Effect of rare earth and alloying elements on the thermal conductivity of austenitic medium manganese steel

Shao-chun Chen; Hong-xiang Ye; Xin-qiang Lin

doi:10.1007/s12613-017-1449-7

Volume 24 Issue 6

Jun. 2017

Turn off MathJax

Article Contents

Abstract

References

International Journal of Minerals, Metallurgy and Materials > 2017 > 24(6): 670-674. > DOI: 10.1007/s12613-017-1449-7

Shao-chun Chen, Hong-xiang Ye, and Xin-qiang Lin, Effect of rare earth and alloying elements on the thermal conductivity of austenitic medium manganese steel, Int. J. Miner. Metall. Mater., 24(2017), No. 6, pp.670-674. https://dx.doi.org/10.1007/s12613-017-1449-7

Cite this article as:

PDF (566 KB)

Research Article

Effect of rare earth and alloying elements on the thermal conductivity of austenitic medium manganese steel

Author Affilications

School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350116, China

Received: 08 October 2016; Revised: 06 January 2017; Accepted: 11 January 2017;

Graphical Abstract

Abstract

Abstract

The influence of different contents of Cr, Mo, and rare earth element (RE) additives on the thermal conductivity of austenitic medium manganese steel was studied and discussed. The results show that the addition of Cr in medium manganese steel can improved the ordering of C-Mn atomic clusters, so as to improve the steel's thermal conductivity. However, Cr will lead to precipitation of a great deal of carbides in medium manganese steel when its content is greater than 4wt%. These carbides would aggregate around the grain boundary, and as a result, the thermal conductivity is decreased. By the addition of Mo whose content is about 2wt%, spherical carbides will be formed, thus improving the thermal conductivity of the medium manganese steel. The interaction between rare earth elements and alloying elements will raise both the thermal conductivity and the wear-resisting property of medium manganese steel.
- medium manganese steel,
- alloying elements,
- rare earth,
- thermal conductivity

FullText(HTML)

References (18)

References

X.J. Chen, High Manganese Steel, China Machine Press, Beijing, 1989, p. 58.

J.P. Xie, W.Y. Wang, J.W. Li, A.Q. Wang, Y.R. Zhao, and L.L. Li. Wear-Resistant Austentic Manganese Steel, Science Press, Beijing, 2008, p. 66.

S.J. Zhang, Analysis on machining process performance of high manganese steel, Tool Eng., 43(2009), No. 3, p. 12.

L.Y. Xu, Q. Wu, and Y.Z. Li, Temperature investigation of high speed milling high manganese steel, Adv. Mater. Res., 442(2012), p. 139.

C.F. Wu, X.H. Wang, H.L. Zhang, and X.T. Wang, Effect of alloy elements on the mechanical properties and pitting corrosion resistance of 316 LN austenitic stainless steel, Chin. J. Eng., 37(2015), No. 9, p. 1157.

C.L. Zhang, Z. Yang, J.H. Sun, H.D. Zhao, P.Y. Li, and Y.Z. Liu, Effect of alloying elements on austenite grain growth and microstructure refinement in a non-quenched steel for crankshafts, Chin. J. Eng., 37(2015), No. 2, p. 175.

H.H. Li, X.Q. Sun, S.Z. Zhang, Q.Y. Zhao, and G.Z. Wang, Application of rare-earth element Y in refining impure copper, Int. J. Miner. Metall. Mater., 22(2015), No. 5, p. 453.

H.X. Mou, X.H. Li, and S.T. Liu, Analysis of large-dimension rare earth inclusion in steels by metallographic microscope and TEM, Appl. Mech. Mater., 182-183(2012), p. 288.

M.M. Song, B. Song, Z.B. Yang, S.H. Zhang, G.Y. Song, and C.L. Hu, Microstructure and inclusion evolution in rare earth treated C-Mn steel, Chin. J. Eng., 37(2015), No.12, p. 1564.

X.H. Yang, P.F. Wu and Y.C. Wu, and G.G. Cheng, Behavior of rare earth on modifying inclusion in special steel, J. Chin. Rare Earth Soc., 28(2010), No. 5, p. 612.

H.B. Wu, Influence of rare earth elements on liquid quality of high manganese steel, Hot Work. Technol., 45(2016), No. 19, p. 118.

X.R. Wang and B.Q. Chen, Measurement of the effects of rare earth on Type 304 stainless steel stacking fault energy, Ordn. Mater. Sci. Eng., 1985, No. 10, p. 13.

M.J. Peet, H.S. Hasan, and H.K.D.H. Bhadeshia, Prediction of thermal conductivity of steel, Int. J. Heat Mass Transfer, 54(2011), No. 11-12, p. 2602.

G.Q. Han and X.L. Hu, Wear and fracture mechanism of TIN coated carbide tool for austenitic manganese steel cutting, Cement. Carbide, 22(2005), No. 2, p. 100.

Q.H. Han, Y.L. Kang, X.M. Zhao, L.F. Gao, and X.S. Qiu, High-temperature properties and microstructure of Mo microalloyed ultra-high-strength steel, Int. J. Miner. Metall. Mater., 18(2011), No.4, p. 407.

H.H. Zheng, A.M. Zhao, J.L. Cao, and Z.D. Geng, Effect of water toughening on microstructure and mechanical properties of high manganese steel casting, Heat Treat. Met., 39(2014), No. 2, p.112.

S.C. Chen, K.Z. Zhu, Y. Lin, Y.M. Lu, Y.B. Wu, X.Q. Lin, and X.Y. Lin, The effect of alloying elements on the thermal conductivity of austenitic manganese steel, Ind. Heat., 45(2016), No. 1, p. 22.

S. Tian, X.C. Li, and Z.T. Liu, Physical Property of Metal, National Defend Industry Press, Beijing, 1985, p. 33.

[1]	Ze-yun Cai, Bo Song, Long-fei Li, Zhen Liu, Xiao-kang Cui. Effect of CeO₂ on heat transfer and crystallization behavior of rare earth alloy steel mold fluxes [J]. International Journal of Minerals, Metallurgy and Materials, 2019, 26(5): 565-572. DOI: 10.1007/s12613-019-1765-1
[2]	Li-ying Qi, Su-e Hao, Tian-cheng Sun. Preparation of rare-earth-modified medical stone powders and their application as conductive fillers [J]. International Journal of Minerals, Metallurgy and Materials, 2019, 26(2): 260-266. DOI: 10.1007/s12613-019-1731-y
[3]	Shuang Huang, Hua-lan Xu, Sheng-liang Zhong, Lei Wang. Microwave hydrothermal synthesis and characterization of rare-earth stannate nanoparticles [J]. International Journal of Minerals, Metallurgy and Materials, 2017, 24(7): 794-803. DOI: 10.1007/s12613-017-1463-9
[4]	Zhong-wei Chen, Ming-jun Tang, Kai Zhao. Effect of rare earth samarium addition on the kinetics of precipitation in Al-Cu-Mn casting alloy [J]. International Journal of Minerals, Metallurgy and Materials, 2014, 21(2): 155-161. DOI: 10.1007/s12613-014-0879-8
[5]	Shengjun Zhang, Bo Song, Xihua Liu, Qing Lin, Biyan Wang. Morphology, chemical compositions and size distribution of rare earth oxides in pure iron [J]. International Journal of Minerals, Metallurgy and Materials, 2003, 10(2): 30-33.
[6]	Kaikun Wang, Yonglin Kang, KuiZhang, Lin An. Effect of rare earth elements on the microstructure and property for magnesium alloy AM60B [J]. International Journal of Minerals, Metallurgy and Materials, 2002, 9(6): 466-469.
[7]	Kaikun Wang, Yonglin Kang, Kui Zhang. Effects of rare earth elements on the microstructure and properties of magnesium alloy AZ91D [J]. International Journal of Minerals, Metallurgy and Materials, 2002, 9(5): 363-366.
[8]	Tianzhu Gao, Jiuqing Li. Influence of oxidant KMnO₄ on film-forming process of rare earth metal conversion coating on LY12 aluminum alloy [J]. International Journal of Minerals, Metallurgy and Materials, 2002, 9(3): 216-220.
[9]	Yimin Sun, Zhiyu Qiao, Minghong He. Prediction of Enthalpies of Fusion for Divalent Rare Earth Halides Based on Modeling by Artificial Neural Networks and Pattern Recognition [J]. International Journal of Minerals, Metallurgy and Materials, 1999, 6(1): 24-26.
[10]	ZHAO Chuang, LIN Qin, CHEN Ning, YE Wen, MA Li. Development of Rare Earth Hydrogen Storage Alloys: Correlation Between Structure, Stability, and Hydrating Properties [J]. International Journal of Minerals, Metallurgy and Materials, 1997, 4(4): 28-33.

Cited By

Cited by

Periodical cited type(15)

1.	Ji Zhang, Lifeng Zhang, Qiang Ren, et al. Effect of Cerium on Mechanisms of Pitting Corrosion Induced by Inclusions in a 304 Stainless Steel. ISIJ International, 2023, 63(5): 779. DOI:10.2355/isijinternational.ISIJINT-2022-333
2.	Qingliang Wang, Junxiang Wang. Investigation of Wear Property and Strengthening Mechanism of Hot-Rolled Medium Manganese Steel on Condition of Slurry Erosion Wear. Journal of Tribology, 2023, 145(1) DOI:10.1115/1.4055716
3.	Jingru Yan, Muyuan Zhou, Hui Wu, et al. A Review of Key Factors Affecting the Wear Performance of Medium Manganese Steels. Metals, 2023, 13(7): 1152. DOI:10.3390/met13071152
4.	Yan Liu, Ji-Bing Sun, Shi-Jia Liu, et al. Optimization of Ultra-High and High Manganese Steel Based on Artificial Neural Network and Genetic Algorithm. Journal of Materials Engineering and Performance, 2023, 32(21): 9864. DOI:10.1007/s11665-023-07827-3
5.	Xinyu Cheng, Yi He, Ruxia Song, et al. Study of mechanical character and corrosion properties of La2O3 nanoparticle reinforced Ni-W composite coatings. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2022, 652: 129799. DOI:10.1016/j.colsurfa.2022.129799
6.	Yang Liu, Jing Li, Ruming Geng, et al. Effect of Cerium Content on Precipitation Behavior of Inclusions in High-Strength Low-Alloy Steel. Metallography, Microstructure, and Analysis, 2022, 11(4): 560. DOI:10.1007/s13632-022-00861-y
7.	Huixiang Yu, Dexin Yang, Jiaming Zhang, et al. Effect of Al content on the reaction between Fe-10Mn-xAl (x = 0.035wt%, 0.5wt%, 1wt%, and 2wt%) steel and CaO-SiO2-Al2O3-MgO slag. International Journal of Minerals, Metallurgy and Materials, 2022, 29(2): 256. DOI:10.1007/s12613-021-2298-y
8.	Huixiang Yu, Dexin Yang, Muming Li, et al. Effect of CaO–SiO2–Al2O3–MgO top slag on solute elements and non-metallic inclusions in Fe-xMn(x = 10, 20 mass pct) steel. Metallurgical Research & Technology, 2021, 118(3): 302. DOI:10.1051/metal/2021025
9.	Hao Wang, Yan-ping Bao, Jian-guo Zhi, et al. Effect of Rare Earth Ce on the Morphology and Distribution of Al<sub>2</sub>O<sub>3</sub> Inclusions in High Strength IF Steel Containing Phosphorus during Continuous Casting and Rolling Process. ISIJ International, 2021, 61(3): 657. DOI:10.2355/isijinternational.ISIJINT-2020-053
10.	Junwei Fu, Jiangchun Wang. Effect of Mo Content on the Thermal Conductivity and Corrosion Resistance of Die Steel. Journal of Materials Engineering and Performance, 2021, 30(11): 8438. DOI:10.1007/s11665-021-06043-1
11.	Min Wang, Shuai Gao, Xin Li, et al. Reaction Behaviour between Cerium Ferroalloy and Molten Steel during Rare Earth Treatment in the Ultra-low Carbon Al-killed Steel. ISIJ International, 2021, 61(5): 1524. DOI:10.2355/isijinternational.ISIJINT-2020-678
12.	Yang Liu, Yan-hui Sun, Hao-tian Wu. Effects of chromium on the microstructure and hot ductility of Nb-microalloyed steel. International Journal of Minerals, Metallurgy and Materials, 2021, 28(6): 1011. DOI:10.1007/s12613-020-2092-2
13.	Hao Wang, Yan-ping Bao, Ming Zhao, et al. Effect of Ce on the cleanliness, microstructure and mechanical properties of high strength low alloy steel Q690E in industrial production process. International Journal of Minerals, Metallurgy and Materials, 2019, 26(11): 1372. DOI:10.1007/s12613-019-1871-0
14.	Rayappa Shrinivas Mahale, Krishnamurthy P. Goggi, Shamanth Vasanth, et al. Advancements in Powder Metallurgy. Advances in Chemical and Materials Engineering, DOI:10.4018/978-1-6684-9385-4.ch004
15.	Rayappa Shrinivas Mahale, Shamanth V., P.C. Sharath, Vaibhav Sanjay Raibole, Krishnamurthy Prahlad Goggi, Gangadhar M. Kanaginahal, Vivek G. Tiwary, Shashanka Rajendrachari, Prashant Kakkamari Mechanical Alloying of Ferrous and Non-Ferrous Alloys. DOI:10.1016/B978-0-443-16151-3.00012-9