Analysis on the deformation and fracture behavior of carbon steel by in situ tensile test

Fan Li; Haibo Huang

doi:10.1016/S1005-8850(06)60102-3

Volume 13 Issue 6

Dec. 2006

Turn off MathJax

Article Contents

Abstract

International Journal of Minerals, Metallurgy and Materials > 2006 > 13(6): 504-507. > DOI: 10.1016/S1005-8850(06)60102-3

Fan Li, and Haibo Huang, Analysis on the deformation and fracture behavior of carbon steel by in situ tensile test, J. Univ. Sci. Technol. Beijing , 13(2006), No. 6, pp.504-507. https://dx.doi.org/10.1016/S1005-8850(06)60102-3

Cite this article as:

PDF (246 KB)

Materials

Analysis on the deformation and fracture behavior of carbon steel by in situ tensile test

Fan Li^, and
Haibo Huang

Author Affilications

College of Material Science and Engineering, Southeast University, Nanjing 210096, China

Received: 04 January 2006;

Graphical Abstract

Abstract

Abstract

The deformation and fracture behaviors of low-carbon steel, medium-carbon steel, and high-carbon steel were studied on internal microstructure using the scanning electron microscopy in situ tensile test. The microstructure mechanism of their deformation and fracture behavior was analyzed. The results show that the deformation and fracture behavior of low-carbon steel depends on the grain size of ferrite, the deformation and fracture behavior of medium-carbon steel depends on the size of ferrite grain and pearlite lump,and the deformation and fracture behavior of high-carbon steel depends on the size of pearlite lump and the pearlitic interlamellar spacing.
- carbon steel,
- deformation,
- fracture,
- microstructure mechanism,
- in situ tensile test

FullText(HTML)

References (0)

[1]	Mi-qi Wang, Ze-hua Zhou, Lin-tao Wu, Ying Ding, Ze-hua Wang. Characterization and in-situ formation mechanism of tungsten carbide reinforced Fe-based alloy coating by plasma cladding [J]. International Journal of Minerals, Metallurgy and Materials, 2018, 25(4): 439-443. DOI: 10.1007/s12613-018-1589-4
[2]	Xiao Jin, Bao-qin Fu, Cheng-lu Zhang, Wei Liu. Strain localization and damage development in 2060 alloy during bending [J]. International Journal of Minerals, Metallurgy and Materials, 2015, 22(12): 1313-1321. DOI: 10.1007/s12613-015-1199-3
[3]	Jia-hua Liu, Lei Wang, Yang Liu, Xiu Song, Jiong Luo, Dan Yuan. Effects of H content on the tensile properties and fracture behavior of SA508-III steel [J]. International Journal of Minerals, Metallurgy and Materials, 2015, 22(8): 820-828. DOI: 10.1007/s12613-015-1139-2
[4]	Xiao-dong Wang, Huan Wang, Hong-xian Shen, Fa-xiang Qin, Da-wei Xing, Jing-shun Liu, Dong-ming Chen, Jian-fei Sun. Tensile properties and fracture reliability of a glass-coated Co-based amorphous microwire [J]. International Journal of Minerals, Metallurgy and Materials, 2014, 21(6): 583-588. DOI: 10.1007/s12613-014-0945-2
[5]	Yong-nan Chen, Jian-feng Wei, Yong-qing Zhao. Grain boundary characteristics and tensile properties of Ti14 alloy after semi-solid deformation [J]. International Journal of Minerals, Metallurgy and Materials, 2011, 18(5): 576-581. DOI: 10.1007/s12613-011-0480-3
[6]	Tong Wen, Li Wei, Xia Chen, Chun-lei Pei. Effects of ultrasonic vibration on plastic deformation of AZ31 during the tensile process [J]. International Journal of Minerals, Metallurgy and Materials, 2011, 18(1): 70-76. DOI: 10.1007/s12613-011-0402-4
[7]	Zhen-li Mi, Di Tang, Yong-juan Dai, Hai-tao Jiang, Jian-chong Lü. In-situ observation on the deformation behaviors of Fe-Mn-C TWIP steel [J]. International Journal of Minerals, Metallurgy and Materials, 2009, 16(6): 646-649. DOI: 10.1016/S1674-4799(10)60006-4
[8]	Yong Luo, Zhaowu Shen. Study on orientation fracture blasting with shaped charge in rock [J]. International Journal of Minerals, Metallurgy and Materials, 2006, 13(3): 193-198. DOI: 10.1016/S1005-8850(06)60042-X
[9]	Yong Yu, Chunyan Meng. 3-D distribution of tensile stress in rock specimens for the Brazilian test [J]. International Journal of Minerals, Metallurgy and Materials, 2005, 12(6): 495-499.
[10]	Jinxu Li, Yimin Zeng, Yanbin Wang, Wuyang Chu. In Situ Studies of Deformation and Fracture in Sputtering Copper Film [J]. International Journal of Minerals, Metallurgy and Materials, 2000, 7(1): 38-41.