. International Journal of Minerals, Metallurgy and Materials, 2012, 19(5): 409-420. DOI: 10.1007/s12613-012-0572-8
    [6]Jian-hua Liu, Hua-jie Wu, Yan-ping Bao, Min Wang. Inclusion variations and calcium treatment optimization in pipeline steel production [J]. International Journal of Minerals, Metallurgy and Materials, 2011, 18(5): 527-534. DOI: 10.1007/s12613-011-0473-2
    [7]De-liang Ren, Fu-ren Xiao, Peng Tian, Xu Wang, Bo Liao. Effects of welding wire composition and welding process on the weld metal toughness of submerged arc welded pipeline steel [J]. International Journal of Minerals, Metallurgy and Materials, 2009, 16(1): 65-70. DOI: 10.1016/S1674-4799(09)60011-X
    [8]Zengwu Zhao, Xinhua Wang, Guowei Chang. Effects of [S] and T[O] on strength and toughness of high purification low alloy steel plates [J]. International Journal of Minerals, Metallurgy and Materials, 2003, 10(5): 27-30.
    [9]Jinxu Li, Yimin Zeng, Yanbin Wang, Wuyang Chu. In Situ Studies of Deformation and Fracture in Sputtering Copper Film [J]. International Journal of Minerals, Metallurgy and Materials, 2000, 7(1): 38-41.
    [10]PENG Jihua, CHEN Guoliang. Two Modes and Criterion of Brittle Fracture [J]. International Journal of Minerals, Metallurgy and Materials, 1997, 4(1): 43-45.
  • Cited by

    Periodical cited type(19)

    1. Jiafan Chen, Xu Yuan, Zhenghao Gong, et al. Optimizing corrosion behaviours of an Al–Zn–Mg–Cu alloy through cold rolling and artificial ageing. Journal of Materials Science, 2024. DOI:10.1007/s10853-024-10155-z
    2. Yue Xiao, Aohua Guo, Huijie Cui, et al. Microstructure evolution, mechanical response, and corrosion resistance for a 2195 Al-Li alloy under different rolling reductions during cryorolling. Journal of Alloys and Compounds, 2024, 997: 174973. DOI:10.1016/j.jallcom.2024.174973
    3. Ergen Liu, Qinglin Pan, Bing Liu, et al. Microstructure Evolution of the Near-Surface Deformed Layer and Corrosion Behavior of Hot Rolled AA7050 Aluminum Alloy. Materials, 2023, 16(13): 4632. DOI:10.3390/ma16134632
    4. Tian-Shu Liu, Bai-Xin Dong, Hong-Yu Yang, et al. Review on role of intermetallic and ceramic particles in recrystallization driving force and microstructure of wrought Al alloys. Journal of Materials Research and Technology, 2023, 27: 3374. DOI:10.1016/j.jmrt.2023.10.098
    5. Temitope Olumide Olugbade. Review: Corrosion Resistance Performance of Severely Plastic Deformed Aluminium Based Alloys via Different Processing Routes. Metals and Materials International, 2023, 29(9): 2415. DOI:10.1007/s12540-023-01403-z
    6. Marjan Rezaei, Hamed Jamshidi Aval. The effect of friction stir-back extrusion speed on Al-Cu-Mg-Li alloy microstructure and corrosion behaviour. Canadian Metallurgical Quarterly, 2023. DOI:10.1080/00084433.2023.2297098
    7. Hanqing Xiong, Yuexin Zhou, Peng Yang, et al. Effects of cryorolling, room temperature rolling and aging treatment on mechanical and corrosion properties of 7050 aluminum alloy. Materials Science and Engineering: A, 2022, 853: 143764. DOI:10.1016/j.msea.2022.143764
    8. Hanqing Xiong, Yuexin Zhou, Charlie Kong, et al. Effect of retrogression treatment with different heating rates on microstructure, strength and corrosion behaviors of 7050 alloy. Materials Characterization, 2022, 186: 111819. DOI:10.1016/j.matchar.2022.111819
    9. Qianwen Ran, Hong Yan, Jiajia He, et al. Effect of TiO2@Carbon Nanotubes and Praseodymium on the Microhardness and Corrosion Properties of AZ91 Alloy. Metals and Materials International, 2022, 28(8): 2012. DOI:10.1007/s12540-021-01095-3
    10. Xianjie Zhou, Hanqing Xiong. Corrosion behavior of Al-Ce alloys in 3.5%NaCl solution. International Journal of Electrochemical Science, 2022, 17(1): 220137. DOI:10.20964/2022.02.06
    11. Hanqing Xiong, Lihong Su, Charlie Kong, et al. Development of High Performance of Al Alloys via Cryo‐Forming: A Review. Advanced Engineering Materials, 2021, 23(6) DOI:10.1002/adem.202001533
    12. Zhuo Fu, Hanqing Xiong, Guofeng Li, et al. Effect of Solution Temperature on Corrosion Behavior of 7050 Alloy after Heat Treatment in 3.5% NaCl Solution. International Journal of Electrochemical Science, 2021, 16(9): 210939. DOI:10.20964/2021.09.07
    13. Reza Pourhamid, Ali Shirazi. Microstructural evolution and mechanical behaviors of equal channel angular pressed copper. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2020, 234(1): 171. DOI:10.1177/0954406219872520
    14. N M Anas, T E Abioye, A S Anasyida, et al. Microstructure, mechanical and corrosion properties of cryorolled-AA5052 at various solution treatment temperatures. Materials Research Express, 2020, 7(1): 016535. DOI:10.1088/2053-1591/ab636c
    15. S. Vigneshwaran, K. Sivaprasad, R. Narayanasamy, et al. Superior Strength with Enhanced Fracture Resistance of Al-Mg-Sc Alloy Through Two-Step Cryo Cross Rolling. Metallurgical and Materials Transactions A, 2019, 50(7): 3265. DOI:10.1007/s11661-019-05253-6
    16. GuangWei Zhao, Jian Chen, Chong Ding, et al. Influence of the Composition on the Solidification Path, Microstructure Evolution and Mechanical Properties of Al-Cu-Mg Alloys. Journal of Materials Engineering and Performance, 2019, 28(11): 6980. DOI:10.1007/s11665-019-04409-0
    17. Ying Yan, Li-jia Chen, Guo-qiang Zhang, et al. Variation of the uniaxial tensile behavior of ultrafine-grained pure aluminum after cyclic pre-deformation. International Journal of Minerals, Metallurgy, and Materials, 2018, 25(6): 663. DOI:10.1007/s12613-018-1613-8
    18. C.Y. Cui, X.D. Li, C. Fang, et al. Effects of Marangoni convection on the embedding dynamic behavior of SiC nano-particles into the Al molten pool during laser micro-melting. Materials & Design, 2018, 143: 256. DOI:10.1016/j.matdes.2018.02.010
    19. S. Krymskiy, E. Avtokratova, O. Sitdikov, et al. Electrochemical corrosion of cryorolled and aged aluminum alloy. PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2019, DOI:10.1063/1.5132053

    Other cited types(0)

Catalog

    Share Article

    Article Metrics

    Article views (274) PDF downloads (8) Cited by(19)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return