Cite this article as: |
Xue-feng Bai, Yan-hui Sun, Rui-mei Chen, Yi-min Zhang, and Yi-fan Cai, Formation and thermodynamics of CaS-bearing inclusions during Ca treatment in oil casting steels, Int. J. Miner. Metall. Mater., 26(2019), No. 5, pp. 573-587. https://doi.org/10.1007/s12613-019-1766-0 |
Yan-hui Sun E-mail: sunyanhui@metall.ustb.edu.cn
[1] |
L.F. Zhang and B.G. Thomas, State of the art in the control of inclusions during steel ingot casting, Metall. Mater.Trans. B, 37(2006), No. 5, p. 733.
|
[2] |
Y.I. Ito, S. Nara, Y. Kato, and M. Suda, Shape control of alumina inclusions by double calcium addition treatment, Tetsu-to-Hagane, 93(2007), No. 5, p. 355.
|
[3] |
C.F. Dong, K. Xiao, Z.Y. Liu, W.J. Yang, and X.G. Li, Hydrogen induced cracking of X80 pipeline steel, Int. J. Miner. Metall. Mater., 17(2010), No. 5, p. 579.
|
[4] |
F.F. Ai, X.L. Xu, Y.Q. Chen, B. Zhong, L. Li, P. Gao, and D.G. Xie, Influence of inclusions on hydrogen induced cracking of oil well pipe steel, Corros. Prot., 33(2012), No. 5, p. 422.
|
[5] |
Y.I. Ito, M. Suda, Y. Kato, H. Nakato, and K.I. Sorimachi, Kinetics of shape control of alumina inclusions with calcium treatment in line pipe steel for sour service, ISIJ Int., 36(1996), p. S148.
|
[6] |
J.H. Park, S.B. Lee, and D.S. Kim, Inclusion control of ferritic stainless steel by aluminum deoxidation and calcium treatment, Metall. Mater.Trans. B, 36(2005), No. 1, p. 67.
|
[7] |
J. Guo, S.S. Cheng, H.J. Guo, and Y.G. Mei, Novel mechanism for the modification of Al2O3-based inclusions in ultra-low carbon Al-killed steel considering the effects of magnesium and calcium, Int. J. Miner. Metall. Mater., 25(2018), No. 3, p. 280.
|
[8] |
S.K. Choudhary and A. Ghosh, Thermodynamic evaluation of formation of oxide-sulfide duplex inclusions in steel, ISIJ Int., 48(2008), No. 11, p. 1552.
|
[9] |
Y. Miyashita and K. Nishikawa, The deoxidation of liquid iron with calcium, Tetsu-to-Hagane, 57(1971), No. 13, p. 1969.
|
[10] |
Q.Y. Han, X.D. Zhang, D. Chen, and P.F. Wang, The calcium-phosphorus and the simultaneous calcium-oxygen and calcium-sulfur equilibria in liquid iron, Metall. Trans. B, 19(1988), No. 4, p. 617.
|
[11] |
S.W. Cho and H. Suito, Assessment of calcium-oxygen equilibrium in liquid iron, ISIJ Int., 34(1994), No. 3, p. 265.
|
[12] |
K. Taguchi, H. Ono-Nakazato, D. Nakai, T. Usui, and K. Marukawa, Deoxidation and desulfurization equilibria of liquid iron by calcium, ISIJ Int., 43(2003), No. 11, p. 1705.
|
[13] |
K. Tshilombo, Determination of inclusions in liquid steel after calcium treatment, Int. J. Miner. Metall. Mater., 17(2010), No. 1, p. 28.
|
[14] |
J.H. Liu, H.J. Wu, Y.P. Bao, and M. Wang, Inclusion variations and calcium treatment optimization in pipeline steel production, Int. J. Miner. Metall. Mater., 18(2011), No. 5, p. 527.
|
[15] |
Y. Liu and L.F. Zhang, Relationship between dissolved calcium and total calcium in Al-killed steels after calcium treatment, Metall. Mater.Trans. B, 49(2018), No. 4, p. 1624.
|
[16] |
G. Ye, P. Jönsson, and T. Lund, Thermodynamics and kinetics of the modification of Al2O3 inclusions, ISIJ Int., 36(1996), p. S105.
|
[17] |
J.M.A. Geldenhuis and P.C. Pistorius, Minimisation of calcium additions to low carbon steel grades, Ironmaking Steelmaking, 27(2000), No. 6, p. 442.
|
[18] |
G. Xu, Z.H. Jiang, and Y. Li, Formation mechanism of cas-bearing inclusions and the rolling deformation in Al-killed, low-alloy steel with Ca treatment, Metall. Mater.Trans. B, 47(2016), No. 4, p. 2411.
|
[19] |
K. Kawakami, T. Taniguchi, and K. Nakashima, Generation mechanisms of non-metallic inclusions in high-cleanliness steel, Tetsu-to-Hagane, 93(2007), No. 12, p. 743.
|
[20] |
S.F. Yang, Q.Q. Wang, L.F. Zhang, J.S. Li, and K. Peaslee, Formation and modification of MgO·Al2O3-based inclusions in alloy steels, Metall. Mater.Trans. B, 43(2012), No. 4, p. 731.
|
[21] |
Y. Higuchi, M. Numata, S. Fukagawa, and K. Shinme, Inclusion modification by calcium treatment, ISIJ Int., 36(1996), p. S151.
|
[22] |
N. Verma, P.C. Pistorius, R.J. Fruehan, M. Potter, M. Lind, and S. Story, Transient inclusion evolution during modification of alumina inclusions by calcium in liquid steel:Part I. Background, experimental techniques and analysis methods, Metall. Mater.Trans. B, 42(2011), No. 4, p. 711.
|
[23] |
N. Verma, P.C. Pistorius, R.J. Fruehan, M. Potter, M. Lind, and S.R. Story, Transient inclusion evolution during modification of alumina inclusions by calcium in liquid steel:Part Ⅱ. Results and discussion, Metall. Mater.Trans. B, 42(2011), No. 4, p. 720.
|
[24] |
Y. Ren, L.F. Zhang, and S.S Li, Transient evolution of inclusions during calcium modification in linepipe steels, ISIJ Int.,54(2014), No. 12, p. 2772.
|
[25] |
Y. Ren, Y. Zhang, and L.F. Zhang, A kinetic model for Ca treatment of Al-killed steels using factsage macro processing, Ironmaking Steelmaking, 44(2017), No. 7, p. 497.
|
[26] |
Y. Liu, L.F. Zhang, Y. Zhang, H.J. Duan, Y. Ren, and W. Yang, Effect of sulfur in steel on transient evolution of inclusions during calcium treatment, Metall. Mater.Trans. B, 49(2018), No. 2, p. 610.
|
[27] |
A. Ray, S.K. Paul, and S. Jha, Effect of inclusions and microstructural characteristics on the mechanical properties and fracture behavior of a high-strength low-alloy steel, J. Mater. Eng. Perform., 4(1995), No. 6, p. 679.
|
[28] |
T. Lis, Modification of oxygen and sulphur snclusions in steel by calcium treatment, Metalurgija, 48(2009), No. 2, p. 95.
|
[29] |
J. Moon, S.J. Kim, and C. Lee, Role of Ca treatment in hydrogen induced cracking of hot rolled API pipeline steel in acid sour media, Met. Mater. Int., 19(2013), No. 1, p. 45.
|
[30] |
L. Holappa, M. Hämäläinen, M. Liukkonen, and M. Lind, Thermodynamic examination of inclusion modification and precipitation from calcium treatment to solidified steel, Ironmaking Steelmaking, 30(2003), No. 2, p. 111.
|
[31] |
Y. Wang, S. Sridhar, and M. Valdez, Formation of CaS on Al2O3-CaO inclusions during solidification of steels, Metall. Mater. Trans. B, 33(2002), No. 4, p. 625.
|
[32] |
J. Guo, S.S Cheng, Z.J. Cheng, and L. Xin, Thermodynamics for precipitation of cas bearing inclusion and their deformation during rolling process for Al-killed Ca-treated steel, Steel Res. Int., 84(2013), No. 6, p. 545.
|
[33] |
Y.Y. Bi, A.V. Karasev, and P.G. Jönsson, Evolution of different inclusions during ladle treatment and continuous casting of stainless steel, ISIJ Int., 53(2013), No. 12, p. 2099.
|
[34] |
C.W. Bale, P. Chartrand, S.A. Degterov, G. Eriksson, K. Hack, R.B. Mahfoud, J. Melançon, A.D. Pelton, and S. Petersen, FactSage thermochemical software and databases, Calphad, 26(2002), No. 2, p. 189.
|
[35] |
S. Sun, S. Waterfall, N. Strobl, D. Liao, and D. Holdridge, Inclusion control with Ca treatment to improve castability of low carbon Aluminum-killed steel,[in] Proceedings of the 8th International Symposium on High-Temperature Metallurgical Processing, San Diego, 2017, p. 347.
|
[36] |
G.R. Belton and R.W. Hunt, How fast can we go? The status of our knowledge of the rates of gas-liquid metal reactions, Metall. Trans. B, 24(1993), No. 2, p. 241.
|
[37] |
S. Ban-Ya, F. Ishii, Y. Iguchi, and T. Nagasaka, Rate of nitrogen desorption from liquid iron-carbon and iron-chromium alloys with argon, Metall. Trans. B, 19(1988), No. 2, p. 233.
|
[38] |
K. Harashima, S. Mizoguchi, H. Kajioka, and K. Sakakura, Kinetics of nitrogen desorption from liquid iron with low nitrogen content under reduced pressures, Tetsu-to-Hagane, 73(1987), No. 11, p. 1559.
|
[39] |
K. Harashima, S. Mizoguchi, M. Matsuo, and A. Kiyose, Rates of nitrogen and carbon removal from liquid iron in low content region under reduced pressures, ISIJ Int., 32(1992), No. 1, p. 111.
|
[40] |
T. Harada and D. Janke, Nitrogen desorption from pure iron melts under reduced pressure, Steel Res. Int., 60(1989), No. 8, p. 337.
|
[41] |
T. Fujisawa, S. Yamauchiand, and H. Sakao, Activities of CaO and Al2O3 in CaO-Al2O3-CaS slags saturated with CaS and the equilibrium between the slags and molten iron alloys at 1873 K,[in] Proceedings of the 6th International Iron and Steel Congress, Tokyo, 1990, p. 201.
|
[42] |
B. Koroušić, Fundamental thermodynamic aspects of the CaO-Al2O3-SiO2 system, Steel Res. Int., 62(1991), No. 7, p. 285.
|
[43] |
X.H. Wang, X.G. Li, Q. Li, F.X. Huang, H.B. Li, and J. Yang, Control of string shaped non-metallic inclusions of CaS-Al2O3 system in X80 pipeline steel plates, Acta Metall. Sin., 49(2013), No. 5, p. 553.
|
[44] |
T.X. Zhu, M. King, and D. Holdridge, Calcium injection optimization at ArcelorMittal Dofasco Inc.'s LMF 2,[in] Proceedings of the AISTech 2018, Philadelphia, 2018, p. 1419.
|