Enhancing the mechanical properties of casting eutectic high-entropy alloys via W addition

Xu Yang; Dezhi Chen; Li Feng; Gang Qin; Shiping Wu; Ruirun Chen

doi:10.1007/s12613-024-2892-x

Volume 31 Issue 6

Jun. 2024

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2024 > 31(6): 1364-1372

Xu Yang, Dezhi Chen, Li Feng, Gang Qin, Shiping Wu, and Ruirun Chen, Enhancing the mechanical properties of casting eutectic high-entropy alloys via W addition, Int. J. Miner. Metall. Mater., 31(2024), No. 6, pp. 1364-1372. https://doi.org/10.1007/s12613-024-2892-x

Cite this article as:

Xu Yang, Dezhi Chen, Li Feng, Gang Qin, Shiping Wu, and Ruirun Chen, Enhancing the mechanical properties of casting eutectic high-entropy alloys via W addition, Int. J. Miner. Metall. Mater., 31(2024), No. 6, pp. 1364-1372. https://doi.org/10.1007/s12613-024-2892-x

Citation:

PDF( 3586 KB)

Research Article

Enhancing the mechanical properties of casting eutectic high-entropy alloys via W addition

+ Author Affiliations

Corresponding authors:
Dezhi Chen E-mail: chendezhi383@163.com

Ruirun Chen E-mail: ruirunchen@hit.edu.cn
Received: 20 December 2023; Revised: 28 February 2024; Accepted: 22 March 2024; Available online: 23 March 2024

Abstract

Abstract

The effect of W element on the microstructure evolution and mechanical properties of Al_1.25CoCrFeNi₃ eutectic high-entropy alloy and Al_1.25CoCrFeNi_3−xW_x (x = 0, 0.05, 0.1, 0.3, and 0.5; atomic ratio) high-entropy alloys (HEAs) were explored. Results show that the Al_1.25CoCrFeNi_3−xW_x HEAs are composed of face-centered cubic and body-centered cubic (BCC) phases. As W content increases, the microstructure changes from eutectic to dendritic. The addition of W lowers the nucleation barrier of the BCC phase, decreases the valence electron concentration of the HEAs, and replaces Al in the BCC phase, thus facilitating the nucleation of the BCC phase. Tensile results show that the addition of W greatly improves the mechanical properties, and solid-solution, heterogeneous-interface, and second-phase strengthening are the main strengthening mechanisms. The yield strength, tensile strength, and elongation of the Al_1.25CoCrFeNi_2.95W_0.05 HEA are 601.44 MPa, 1132.26 MPa, and 15.94%, respectively, realizing a balance between strength and plasticity. The fracture mode of the Al_1.25CoCrFeNi_3−xW_x HEAs is ductile–brittle mixed fracture, and the crack propagates and initiates in the BCC phase. The eutectic lamellar structure impedes crack propagation and maintains plasticity.
- high-entropy alloy;
- microstructure;
- mechanical property;
- fracture behavior

FullText(HTML)

Supplements(0)

References(55)

References

[1]	S.T. Zhang, X. Ding, X.F. Gao, et al., Dual enhancement in strength and ductility of Ti–V–Zr medium entropy alloy by fracture mode transformation via a heterogeneous structure, Int. J. Plast., 160(2023), art. No. 103505. doi: 10.1016/j.ijplas.2022.103505
[2]	J.H. Liu, X.M. Zhao, S.M. Zhang, Y.W. Sheng, and Q. Hu, Microstructure and mechanical properties of MoNbTaW refractory high-entropy alloy prepared by spark plasma sintering, J. Mater. Res., 38(2023), No. 2, p. 484. doi: 10.1557/s43578-022-00833-6
[3]	H. Ren, R.R. Chen, T. Liu, et al., Unraveling the oxidation mechanism of Y-doped AlCoCrFeNi high-entropy alloy at 1100°C, Appl. Surf. Sci., 652(2024), art. No. 159316. doi: 10.1016/j.apsusc.2024.159316
[4]	Y.S. Li, W.B. Liao, H.C. Chen, et al., A low-density high-entropy dual-phase alloy with hierarchical structure and exceptional specific yield strength, Sci. China Mater., 66(2023), No. 2, p. 780. doi: 10.1007/s40843-022-2178-x
[5]	Z. Cheng, S.Z. Wang, G.L. Wu, J.H. Gao, X.S. Yang, and H.H. Wu, Tribological properties of high-entropy alloys: A review, Int. J. Miner. Metall. Mater., 29(2022), No. 3, p. 389. doi: 10.1007/s12613-021-2373-4
[6]	I. Basu and J.Th.M. de Hosson, Strengthening mechanisms in high entropy alloys: Fundamental issues, Scripta Mater., 187(2020), p. 148. doi: 10.1016/j.scriptamat.2020.06.019
[7]	D.B. Miracle and O.N. Senkov, A critical review of high entropy alloys and related concepts, Acta Mater., 122(2017), p. 448. doi: 10.1016/j.actamat.2016.08.081
[8]	J. Wu, H.G. Zhu, and Z.H. Xie, Strength and ductility synergy of Nb-alloyed Ni_0.6CoFe_1.4 alloys, Int. J. Miner. Metall. Mater., 30(2023), No. 4, p.707. doi: 10.1007/s12613-022-2567-4
[9]	B. Gludovatz, A. Hohenwarter, D. Catoor, E.H. Chang, E.P. George, and R.O. Ritchie, A fracture-resistant high-entropy alloy for cryogenic applications, Science, 345(2014), No. 6201, p. 1153. doi: 10.1126/science.1254581
[10]	L. Fan, T. Yang, Y.L. Zhao, et al., Ultrahigh strength and ductility in newly developed materials with coherent nanolamellar architectures, Nat. Commun., 11(2020), No. 1, art. No. 6240. doi: 10.1038/s41467-020-20109-z
[11]	O.N. Senkov, S. Gorsse, and D.B. Miracle, High temperature strength of refractory complex concentrated alloys, Acta Mater., 175(2019), p. 394. doi: 10.1016/j.actamat.2019.06.032
[12]	C. Lee, G. Kim, Y. Chou, et al., Temperature dependence of elastic and plastic deformation behavior of a refractory high-entropy alloy, Sci. Adv., 6(2020), No. 37, art. No. eaaz4748. doi: 10.1126/sciadv.aaz4748
[13]	N. Xiao, X. Guan, D. Wang, et al., Impact of W alloying on microstructure, mechanical property and corrosion resistance of face-centered cubic high entropy alloys: A review, Int. J. Miner. Metall. Mater., 30(2023), No. 9, p. 1667 doi: 10.1007/s12613-023-2641-6
[14]	Y.C. Wu and J.L. Shao, FCC–BCC phase transformation induced simultaneous enhancement of tensile strength and ductility at high strain rate in high-entropy alloy, Int. J. Plast., 169(2023), art. No. 103730. doi: 10.1016/j.ijplas.2023.103730
[15]	L.L. Han, X.D. Xu, Z.M. Li, B. Liu, C.T. Liu, and Y. Liu, A novel equiaxed eutectic high-entropy alloy with excellent mechanical properties at elevated temperatures, Mater. Res. Lett., 8(2020), No. 10, p. 373. doi: 10.1080/21663831.2020.1772395
[16]	J. Ren, M. Wu, C.Y. Li, et al., Deformation mechanisms in an additively manufactured dual-phase eutectic high-entropy alloy, Acta Mater., 257(2023), art. No. 119179. doi: 10.1016/j.actamat.2023.119179
[17]	Y.P. Lu, Y. Dong, S. Guo, et al., A promising new class of high-temperature alloys: Eutectic high-entropy alloys, Sci. Rep., 4(2014), art. No. 6200. doi: 10.1038/srep06200
[18]	J.W. Miao, H.W. Yao, J. Wang, Y.P. Lu, T.M. Wang, and T.J. Li, Surface modification for AlCoCrFeNi_2.1 eutectic high-entropy alloy via laser remelting technology and subsequent aging heat treatment, J. Alloys Compd., 894(2022), art. No. 162380. doi: 10.1016/j.jallcom.2021.162380
[19]	T. Xiong, W.F. Yang, S.J. Zheng, et al., Faceted Kurdjumov-Sachs interface-induced slip continuity in the eutectic high-entropy alloy, AlCoCrFeNi_2.1, J. Mater. Sci. Technol., 65(2021), p. 216. doi: 10.1016/j.jmst.2020.04.073
[20]	J.J. Shen, J.G. Lopes, Z. Zeng, et al., Deformation behavior and strengthening effects of an eutectic AlCoCrFeNi_2.1 high entropy alloy probed by in situ synchrotron X-ray diffraction and post-mortem EBSD, Mater. Sci. Eng. A, 872(2023), art. No. 144946. doi: 10.1016/j.msea.2023.144946
[21]	X.T. Duan, T.Z. Han, X. Guan, et al., Cooperative effect of Cr and Al elements on passivation enhancement of eutectic high-entropy alloy AlCoCrFeNi_2.1 with precipitates, J. Mater. Sci. Technol., 136(2023), p. 97. doi: 10.1016/j.jmst.2022.07.023
[22]	X. Wang, W. Zhai, J.Y. Wang, and B. Wei, Strength and ductility enhancement of high-entropy FeCoNi₂Al_0.9 alloy by ultrasonically refining eutectic structures, Scripta Mater., 225(2023), art. No. 115154. doi: 10.1016/j.scriptamat.2022.115154
[23]	Z.Z. Mao, X. Jin, Z. Xue, M. Zhang, and J.W. Qiao, Understanding the yield strength difference in dual-phase eutectic high-entropy alloys, Mater. Sci. Eng. A, 867(2023), art. No. 144725. doi: 10.1016/j.msea.2023.144725
[24]	D. Yun, H. Chae, T. Lee, et al., Stress contribution of B2 phase in Al_0.7CoCrFeNi eutectic high entropy alloy, J. Alloys Compd., 918(2022), art. No. 165673. doi: 10.1016/j.jallcom.2022.165673
[25]	Q.Q. Liu, X.S. Liu, X.F. Fan, et al., Designing novel AlCoCrNi eutectic high entropy alloys, J. Alloys Compd., 904(2022), art. No. 163775. doi: 10.1016/j.jallcom.2022.163775
[26]	C. Liu, Y. Gao, K. Chong, F.Q. Guo, D.T. Wu, and Y. Zou, Effect of Nb content on the microstructure and corrosion resistance of FeCoCrNiNb_x high-entropy alloys in chloride ion environment, J. Alloys Compd., 935(2023), art. No. 168013. doi: 10.1016/j.jallcom.2022.168013
[27]	D. Fang, X. Wu, W.Q. Xu, et al., Microstructure and properties of a novel cost-effective FeNi-based eutectic high entropy alloys, Mater. Sci. Eng. A, 870(2023), art. No. 144919. doi: 10.1016/j.msea.2023.144919
[28]	X.C. Ye, J.Y. Xiong, X. Wu, et al., A new infinite solid solution strategy to design eutectic high entropy alloys with B2 and BCC structure, Scripta Mater., 199(2021), art. No. 113886. doi: 10.1016/j.scriptamat.2021.113886
[29]	L. Wang, C. Yao, J. Shen, et al., A new method to design eutectic high-entropy alloys by determining the formation of single-phase solid solution and calculating solidification paths, Mater. Sci. Eng. A, 830(2022), art. No. 142325. doi: 10.1016/j.msea.2021.142325
[30]	L. Wang, Y.N. Su, C.L. Yao, et al., Microstructure and mechanical property of novel NiAl-based hypoeutectic/eutectic/hypereutectic high-entropy alloy, Intermetallics, 143(2022), art. No. 107476. doi: 10.1016/j.intermet.2022.107476
[31]	Z.S. Yang, Z.J. Wang, Q.F. Wu, et al., Enhancing the mechanical properties of casting eutectic high entropy alloys with Mo addition, Appl. Phys. A, 125(2019), No. 3, art. No. 208. doi: 10.1007/s00339-019-2506-z
[32]	X.H. Chen, W.Y. Xie, J. Zhu, et al., Influences of Ti additions on the microstructure and tensile properties of AlCoCrFeNi_2.1 eutectic high entropy alloy, Intermetallics, 128(2021), art. No. 107024. doi: 10.1016/j.intermet.2020.107024
[33]	Q.F. Wu, Z.J. Wang, T. Zheng, et al., A casting eutectic high entropy alloy with superior strength-ductility combination, Mater. Lett., 253(2019), p. 268. doi: 10.1016/j.matlet.2019.06.067
[34]	Q.F. Wu, F. He, J.J. Li, H.S. Kim, Z.J. Wang, and J.C. Wang, Phase-selective recrystallization makes eutectic high-entropy alloys ultra-ductile, Nat. Commun., 13(2022), No. 1, art. No. 4697. doi: 10.1038/s41467-022-32444-4
[35]	Y. Dong and Y.P. Lu, Effects of tungsten addition on the microstructure and mechanical properties of near-eutectic AlCoCrFeNi₂ high-entropy alloy, J. Mater. Eng. Perform., 27(2018), No. 1, p. 109. doi: 10.1007/s11665-017-3096-6
[36]	N. Malatji, T. Lengopeng, S. Pityana, and A.P.I. Popoola, Microstructural, mechanical and electrochemical properties of AlCrFeCuNiW_x high entropy alloys, J. Mater. Res. Technol., 11(2021), p. 1594. doi: 10.1016/j.jmrt.2021.01.103
[37]	X. Yang, L. Feng, T. Liu, R.R. Chen, G. Qin, and S.P. Wu, Tensile properties and strengthening mechanisms of eutectic high-entropy alloys induced by heterostructure, Mater. Charact., 208(2024), art. No. 113464. doi: 10.1016/j.matchar.2023.113464
[38]	A. Takeuchi and A. Inoue, Quantitative evaluation of critical cooling rate for metallic glasses, Mater. Sci. Eng. A, 304-306(2001), p. 446. doi: 10.1016/S0921-5093(00)01446-5
[39]	V. Soni, O.N. Senkov, B. Gwalani, D.B. Miracle, and R. Banerjee, Microstructural design for improving ductility of an initially brittle refractory high entropy alloy, Sci. Rep., 8(2018), No. 1, art. No. 8816. doi: 10.1038/s41598-018-27144-3
[40]	K.S. Ming, X.F. Bi, and J. Wang, Strength and ductility of CrFeCoNiMo alloy with hierarchical microstructures, Int. J. Plast., 113(2019), p. 255. doi: 10.1016/j.ijplas.2018.10.005
[41]	R.R. Chen, G. Qin, H.T. Zheng, et al., Composition design of high entropy alloys using the valence electron concentration to balance strength and ductility, Acta Mater., 144(2018), p. 129. doi: 10.1016/j.actamat.2017.10.058
[42]	S. Guo, C. Ng, J. Lu, and C.T. Liu, Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys, J. Appl. Phys., 109(2011), No. 10, p. 103505. doi: 10.1063/1.3587228
[43]	H. Jiang, L. Jiang, K.M. Han, et al., Effects of tungsten on microstructure and mechanical properties of CrFeNiV_0.5W_x and CrFeNi₂V_0.5W_xhigh-entropy alloys, J. Mater. Eng. Perform., 24(2015), No. 12, p. 4594. doi: 10.1007/s11665-015-1767-8
[44]	B. Chanda, G. Potnis, P.P. Jana, and J. Das, A review on nano-/ ultrafine advanced eutectic alloys, J. Alloys Compd., 827(2020), art. No. 154226. doi: 10.1016/j.jallcom.2020.154226
[45]	X. Jin, J. Bi, L. Zhang, et al., A new CrFeNi₂Al eutectic high entropy alloy system with excellent mechanical properties, J. Alloys Compd., 770(2019), p. 655. doi: 10.1016/j.jallcom.2018.08.176
[46]	X. Jin, Y. Zhou, L. Zhang, X.Y. Du, and B.S. Li, A new pseudo binary strategy to design eutectic high entropy alloys using mixing enthalpy and valence electron concentration, Mater. Des., 143(2018), p. 49. doi: 10.1016/j.matdes.2018.01.057
[47]	L.L. Ma, J.N. Wang, Z.H. Lai, Z.C. Wu, B.T. Yang, and P.P. Zhao, Microstructure and mechanical property of Al_{56− x}Co₂₄Cr₂₀Ni eutectic high-entropy alloys with an ordered FCC/BCT phase structure, J. Alloys Compd., 936(2023), art. No. 168194. doi: 10.1016/j.jallcom.2022.168194
[48]	X. Jin, Y.X. Liang, J. Bi, and B.S. Li, Enhanced strength and ductility of Al_0.9CoCrNi_2.1 eutectic high entropy alloy by thermomechanical processing, Materialia, 10(2020), art. No. 100639. doi: 10.1016/j.mtla.2020.100639
[49]	Q.W. Tian, G.J. Zhang, K.X. Yin, W.L. Cheng, Y.N. Wang, and J.C. Huang, Effect of Ni content on the phase formation, tensile properties and deformation mechanisms of the Ni-rich AlCoCrFeNi_x (x = 2, 3, 4) high entropy alloys, Mater. Charact., 176(2021), art. No. 111148. doi: 10.1016/j.matchar.2021.111148
[50]	X.X. Liu, S.G. Ma, W.D. Song, D. Zhao, and Z.H. Wang, Microstructure evolution and mechanical response of Co-free Ni₂CrFeAl_0.3Ti_x high-entropy alloys, J. Alloys Compd., 931(2023), art. No. 167523. doi: 10.1016/j.jallcom.2022.167523
[51]	I. Basu, V. Ocelík, and J.Th.M. de Hosson, BCC–FCC interfacial effects on plasticity and strengthening mechanisms in high entropy alloys, Acta Mater., 157(2018), p. 83. doi: 10.1016/j.actamat.2018.07.031
[52]	C.X. Huang, Y.F. Wang, X.L. Ma, et al., Interface affected zone for optimal strength and ductility in heterogeneous laminate, Mater. Today, 21(2018), No. 7, p. 713. doi: 10.1016/j.mattod.2018.03.006
[53]	Y.T. Zhu and X.L. Wu, Perspective on hetero-deformation induced (HDI) hardening and back stress, Mater. Res. Lett., 7(2019), No. 10, p. 393. doi: 10.1080/21663831.2019.1616331
[54]	P.J. Shi, Y.B. Zhong, Y. Li, et al., Multistage work hardening assisted by multi-type twinning in ultrafine-grained heterostructural eutectic high-entropy alloys, Mater. Today, 41(2020), p. 62. doi: 10.1016/j.mattod.2020.09.029
[55]	D.H. Chung, J. Lee, Q.F. He, et al., Hetero-deformation promoted strengthening and toughening in BCC rich eutectic and near eutectic high entropy alloys, J. Mater. Sci. Technol., 146(2023), p. 1. doi: 10.1016/j.jmst.2022.10.036