Outlier screening for ironmaking data on blast furnaces

Jun Zhao; Shao-fei Chen; Xiao-jie Liu; Xin Li; Hong-yang Li; Qing Lyu

doi:10.1007/s12613-021-2301-7

Volume 28 Issue 6

Jun. 2021

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2021 > 28(6): 1001-1010

Jun Zhao, Shao-fei Chen, Xiao-jie Liu, Xin Li, Hong-yang Li, and Qing Lyu, Outlier screening for ironmaking data on blast furnaces, Int. J. Miner. Metall. Mater., 28(2021), No. 6, pp. 1001-1010. https://doi.org/10.1007/s12613-021-2301-7

Cite this article as:

Jun Zhao, Shao-fei Chen, Xiao-jie Liu, Xin Li, Hong-yang Li, and Qing Lyu, Outlier screening for ironmaking data on blast furnaces, Int. J. Miner. Metall. Mater., 28(2021), No. 6, pp. 1001-1010. https://doi.org/10.1007/s12613-021-2301-7

Citation:

PDF( 1634 KB)

Research Article

Outlier screening for ironmaking data on blast furnaces

+ Author Affiliations

Corresponding author:
Xiao-jie Liu E-mail: xiaojie19851003@163.com
Received: 5 February 2021; Revised: 30 April 2021; Accepted: 7 May 2021; Available online: 8 May 2021

Abstract

Abstract

Blast furnace data processing is prone to problems such as outliers. To overcome these problems and identify an improved method for processing blast furnace data, we conducted an in-depth study of blast furnace data. Based on data samples from selected iron and steel companies, data types were classified according to different characteristics; then, appropriate methods were selected to process them in order to solve the deficiencies and outliers of the original blast furnace data. Linear interpolation was used to fill in the divided continuation data, the K-nearest neighbor (KNN) algorithm was used to fill in correlation data with the internal law, and periodic statistical data were filled by the average. The error rate in the filling was low, and the fitting degree was over 85%. For the screening of outliers, corresponding indicator parameters were added according to the continuity, relevance, and periodicity of different data. Also, a variety of algorithms were used for processing. Through the analysis of screening results, a large amount of efficient information in the data was retained, and ineffective outliers were eliminated. Standardized processing of blast furnace big data as the basis of applied research on blast furnace big data can serve as an important means to improve data quality and retain data value.
- blast furnace;
- data missing;
- outliers;
- data processing;
- data mining

FullText(HTML)

Supplements(0)

References(15)

References

[1]	X.F. Yan and D.X. Zhang, Big data research, Comput. Technol. Dev., 23(2013), No. 4, p. 168.
[2]	X.P. Ma, Y.J. Hu, and Y.Z. Miao, Application research of technologies of Internet of Things, big data and cloud computing in coal mine safety production, Ind. Mine Autom., 40(2014), No. 4, p. 5.
[3]	J.G. Ma and W. Jiang, The concept, characteristics and application of big data, Natl. Def. Sci. Technol., 34(2013), No. 2, p. 10.
[4]	J.Y. Wang, Z.X. Ji, M.J. Shi, F.P. Huang, C.Y. Zhu, and D.X. Zhang, Scenario analysis and application research on big data in smart power distribution and consumption systems, Proc. Chin. Soc. Electr. Eng., 35(2015), No. 8, p. 1829.
[5]	D.X. Zhang, X. Miao, L.P. Liu, Y. Zhang, and K.Y. Liu, Research on development strategy for smart grid big data, Proc. CSEE., 35(2015), No. 1, p. 2.
[6]	X.Q. Cheng, X.L. Jin, Y.Z. Wang, J.F. Guo, T.Y. Zhang, and G.J. Li, Survey on big data system and analytic technology, J. Software, 25(2014), No. 9, p. 1889.
[7]	Z.H. Liu and Q.L. Zhang, Research overview of big data technology, J. Zhejiang Univ. Eng. Sci., 48(2014), No. 6, p. 957.
[8]	Y.Q. Song, G.L. Zhou, and Y.L. Zhu, Present status and challenges of big data processing in smart grid, Power Syst. Technol., 37(2013), No. 4, p. 927.
[9]	L. Ma, Z.H. Dong, S. Xia, and R. Jia, Analysis of data mining technology, Digit. Technol. Appl., 37(2019), No. 10, p. 230.
[10]	Y. Fang, Data mining analysis based on cloud computing and internet of things technology, Adhesion, 45(2021), No. 1, p. 163.
[11]	X.J. Liu, X. Li, E.H. Liu, S. Liu, and Q. Lyu, Research status and prospect of big data technology in blast furnace ironmaking production, Multipurpose Util. Miner. Resour., 2020 [2021-5-10]. https://kns.cnki.net/kcms/detail/51.1251.TD.20200622.0938.024.html
[12]	S. Liu, F.L. Liu, E.H. Liu, Q. Lü, Q. Shi, and X.J. Liu, Optimization of blast furnace parameters based on big data technology and process experience, Iron Steel, 54(2019), No. 11, p. 16.
[13]	R. Liu, The Preprocessing Method of Process Industry Production Data [Dissertation], Zhejiang University, Hangzhou, 2019, p. 3.
[14]	F. Abdul, S. Pintowantoro, and A. Maulidani, Analysis the effect of charcoal mass variation to Ni content, sinter strength and yield on sintering process of limonitic laterite nickel ore, Key Eng. Mater., 867(2020), p. 25. doi: 10.4028/www.scientific.net/KEM.867.25
[15]	A. Qi, X.H. Liu, Z.W. Wang, and Z.X. Chen, Mechanical properties of the concrete containing ferronickel slag and blast furnace slag powder, Constr. Build. Mater., 231(2020), art. No. 117120. doi: 10.1016/j.conbuildmat.2019.117120