Biogenic amino acid methionine-based corrosion inhibitors of mild steel in acidic media

L. K. M. O. Goni; M. A. Jafar Mazumder; S. A. Ali; M. K. Nazal; H. A. Al-Muallem

doi:10.1007/s12613-019-1754-4

Volume 26 Issue 4

Apr. 2019

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2019 > 26(4): 467-482

L. K. M. O. Goni, M. A. Jafar Mazumder, S. A. Ali, M. K. Nazal, and H. A. Al-Muallem, Biogenic amino acid methionine-based corrosion inhibitors of mild steel in acidic media, Int. J. Miner. Metall. Mater., 26(2019), No. 4, pp. 467-482. https://doi.org/10.1007/s12613-019-1754-4

Cite this article as:

L. K. M. O. Goni, M. A. Jafar Mazumder, S. A. Ali, M. K. Nazal, and H. A. Al-Muallem, Biogenic amino acid methionine-based corrosion inhibitors of mild steel in acidic media, Int. J. Miner. Metall. Mater., 26(2019), No. 4, pp. 467-482. https://doi.org/10.1007/s12613-019-1754-4

Citation:

PDF( 3884 KB)

Research Article

Biogenic amino acid methionine-based corrosion inhibitors of mild steel in acidic media

+ Author Affiliations

Corresponding authors:
M. A. Jafar Mazumder E-mail: jafar@kfupm.edu.sa

S. A. Ali E-mail: shaikh@kfupm.edu.sa
Received: 29 June 2018; Revised: 24 October 2018; Accepted: 30 October 2018

Abstract

Abstract

N,N-Diallyl methionine ethyl ester hydrochloride 5 underwent alternating copolymerization with SO₂ via the Butler cyclopolymerization protocol in dimethyl sulfoxide (DMSO) to give water-soluble cycloterpolymer 6 with a~1:1 molar ratio of sulfide and sulfoxide groups as a result of oxygen transfer from DMSO. Half of the sulfide groups in 6 , upon oxidation with H₂O₂, afforded polymer sulfoxide 7 and polymer sulfone 8 . The solution properties of these polymers were determined via a viscometric technique. The thermal stability of these polymers was determined by thermogravimetric analysis. The inhibition efficiency obtained from gravimetric mass loss, potentiodynamic polarization, and electrochemical impedance spectroscopy techniques agreed well with each other. The corrosion efficiencies increase with increasing concentration of the polymers. At a polymer concentration of 175 μM, the maximum inhibition efficiency of copolymer compounds 6-8 was determined to be 92%, 97%, and 95%, respectively. The synthesized polymer compounds acted as mixed-type inhibitors. Polymer compound 7 adsorbed onto the metal surface via chemisorption and physisorption and obeyed Langmuir, Temkin, and Freundlich adsorption isotherms. Analyses by X-ray photoelectron spectroscopy and scanning electron microscopy-energy-dispersive X-ray spectroscopy indicated that the adsorbed polymers formed a thin film on the metal surface and prevented further corrosive attack.
- cyclopolymerization;
- methionine;
- methionine sulfoxide;
- methionine sulfone;
- diallylamine salt;
- corrosion inhibition

FullText(HTML)

Supplements(0)

References(33)

References

[1]	M.A. Kiani, M.F. Mousavi, S. Ghasemi, M. Shamsipur, and S.H. Kazemi, Inhibitory effect of some amino acids on corrosion of Pb-Ca-Sn alloy in sulfuric acid solution, Corros. Sci., 50(2008), No. 4, p. 1035.
[2]	V.S. Sastri, Corrosion Inhibitors:Principles and Applications, Wiley, New York, 1998.
[3]	R.W. Revie and H.H. Uhlig, Corrosion and Corrosion Control: An Introduction to Corrosion Science and Engineering, 4th Ed., Wiley-Interscience, New York, 2008.
[4]	B.D.B. Tiu and R.C. Advincula, Polymeric corrosion inhibitors for the oil and gas industry:Design principles and mechanism, React. Funct. Polym., 95(2015), p. 25.
[5]	S. Zor, F. Kandemirli, and M. Bingul, Inhibition effects of methionine and tyrosine on corrosion of iron in HCl solution:Electrochemical, FTIR, and quantum-chemical study, Prot. Met. Phys. Chem. Surf., 45(2009), No. 1, p. 46.
[6]	P. Shanmugasundaram, T. Sumathi, G. Chandramohan, and G.N.K. Ramesh-Bapu, Corrosion inhibition study of is:1062 grade A-low carbon steel in 1 M HCl by L-Methionine-weight loss, ICP-OES and SEM-EDX studies, Int. J. Curr. Res., 5(2013), No. 8, p. 2183.
[7]	E.E. Oguzie, Y. Li, and F.H. Wang, Corrosion inhibition and adsorption behavior of methionine on mild steel in sulfuric acid and synergistic effect of iodide ion, J. Colloid Interface Sci., 310(2007), No. 1, p. 90.
[8]	B. Hammouti, A. Aouniti, M. Taleb, M. Brighli, and S. Kertit, L-Methionine methyl ester hydrochloride as a corrosion inhibitor of iron in acid chloride solution, Corrosion, 51(1995), No. 6, p. 411.
[9]	K.F. Khaled, Corrosion control of copper in nitric acid solutions using some amino acids-A combined experimental and theoretical study, Corros. Sci., 52(2010), No. 10, p. 3225.
[10]	M.A.J. Mazumder, H.A. Al-Muallem, S.A. Ali, and M.K. Estaitie, Cyclopolymer containing residues of methionine and synthesis and uses thereof, U.S. patent, No. US9556301B1, 2017.
[11]	Y.N. Wang, C.F. Dong, D.W. Zhang, P.P. Ren, L. Li, and X.G. Li, Preparation and characterization of a chitosan-based low-pH-sensitive intelligent corrosion inhibitor, Int. J. Miner. Metall. Mater., 22(2015), No. 9, p. 998.
[12]	R. Bacskai, A.H. Schroeder, and D.C. Young, Hydrocarbon-soluble alkylaniline/formaldehyde oligomers as corrosion inhibitors, J. Appl. Polym. Sci., 42(1991), p 2435.
[13]	G.B. Butler, Cyclopolymerization and Cyclocopolymerization, CRC Press, Florida, 1992.
[14]	P.K. Singh, V.K. Singh, and M. Singh, Zwitterionic polyelectrolytes:A review, E-Polymers, 2007, No. 030, p. 1.
[15]	W. Jaeger, J. Bohrisch, and A. Laschewsky, Synthetic polymers with quaternary nitrogen atoms-Synthesis and structure of the most used type of cationic polyelectrolytes, Prog. Polym. Sci., 35(2010), No. 5, p. 511.
[16]	G.B. Butler, Cyclopolymerization, J. Polym. Sci., Part A:Polym. Chem., 38(2000), No. 8, p. 3451.
[17]	V.S. Saji, A review on recent patents in corrosion inhibitors, Recent Pat. Corros. Sci., 2(2010), p. 6.
[18]	S.A. Ali and O.C.S. Al-Hamouz, Comparative solution properties of cyclocopolymers having cationic, anionic, zwitterionic and zwitterionic/anionic backbones of similar degree of polymerization, Polymer, 53(2012), No. 15, p. 3368.
[19]	N.Y. Abu-Thabit, I.W. Kazi, H.A. Al-Muallem, and S.A. Ali, Phosphonobetaine/sulfur dioxide copolymer by Butler's cyclopolymerization process, Eur. Polym. J., 47(2011), No. 5, p. 1113.
[20]	S.A. Ali, Y. Umar, B.F. Abu-Sharkh, and H.A. Al-Muallem, Synthesis and comparative solution properties of single-, twin-, and triple-tailed associating ionic polymers based on diallylammonium salts, J. Polym. Sci., Part A:Polym. Chem., 44(2006), No. 19, p. 5480.
[21]	H.A. Al-Muallem, M.A.J. Mazumder, M.K. Estaitie, and S.A. Ali, A novel cyclopolymer containing residues of essential amino acid methionine:Synthesis and application, Iran. Polym. J., 24(2015), No. 7, p. 541.
[22]	S.A. Ali, L.K.M.O. Goni, and M.A.J. Mazumder, Butler's cyclopolymerizaton protocol in the synthesis of diallylamine salts/sulfur dioxide alternate polymers containing amino acid residues, J. Polym. Res., 24(2017), No. 11, p 184.
[23]	S.Z. Duan and Y.L. Tao, Interface Chemistry, Higher Education Press, Beijing, 1990, p. 124.
[24]	M. Erbil, The determination of corrosion rates by analysis of AC impedance diagrams, Chim. Acta. Turc., 1(1988), No. 1, p. 59.
[25]	P.C. Okafor, X. Liu, and Y.G. Zheng, Corrosion inhibition of mild steel by ethylamino imidazoline derivative in CO₂-saturated solution, Corros. Sci., 51(2009), No. 4, p. 761.
[26]	L. Larabi, Y. Harek, M. Traisnel, and A. Mansri, Synergistic influence of poly (4-vinylpyridine) and potassium iodide on inhibition of corrosion of mild steel in 1 M HCl, J. Appl. Electrochem., 34(2014), No. 8, p. 833.
[27]	T. Arsian, F. Kandemirli, E.E. Ebenso, I. Love, and H. Alemu, Quantum chemical studies on the corrosion inhibition of some sulphonamides on mild steel in acidic medium, Corros. Sci., 51(2009), No. 1, p. 35.
[28]	G.Y. Elewady, I.A. El-Said, and A.S. Fouda, Anion surfactants as corrosion inhibitors for aluminium dissolution in HCl solutions, Int. J. Electrochem. Sci., 3(2008), No. 2, p. 177.
[29]	G.E. Badr, The role of some thiosemicarbozide derivatives as corrosion inhibitors for carbon steel in acidic media, Corros. Sci., 51(2009), No. 11, p. 2529.
[30]	C.G. Dariva and A.F. Galio, Corrosion Inhibitors-Principles, Mechanisms and Applications, IntechOpen, UK, 2014.
[31]	L. Afia, R. Salghi, L. Bammou, E. Bazzi, B. Hammouti, L. Bazzi, and A. Bouyanzer, Anti-corrosive properties of argan oil on C38 steel in molar HCl solution, J. Saudi Chem. Soc., 18(2014), No. 1, p. 19.
[32]	O. Olivares-Xometl, N.V. Likhanova, M.A. Domínguez-Aguilar, J.M. Hallen, L.S. Zamudio, and E. Arce, Surface analysis of inhibitor films formed by imidazolines and amides on mild steel in an acidic environment, Appl. Surf. Sci., 252(2006), No. 6, p. 2139.
[33]	M. Tourabi, K. Nohair, M. Traisnel, C. Jama, and F. Bentiss, Electrochemical and XPS studies of the corrosion inhibition of carbon steel in hydrochloric acid pickling solutions by 3,5-bis (2-thienylmethyl)-4-amino-1,2,4-triazole, Corros. Sci., 75(2013), p. 123.