Hao Wang, Yan-ping Bao, Ming Zhao, Min Wang, Xiao-ming Yuan,  and Shuai Gao, Effect of Ce on the cleanliness, microstructure and mechanical properties of high strength low alloy steel Q690E in industrial production process, Int. J. Miner. Metall. Mater., 26(2019), No. 11, pp. 1372-1384. https://doi.org/10.1007/s12613-019-1871-0
Cite this article as:
Hao Wang, Yan-ping Bao, Ming Zhao, Min Wang, Xiao-ming Yuan,  and Shuai Gao, Effect of Ce on the cleanliness, microstructure and mechanical properties of high strength low alloy steel Q690E in industrial production process, Int. J. Miner. Metall. Mater., 26(2019), No. 11, pp. 1372-1384. https://doi.org/10.1007/s12613-019-1871-0
Research Article

Effect of Ce on the cleanliness, microstructure and mechanical properties of high strength low alloy steel Q690E in industrial production process

+ Author Affiliations
  • Corresponding author:

    Yan-ping Bao    E-mail: baoyp@ustb.edu.cn

  • Received: 14 March 2019Revised: 20 May 2019Accepted: 3 June 2019
  • In order to improve the strength and toughness of Q690E steel sheets, the effect of rare earth element Ce on the strength and toughness of Q690E steel was studied by means of transmission electron microscopy, scanning electron microscopy, and metallographic microscope. The results showed that the addition of Ce in steel limited the combination of S with Mn and Ca, transformed Al2O3 inclusion into spherical CeAlO3 inclusion, and modified the precipitate form of some composite inclusions of TiN and sulfide oxides into TiN precipitation alone. The inclusions were spheroidizing. The size of inclusions was decreased from 3-5 μm to 1-2 μm, and the distribution was dispersed. Ce played a role in purifying molten steel through desulphurization and deoxidization. Meanwhile, the addition of Ce in steel effectively increased the nucleation particles in the liquid phase, improved the nucleation rate, enlarged the equiaxed grain refinement area, and limited the development of columnar crystals. The average grain size of slab decreased from 45.76 to 35.25 μm, and the proportion of large grain size (> 50 μm) decreased from 40.41% to 23.74%. The macrostructural examination of slab was improved from B0.5 to C2.0, which realized the refinement of the solidified structure and reduced the banded structure of hot rolled plate. In addition, due to the inheritance of refined structure in the upstream, the recrystallization of deformed austenite and the growth of grain after recrystallization were restrained, and a refined tempered sorbite structure was obtained. When rare earth element Ce was added, the width of the martensite lath bundle was narrowed from about 500 nm to about 200 nm, which realized a remarkable grain refinement strengthening and toughening effect. Mechanical properties such as tensile, yield, and low-temperature impact toughness were significantly improved.
  • loading
  • [1]
    Z.A. Zhou, W.T. Fu, Z. Zhu, B. Li, Z.P. Shi, and S.H. Sun, Excellent mechanical properties and resistance to cavitation erosion for an ultra-low carbon CrMnN stainless steel through quenching and partitioning treatment, Int. J. Miner. Metall. Mater., 25(2018), No. 5, p. 547.
    [2]
    N. Lun, D.C. Saha, A. Macwan, H. Pan, L. Wang, F. Goodwin, and Y. Zhou, Microstructure and mechanical properties of fibre laser welded medium manganese TRIP steel, Mater. Des., 131(2017), p. 450.
    [3]
    W.W. Mao, A.G. Ning, and H.J. Guo, Nanoscale precipitates and comprehensive strengthening mechanism in AISI H13 steel, Int. J. Miner. Metall. Mater., 23(2016), No. 9, p. 1056.
    [4]
    B.B. He, B. Hu, H.W. Yen, G.J. Cheng, Z.K. Wang, H.W. Luo, and M.X. Huang, High dislocation density-induced large ductility in deformed and partitioned steels, Science, 357(2017), No. 6355, p. 1029.
    [5]
    Y.M. Wang, M.W. Chen, F. Zhou, and E. Ma, High tensile ductility in a nanostructured metal, Nature, 419(2002), No. 6910, p. 912.
    [6]
    Y.J. Zhao, X.P. Ren, W.C. Yang, and Y. Zang, Design of a low-alloy high-strength and high-toughness martensitic steel, Int. J. Miner. Metall. Mater., 20(2013), No. 8, p. 733.
    [7]
    B.H. Chen and H. Yu, Hot ductility behavior of V-N and V-Nb microalloyed steels, Int. J. Miner. Metall. Mater., 19(2012), No. 6, p. 525.
    [8]
    S.J. Kim, K.M. Ryu, and M.S Oh, Addition of cerium and yttrium to ferritic steel weld metal to improve hydrogen trapping efficiency, J. Miner. Metall. Mater., 24(2017), No. 4, p. 415.
    [9]
    X. Yu, Z.H. Zhang, and J.X. Xie, Effects of rare earth elements doping on ordered structures and ductility improvement of Fe-6.5wt% Si alloy, Mater. Lett., 184(2016), No. 1, p. 294.
    [10]
    Y.Y. Zhao, J.F. Wang, S. Zhou, and X.D. Wang, Effects of rare earth addition on microstructure and mechanical properties of a Fe-15Mn-1.5Al-0.6C TWIP steel, Mater. Sci. Eng. A, 608(2014), p. 106.
    [11]
    F. Dong, Z.F. Cui, G.H. Shen, and S.L. Guo, Effects of cerium on microstructure and mechanical properties of bulletproof steel, J. Chin. Soc. Rare Earths, 34(2016), No. 3, p. 320.
    [12]
    Q. Lin, F. Guo, and X.Y. Zhu, Behaviors of lanthanum and cerium on grain boundaries in carbon manganese clean steel, J. Rare Earths, 25(2007), No. 4, p. 485.
    [13]
    H. Li, Y.C. Yu, X. Ren, S.H. Zhang, and S.B. Wang, Evolution of Al2O3 inclusions by cerium treatment in low carbon high manganese, J. Iron Steel Res. Int., 24(2017), No. 9, p. 925.
    [14]
    X.H. Yang, P.F. Wu, and C.C. Wu, Behavior of rare earth modifying inclusions in special steel, J. Chin. Soc. Rare Earths, 28(2010), No. 5, p. 612.
    [15]
    J.C. Yang, H.W. Li, L. Zhou, J. Zhang, and N. Liu, Mechanism of trace cerium in ultra-clean IF steel, Iron Steel, 50(2015), No. 11, p. 81.
    [16]
    B. Wen, B. Song, N. Pan, Q.Y. Hu, and J.L. Mao, Effect of austenitizing temperature on microstructure in 16Mn steel treated by cerium, J. Miner. Metall. Mater., 18(2011), No. 6, p. 652.
    [17]
    X.Y. Fu, J.C. Yang, X.Z. Jiang, X.Z. Jiang, L.P. Zhao, and P. Wu, Effects of Ce on the inclusions and impact toughness of T91 heat-resistant steel, Chin. Rare Earths, 36(2015), No. 5, p. 60.
    [18]
    H.W. Li, J.C. Yang, J. Zhang, and L. Zhou, Precipitation behaviors of titaniferous inclusions in cerium-containing IF steel, J. Iron Steel Res., 27(2015), No. 9, p. 49.
    [19]
    L.F. Fan, R. Zhu, J.Z. He, and B. Lu, Effect of rare earth element La on texture and inclusion of non-oriented electrical steel produced by thin slab casting and rolling process, ISIJ Int., 12(2018), No. 58, p. 2348.
    [20]
    C. Gu, Y.P Bao, P. Gan, M. Wang, and J.S He, Effect of main inclusions on crack initiation in bearing steel in the very high cycle fatigue regime, J. Miner. Metall. Mater., 25(2018), No. 6, p. 623.
    [21]
    M. Wang, Y.P. Bao, L.H. Zhao, L. Lin, and Q. Yang, Relationship between the size of inclusions in steel and total oxygen (T.O), Chin. J. Eng., 37(2015), No. Suppl. 1, p. 1.
    [22]
    L. Lin, Y.P. Bao, W. Jiang, and Q.F. Wu, Effect of Na2O on phosphorus enrichment and separation in P-bearing steelmaking slag, ISIJ Int., 55(2015), No. 3, p. 552.
    [23]
    L. Yang and G.G Cheng, Characteristics of Al2O3, MnS, and TiN inclusions in the remelting process of bearing steel, J. Miner. Metall. Mater., 24(2017), No. 8, p. 869.
    [24]
    J.G. Xiao, H.J. Chen, and F.M. Wang, Effects of rare earth in ship hull plate steel on its microstructure and low temperature toughness, Chin. Rare Earths, 31(2010), No. 5, p. 52.
    [25]
    S.C. Chen, H.X. Ye, and X.Q. Lin, Effect of rare earth and alloying elements on the thermal conductivity of austenitic medium manganese steel, J. Miner. Metall. Mater., 24(2017), No. 6, p. 670.
    [26]
    J.C. Yang, X.E. Cao, C.Q. Yang, and J.M. Guo, Effect of Ce on low temperature impact toughness of X80 steel, Chin. Rare Earths, 34(2013), No. 2, p. 1.
    [27]
    J. Xu, G.P. Qi, J.X. Zhu, B. Xu, K. Zhang, and L.M. Wang, Effect of rare earth on solidification structure and formability of 430 ferritic stainless steel shee,[in] 2006 National Conference on Metallurgical Physical Chemistry, Jinan, 2006, p. 486.
    [28]
    Y. Huang, G.G. Cheng, and Y. Xie, Modification mechanism of cerium on the inclusions in drill steel, Acta Metall. Sin., 54(2018), No. 9, p. 1253.
    [29]
    X.P. Wang, A.M. Zhao, Z.Z. Zhao, Y. Huang, L. Li, and Q. He, Mechanical properties and characteristics of nanometer-sized precipitates in hot-rolled low-carbon ferritic steel, J. Miner. Metall. Mater., 21(2014), No. 3, p. 266.
    [30]
    Y.Q. Liu, L.J. Wang, and G.Z. Zhou, Effect of cerium on the cleanliness of spring steel used in fastener of high-speed railway, J. Rare Earths, 32(2014), No. 8, p. 759.
    [31]
    G. Li, M.G. Lu, P. Lan, H.Y. Tang, J.G. Zhi, and J.Q. Zhang, Research progress of rare earth Ce on improvement of microstructure and homogeneity of as-cast steel, J. Iron Steel Res., 30(2018), No. 2, p. 79.
    [32]
    Y.G. Liu, S. Xia, Q. Bai, and B.X. Zhou, Morphological characteristics and size distributions of three-dimensional grains and grain boundaries in 316L stainless steel, Acta Metall. Sin., 54(2018), No. 6, p. 868.
    [33]
    Y. Xiang, Z.G. Chen, X. Wei, and Z.J. Wu, Influence of Ce on microstructure and properties of high-carbon high-boron steel, Rare Metal Mater. Eng., 44(2015), No. 6, p. 1335.
    [34]
    L.H. Wang, D. Tang, A.M. Zhao, and H.T. Jiang, Effects of RE content on microstructure and properties of TRIP/TWIP steels, Trans. Mater. Heat Treat., 37(2016), No. 2, p. 110.
    [35]
    L. Qi, A.M. Zhao, and Z.Z. Zhao, Effect of rare earth La addition on microstructure and properities of Nb-Ti-Mo pipeline steel, Trans. Mater. Heat Treat., 33(2012), No. 12, p. 82.
    [36]
    Z. Adabavazeh, W.S. Hwang, and Y.H. Su, Effect of adding cerium on microstructure and morphology of Ce-based inclusions formed in low-carbon steel, Sci. Rep., 7(2017), art. No. 46503.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Share Article

    Article Metrics

    Article Views(808) PDF Downloads(56) Cited by()
    Proportional views

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return