Cite this article as: |
Kichakeswari Tudu, Sagar Pal, and N. R. Mandre, Comparison of selective flocculation of low grade goethitic iron ore fines using natural and synthetic polymers and a graft copolymer, Int. J. Miner. Metall. Mater., 25(2018), No. 5, pp. 498-504. https://doi.org/10.1007/s12613-018-1596-5 |
Kichakeswari Tudu E-mail: tudukichakeswari10@gmail.com
[1] |
A.C. Araujo, P.R.M. Viana, and A.E.C. Peres, Reagents in iron ores flotation, Miner. Eng., 18(2005), No. 2, p. 219.
|
[2] |
M. Ma, Froth flotation of iron ores, Int. J. Min. Eng. Miner. Process., 1(2012), No. 2, p. 56.
|
[3] |
M. Dworzanowski, Maximizing the recovery of fine iron ore using magnetic separation, J. South Afr. Inst. Min. Metall., 112(2012), No. 3, p. 197.
|
[4] |
S. Roy, Recovery improvement of fine iron ore particles by multi gravity separation, Open Miner. Process. J., 2(2009), p. 17.
|
[5] |
P. Pradip, Beneficiation of alumina rich Indian iron ore slimes, Met. Mater. Processes, 6(1994), No. 3, p. 179.
|
[6] |
N.R. Mandre, Selective flocculation of low-grade iron ore fines, [in] XXVI International Mineral Processing Congress, New Delhi, 2012, p. 3220.
|
[7] |
L.O. Filippov, V.V. Severov, and I.V. Filippova, Mechanism of starch adsorption on Fe–Mg–Al-bearing amphiboles, Int. J. Miner. Process., 123(2013), No. 6, p. 120.
|
[8] |
L. Panda, S.K. Biswal, and V. Tathavadkar, Beneficiation of synthetic iron ore kaolinite mixture using selective flocculation, J. Miner. Mater. Charact. Eng., 9(2010), No. 11, p. 973.
|
[9] |
M. Dash, R.K. Dwari, S.K. Biswal, P.S.R. Reddy, P. Chattopadhyay, and B.K. Mishra, Studies on the effect of flocculant adsorption on the dewatering of iron ore tailings, Chem. Eng. J., 173(2011), No. 2, p. 318.
|
[10] |
R. Kumar and N.R. Mandre, Characterization and beneficiation of iron ore tailings by selective flocculation, Trans. Indian Inst. Met., 69(2016), No. 7, p. 1459.
|
[11] |
S.A. Ravishankar, Pradip, and N.K. Khosla, Selective flocculation of iron oxide from its synthetic mixtures with clays: a comparison of polyacrylic acid and starch polymers, Int. J. Miner. Process., 43(1995), No. 3-4, p. 235.
|
[12] |
S. Mathur, P. Singh, and B.M. Moudgil, Advances in selective flocculation technology for solid-solid separations, Int. J. Miner. Process., 58(2000), No. 1-4, p. 201.
|
[13] |
M. Schintu, P. Meloni, and A. Contu, Aluminum fractions in drinking water from reservoirs, Ecotoxicol. Environ. Saf., 46(2000), No. 1, p. 29.
|
[14] |
J. Xiao and Q. Zhou, Natural Polymer Flocculants, Chemical Industry Press, Beijing, 2005.
|
[15] |
A.K. Sarkar, N.R. Mandre, A.B. Panda, and S. Pal, Amylopectin graft with poly (acrylic acid): Development and application of a high performance flocculant, Carbohydr. Polym., 95(2013), No. 2, p. 753.
|
[16] |
W.P. Talmage and E.B. Fitch, Determining thickener unit areas, Ind. Eng. Chem., 47(1955), No. 1, p. 38.
|
[17] |
N.R. Mandre and D. Panigrahi, Studies on selective flocculation of complex sulphides using cellulose xanthate, Int. J. Miner. Process., 50(1997), No. 3, p. 177.
|