[1] | Chong-yu Liu, Guang-biao Teng, Zong-yi Ma, Li-li Wei, Bing Zhang, Yong Chen. Effects of Sc and Zr microalloying on the microstructure and mechanical properties of high Cu content 7xxx Al alloy[J]. International Journal of Minerals, Metallurgy and Materials, 2019, 26(12): 1559-1569. doi: 10.1007/s12613-019-1840-7 |
[2] | Xiao-ping Ren, Zhan-qiang Liu. Microstructure refinement and work hardening in a machined surface layer induced by turning Inconel 718 super alloy[J]. International Journal of Minerals, Metallurgy and Materials, 2018, 25(8): 937-949. doi: 10.1007/s12613-018-1643-2 |
[3] | Li-zi He, Yi-heng Cao, Yi-zhou Zhou, Jian-zhong Cui. Effects of Ag addition on the microstructures and properties of Al-Mg-Si-Cu alloys[J]. International Journal of Minerals, Metallurgy and Materials, 2018, 25(1): 62-72. doi: 10.1007/s12613-018-1547-1 |
[4] | Bo-lin He, Lei Xiong, Ming-ming Jiang, Ying-xia Yu, Li Li. Surface grain refinement mechanism of SMA490BW steel cross joints by ultrasonic impact treatment[J]. International Journal of Minerals, Metallurgy and Materials, 2017, 24(4): 410-414. doi: 10.1007/s12613-017-1421-6 |
[5] | Zhi-kai Zheng, Wei-min Mao, Zhi-yong Liu, Dong Wang, Rui Yue. Refinement of primary Si grains in Al–20%Si alloy slurry through serpentine channel pouring process[J]. International Journal of Minerals, Metallurgy and Materials, 2016, 23(5): 572-580. doi: 10.1007/s12613-016-1268-2 |
[6] | Jia-hua Liu, Lei Wang, Yang Liu, Xiu Song, Jiong Luo, Dan Yuan. Effects of H content on the tensile properties and fracture behavior of SA508-III steel[J]. International Journal of Minerals, Metallurgy and Materials, 2015, 22(8): 820-828. doi: 10.1007/s12613-015-1139-2 |
[7] | Yong-kang Liu, Hai-you Huang, Jian-xin Xie. Effect of compression direction on the dynamic recrystallization behavior of continuous columnar-grained CuNi10Fe1Mn alloy[J]. International Journal of Minerals, Metallurgy and Materials, 2015, 22(8): 851-859. doi: 10.1007/s12613-015-1142-7 |
[8] | Tao Lu, Ye Pan, Ji-li Wu, Shi-wen Tao, Yu Chen. Effects of La addition on the microstructure and tensile properties of Al-Si-Cu-Mg casting alloys[J]. International Journal of Minerals, Metallurgy and Materials, 2015, 22(4): 405-410. doi: 10.1007/s12613-015-1086-y |
[9] | Pei Li, Jun Li, Qing-ge Meng, Wen-bin Hu, Chun-fu Kuang. Influence of rapid heating process on the microstructure and tensile properties of high-strength ferrite–martensite dual-phase steel[J]. International Journal of Minerals, Metallurgy and Materials, 2015, 22(9): 933-941. doi: 10.1007/s12613-015-1152-5 |
[10] | Amir Momeni, Shahab Kazemi, Golam Ebrahimi, Alireza Maldar. Dynamic recrystallization and precipitation in high manganese austenitic stainless steel during hot compression[J]. International Journal of Minerals, Metallurgy and Materials, 2014, 21(1): 36-45. doi: 10.1007/s12613-014-0862-4 |
[11] | Dan Wang, Jun Shen, Lin-zhi Wang. Effects of the types of overlap on the mechanical properties of FSSW welded AZ series magnesium alloy joints[J]. International Journal of Minerals, Metallurgy and Materials, 2012, 19(3): 231-235. doi: 10.1007/s12613-012-0543-0 |
[12] | Amir Hassani, Khalil Ranjbar, Sattar Sami. Microstructural evolution and intermetallic formation in Al-8wt% Si-0.8wt% Fe alloy due to grain refiner and modifier additions[J]. International Journal of Minerals, Metallurgy and Materials, 2012, 19(8): 739-746. doi: 10.1007/s12613-012-0621-3 |
[13] | Yong-nan Chen, Jian-feng Wei, Yong-qing Zhao. Grain boundary characteristics and tensile properties of Ti14 alloy after semi-solid deformation[J]. International Journal of Minerals, Metallurgy and Materials, 2011, 18(5): 576-581. doi: 10.1007/s12613-011-0480-3 |
[14] | Ran Wei, Cheng-jia Shang, Kai-ming Wu. Grain refinement in the coarse-grained region of the heat-affected zone in low-carbon high-strength microalloyed steels[J]. International Journal of Minerals, Metallurgy and Materials, 2010, 17(6): 737-741. doi: 10.1007/s12613-010-0382-9 |
[15] | Tao Niu, Yong-lin Kang, Hong-wei Gu, Yu-qun Yin, Ming-liang Qiao, Jin-xing Jiang. Effect of Nb on the dynamic recrystallization behavior of high-grade pipeline steels[J]. International Journal of Minerals, Metallurgy and Materials, 2010, 17(6): 742-747. doi: 10.1007/s12613-010-0383-8 |
[16] | Qingjun Chen, Yonglin Kang, Hao Yu, Chunmei Wang, Chengxiang Li. Research on microstructural evolution and dynamic recrystailization behavior of JB800 bainitic steel by FEM[J]. International Journal of Minerals, Metallurgy and Materials, 2008, 15(3): 250-254. doi: 10.1016/S1005-8850(08)60047-X |
[17] | Ling Zhang, Wangyue Yang, Zuqing Sun. Modeling of microstructural evolution during dynamic recrystallization in coarse Nb microalloyed austenite[J]. International Journal of Minerals, Metallurgy and Materials, 2007, 14(2): 130-135. doi: 10.1016/S1005-8850(07)60026-7 |
[18] | Xiangdong Huo, Delu Liu, Yuanli Wang, Nanjing Chen, Yonglin Kang, Jie Fu. Grain refinement of low carbon steel produced by CSP process[J]. International Journal of Minerals, Metallurgy and Materials, 2004, 11(2): 133-137. |
[19] | Xigui Song, Xiufang Bian, Xiaogang Qi, Xiangfa Liu, Junyan Zhang, Baopei Wang, Limin Zhu. Effect of AlP master alloy on grain refinement of primary silicon in eutectic Al-Si alloys[J]. International Journal of Minerals, Metallurgy and Materials, 2004, 11(1): 81-84. |
[20] | Junpin Lin, Yanli Wang, Zhi Lin, Guoliang Chen. Dynamic recrystallization during hot torsion of Al-4Mg alloy[J]. International Journal of Minerals, Metallurgy and Materials, 2003, 10(2): 45-48. |