Sumrerng Rukzon and Prinya Chindaprasirt, Strength, porosity, and chloride resistance of mortar using the combination of two kinds of pozzolanic materials, Int. J. Miner. Metall. Mater., 20(2013), No. 8, pp. 808-814. https://doi.org/10.1007/s12613-013-0800-x
Cite this article as:
Sumrerng Rukzon and Prinya Chindaprasirt, Strength, porosity, and chloride resistance of mortar using the combination of two kinds of pozzolanic materials, Int. J. Miner. Metall. Mater., 20(2013), No. 8, pp. 808-814. https://doi.org/10.1007/s12613-013-0800-x
Sumrerng Rukzon and Prinya Chindaprasirt, Strength, porosity, and chloride resistance of mortar using the combination of two kinds of pozzolanic materials, Int. J. Miner. Metall. Mater., 20(2013), No. 8, pp. 808-814. https://doi.org/10.1007/s12613-013-0800-x
Citation:
Sumrerng Rukzon and Prinya Chindaprasirt, Strength, porosity, and chloride resistance of mortar using the combination of two kinds of pozzolanic materials, Int. J. Miner. Metall. Mater., 20(2013), No. 8, pp. 808-814. https://doi.org/10.1007/s12613-013-0800-x
Department of Civil Engineering, Faculty of Engineering, Rajamangala University of Technology Phra Nakhon, Bangkok, 10800, Thailand
Sustainable Infrastructure Research and Development Center, Department of Civil Engineering, Faculty of Engineering, Khon Kaen University, Khon Kaen, 40002, Thailand
This article presents a study on the resistance to chloride penetration, corrosion, porosity, and strength of mortar containing fine fly ash (FA), ground rice husk-bark ash (RB), and ground bagasse ash (BA). Ordinary Portland cement (CT) was blended with a single pozzolan and two pozzolans. Strength, porosity, rapid chloride penetration, immersion, and corrosion tests were performed to characterize the mortar. Test results showed that the use of ternary blends of CT, FA, and RB or BA decreased the porosity of the mortar, as compared with binary blended mortar containing CT and RB or BA. The resistance to chloride penetration of the mortar improved substantially with partial replacement of CT with FA, RB, and BA. The use of ternary blends of CT, FA and RB or BA produced the mortar with good strength and resistance to chloride penetration. The resistance to chloride penetration was higher with an increase in the replacement level due to the reduced calcium hydroxide.