[1] | Kaouther Zaara, Mahmoud Chemingui, Virgil Optasanu, Mohamed Khitouni. Solid solution evolution during mechanical alloying in Cu-Nb-Al compounds[J]. International Journal of Minerals, Metallurgy and Materials, 2019, 26(9): 1129-1139. doi: 10.1007/s12613-019-1820-y |
[2] | Xiu-ying Ni, Jun Zhao, Jia-lin Sun, Feng Gong, Zuo-li Li. Effects of metal binder on the microstructure and mechanical properties of Al2O3-based micro-nanocomposite ceramic tool material[J]. International Journal of Minerals, Metallurgy and Materials, 2017, 24(7): 826-832. doi: 10.1007/s12613-017-1466-6 |
[3] | Chuan Zhao, Chi Zhang, Wen-quan Cao, Zhi-gang Yang. Variation in retained austenite content and mechanical properties of 0.2C–7Mn steel after intercritical annealing[J]. International Journal of Minerals, Metallurgy and Materials, 2016, 23(2): 161-167. doi: 10.1007/s12613-016-1223-2 |
[4] | Jin-ru Luo, Ya-qiong Yan, Ji-shan Zhang, Lin-zhong Zhuang. Microstructure and mechanical properties of cryorolled AZ31 magnesium alloy sheets with different initial textures[J]. International Journal of Minerals, Metallurgy and Materials, 2016, 23(7): 827-834. doi: 10.1007/s12613-016-1297-x |
[5] | Wan-song Li, Hong-ye Gao, Zhong-yi Li, Hideharu Nakashima, Satoshi Hata, Wen-huai Tian. Effect of lower bainite/martensite/retained austenite triplex microstructure on the mechanical properties of a low-carbon steel with quenching and partitioning process[J]. International Journal of Minerals, Metallurgy and Materials, 2016, 23(3): 303-313. doi: 10.1007/s12613-016-1239-7 |
[6] | Gheorghe Gurau, Carmela Gurau, Vedamanickam Sampath, Leandru Gheorghe Bujoreanu. Investigations of a nanostructured FeMnSi shape memory alloy produced via severe plastic deformation[J]. International Journal of Minerals, Metallurgy and Materials, 2016, 23(11): 1315-1322. doi: 10.1007/s12613-016-1353-6 |
[7] | Behnam Rahimi, Hamed Khosravi, Mohsen Haddad-Sabzevar. Microstructural characteristics and mechanical properties of Al-2024 alloy processed via a rheocasting route[J]. International Journal of Minerals, Metallurgy and Materials, 2015, 22(1): 59-67. doi: 10.1007/s12613-015-1044-8 |
[8] | Pei Li, Jun Li, Qing-ge Meng, Wen-bin Hu, Chun-fu Kuang. Influence of rapid heating process on the microstructure and tensile properties of high-strength ferrite–martensite dual-phase steel[J]. International Journal of Minerals, Metallurgy and Materials, 2015, 22(9): 933-941. doi: 10.1007/s12613-015-1152-5 |
[9] | Lin-qing Xu, Dan-tian Zhang, Yong-chang Liu, Bao-qun Ning, Zhi-xia Qiao, Ze-sheng Yan, Hui-jun Li. Precipitation behavior and martensite lath coarsening during tempering of T/P92 ferritic heat-resistant steel[J]. International Journal of Minerals, Metallurgy and Materials, 2014, 21(5): 438-447. doi: 10.1007/s12613-014-0927-4 |
[10] | Ting-ting Zuo, Song-bo Ren, Peter K. Liaw, Yong Zhang. Processing effects on the magnetic and mechanical properties of FeCoNiAl0.2Si0.2 high entropy alloy[J]. International Journal of Minerals, Metallurgy and Materials, 2013, 20(6): 549-555. doi: 10.1007/s12613-013-0764-x |
[11] | Xin Lu, Li-hua Zhao, Lang-ping Zhu, Bin Zhang, Xuan-hui Qu. High-temperature mechanical properties and deformation behavior of high Nb containing TiAl alloys fabricated by spark plasma sintering[J]. International Journal of Minerals, Metallurgy and Materials, 2012, 19(4): 354-359. doi: 10.1007/s12613-012-0563-9 |
[12] | H. Gungunes, E. Yasar, M. Dikici. Effect of Si on austenite stabilization, martensite morphology, and magnetic properties in Fe-26%Ni-x%Si alloys[J]. International Journal of Minerals, Metallurgy and Materials, 2011, 18(2): 192-196. doi: 10.1007/s12613-011-0421-1 |
[13] | Hai-yan Yu, Li Bao. Flow stress model considering the transformation-induced plasticity effect and the inelastic strain recovery behavior[J]. International Journal of Minerals, Metallurgy and Materials, 2011, 18(2): 185-191. doi: 10.1007/s12613-011-0420-2 |
[14] | Shu-ping Tan, Zhen-hua Wang, Shi-chang Cheng, Zheng-dong Liu, Jie-cai Han, Wan-tang Fu. Hot deformation behavior of Super304H austenitic heat resistant steel[J]. International Journal of Minerals, Metallurgy and Materials, 2010, 17(2): 167-172. doi: 10.1007/s12613-010-0208-9 |
[15] | Shuang Kuang, Yong-lin Kang, Hao Yu, Ren-dong Liu. Stress-strain partitioning analysis of constituent phases in dual phase steel based on the modified law of mixture[J]. International Journal of Minerals, Metallurgy and Materials, 2009, 16(4): 393-398. doi: 10.1016/S1674-4799(09)60070-4 |
[16] | Xue-xia Xu, Yang Yu, Wen-long Cui, Bing-zhe Bai, Jia-lin Gu. Ultra-high cycle fatigue behavior of high strength steel with carbide-free bainite/martensite complex microstructure[J]. International Journal of Minerals, Metallurgy and Materials, 2009, 16(3): 285-292. doi: 10.1016/S1674-4799(09)60051-0 |
[17] | Huajian Li, Henghu Sun, Xuejun Xiao, Hongxia Chen. Mechanical properties of gangue-containing aluminosilicate based cementitious materials[J]. International Journal of Minerals, Metallurgy and Materials, 2006, 13(2): 183-189. doi: 10.1016/S1005-8850(06)60040-6 |
[18] | Guang Xu, Chushao Xu, Jiarong Zhao, Xianjun Liu. Research on flow stress in ferrite deformation of a Ti-IF steel[J]. International Journal of Minerals, Metallurgy and Materials, 2006, 13(1): 34-36. doi: 10.1016/S1005-8850(06)60010-8 |
[19] | Zonghai Ding, Pavel Huml. Influence of stress path change on the resistance to plastic deformation of cold rolled sheets[J]. International Journal of Minerals, Metallurgy and Materials, 2005, 12(6): 521-526. |
[20] | Lihua Xu, Fang Lian, Yuyan Guo, Qiang Zhen, Jose Maria Fonte Ferreira, Fuming Wang, Wenchao Li. Mechanical Properties and Erosive Wear Resistance of Zirconia Toughened Al2O3-TiC Ceramics[J]. International Journal of Minerals, Metallurgy and Materials, 2000, 7(2): 110-114. |