Research on flow stress in ferrite deformation of a Ti-IF steel

Guang Xu; Chushao Xu; Jiarong Zhao; Xianjun Liu

doi:10.1016/S1005-8850(06)60010-8

Volume 13 Issue 1

Feb. 2006

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2006 > 13(1): 34-36

Guang Xu, Chushao Xu, Jiarong Zhao, and Xianjun Liu, Research on flow stress in ferrite deformation of a Ti-IF steel, J. Univ. Sci. Technol. Beijing, 13(2006), No. 1, pp. 34-36. https://doi.org/10.1016/S1005-8850(06)60010-8

Cite this article as:

Guang Xu, Chushao Xu, Jiarong Zhao, and Xianjun Liu, Research on flow stress in ferrite deformation of a Ti-IF steel, J. Univ. Sci. Technol. Beijing, 13(2006), No. 1, pp. 34-36. https://doi.org/10.1016/S1005-8850(06)60010-8

Citation:

PDF( 272 KB)

Materials

Research on flow stress in ferrite deformation of a Ti-IF steel

+ Author Affiliations

Corresponding author:
Guang Xu E-mail: xuguang@mail.wust.edu.cn
Received: 8 April 2005

Abstract

Abstract

The experiments of the ferrite warm deformation of ultra-low carbon (ULC) Ti-IF steel were carried out on a hot simulator and the influences of deformation temperature, strain, and strain rate on the flow stress were analyzed. New flow stress models suitable to ferrite warm forming of Ti-IF steel were given on the basis of analyzing the influence of deformation technology parameters on the flow stress.
- ULC Ti-IF steel;
- ferrite deformation;
- flow stress;
- model