Yan-ping Bao, Editorial for special issue on USTB–RWTH Aachen’s 40 years of collaboration, Int. J. Miner. Metall. Mater., 28(2021), No. 5, pp. 739-740. https://doi.org/10.1007/s12613-021-2297-z
Cite this article as:
Yan-ping Bao, Editorial for special issue on USTB–RWTH Aachen’s 40 years of collaboration, Int. J. Miner. Metall. Mater., 28(2021), No. 5, pp. 739-740. https://doi.org/10.1007/s12613-021-2297-z
Editorial

Editorial for special issue on USTB–RWTH Aachen’s 40 years of collaboration

+ Author Affiliations
  • Corresponding author:

    Yan-ping Bao    E-mail: baoyp@ustb.edu.cn

  • Available online: 26 April 2021
  • loading
  • [1]
    S.S. Li and H.W. Luo, Medium-Mn steels for hot forming application in the automotive industry, Int. J. Miner. Metall. Mater., 28(2021), No. 5, p. 741. doi: https://doi.org/10.1007/s12613-020-2179-9
    [2]
    L. Wang, C.F. Dong, C. Man, Y.B. Hu, Q. Yu, and X.G. Li, Effect of microstructure on corrosion behavior of ultra-high strength martensite steel—A literature review, Int. J. Miner. Metall. Mater., 28(2021), No. 5, p. 754. doi: https://doi.org/10.1007/s12613-020-2242-6
    [3]
    W. Bleck, New insights into the properties of high manganese steel, Int. J. Miner. Metall. Mater., 28(2021), No. 5, p. 782. doi: https://doi.org/10.1007/s12613-020-2166-1
    [4]
    C.Y. Xu, C.W, R.Z. Xu, J.L. Zhang, and K.X. Jiao, Effect of Al2O3 on the viscosity of CaO–SiO2–Al2O3–MgO–Cr2O3 slags, Int. J. Miner. Metall. Mater., 28(2021), No. 5, p. 797. doi: https://doi.org/10.1007/s12613-020-2187-9
    [5]
    W. Xiao, Y.P. Bao, C. Gu, M. Wang, Y. Liu, Y.S. Huang, and G.T. Sun, Ultrahigh cycle fatigue fracture mechanism of high-quality bearing steel obtained through different deoxidation methods, Int. J. Miner. Metall. Mater., 28(2021), No. 5, p. 804. doi: https://doi.org/10.1007/s12613-021-2253-y
    [6]
    Y.S. Yu, B. Hu, M.L. Gao, Z.J. Xie, X.Q. Rong, G. Han, H. Guo, and C.J. Shang, Determining role of heterogeneous microstructure in lowering yield ratio and enhancing impact toughness in high strength low alloy steel, Int. J. Miner. Metall. Mater., 28(2021), No. 5, p. 816. doi: https://doi.org/10.1007/s12613-020-2235-5
    [7]
    C. Gu, W.Q. Liu, J.H. Lian, and Y.P. Bao, In-depth analysis of the fatigue mechanism induced by inclusions for high-strength bearing steels, Int. J. Miner. Metall. Mater., 28(2021), No. 5, p. 826. doi: https://doi.org/10.1007/s12613-020-2223-9
    [8]
    L.Z. Jin and M.X. Niu, Micromorphology and safety properties of meager and meager-lean coal for blast furnace injection, Int. J. Miner. Metall. Mater., 28(2021), No. 5, p. 774. doi: https://doi.org/10.1007/s12613-020-2104-2
    [9]
    X.F. Guo, S. Zaefferer, F. Archie, and W. Bleck, Hydrogen effect on the mechanical behaviour and microstructural features of a Fe–Mn–C twinning induced plasticity steel, Int. J. Miner. Metall., 28(2021), No. 5, p. 835. doi: https://doi.org/10.1007/s12613-021-2284-4
    [10]
    Y. Ma, R. Zheng, Z.Y. Gao, U. Krupp, H.W. Luo, W.W. Song, and W. Bleck, Multiphase-field simulation of austenite reversion in medium-Mn steels, Int. J. Miner. Metall., 28(2021), No. 5, p. 847. doi: https://doi.org/10.1007/s12613-021-2282-6
    [11]
    W.Q. Liu and J.H. Lian, Stress state dependence of dynamic strain aging: Thermal hardening and blue brittleness, Int. J. Miner. Metall., 28(2021), No. 5, p. 854. doi: https://doi.org/10.1007/s12613-021-2250-1
    [12]
    N. Hytönen, Z.Q. Que, P. Arffman, J. Lydman, P. Nevasmaa, U. Ehrnstén, and P. Efsing, Effect of weld microstructure on brittle fracture initiation in the thermally aged boiling water reactor pressure vessel head weld metal, Int. J. Miner. Metall. Mater., 28(2021), No. 5, p. 867. doi: https://doi.org/10.1007/s12613-020-2226-6
    [13]
    J.-L. Zhang and Stefan Zaefferer, Influence of sample preparation on nanoindentation results of twinning-induced plasticity steel, Int. J. Miner. Metall., 28(2021), No. 5, p. 877. doi: https://doi.org/10.1007/s12613-021-2260-z
    [14]
    W.R. Wang, W. Qi, X.L. Zhang, X. Yang, L. Xie, D.Y. Li, and Y.H. Xiang, Superior corrosion resistance dependent laser energy density in (CoCrFeNi)95Nb5 high entropy alloy coating fabricated by laser cladding, Int. J. Miner. Metall. Mater., 28(2021), No. 5, p. 888. doi: https://doi.org/10.1007/s12613-020-2238-2
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Share Article

    Article Metrics

    Article views (225) PDF downloads(27) Cited by()
    Proportional views

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return