Wei Wu, and Liu Liu, Application of Al-free deoxidizer in rail steel manufacture, J. Univ. Sci. Technol. Beijing , 15(2008), No. 5, pp.534-537. https://dx.doi.org/10.1016/S1005-8850(08)60100-0
Cite this article as: Wei Wu, and Liu Liu, Application of Al-free deoxidizer in rail steel manufacture, J. Univ. Sci. Technol. Beijing , 15(2008), No. 5, pp.534-537. https://dx.doi.org/10.1016/S1005-8850(08)60100-0
Metallurgy

Application of Al-free deoxidizer in rail steel manufacture

Author Affilications
  • Because there are a lot of influences of alumina inclusions on the performance of rail steel,it is reasonable to adopt the deoxidization method with Al-free deoxidizer. According to the characteristics of Al-free deoxidization process,the control of aluminum content,the deoxidization with ladle furnace(LF) slag,the deoxidization process under vacuum by carbon,and the inclusions modification technology by calcium treatment were studied. All of them were applied to practical production. The results indicate that the adoption of Al-free deoxidization process leads to the total oxygen content in the steel below 20 ppm,which meets the requirement of clean rail steel.
  • Related Articles

    [1]Le-chen Zhang, Yan-ping Bao, Min Wang, Chao-jie Zhang. Variation and optimization of acid-dissolved aluminum content in stainless steel [J]. International Journal of Minerals, Metallurgy and Materials, 2016, 23(4): 408-416. DOI: 10.1007/s12613-016-1250-z
    [2]Wen-liang Dong, Hong-wei Ni, Hua Zhang, Ze-an Lü. Effect of slag composition on the cleanliness of 28MnCr5 gear steel in the refining processes [J]. International Journal of Minerals, Metallurgy and Materials, 2016, 23(3): 269-275. DOI: 10.1007/s12613-016-1235-y
    [3]Li-hua Zhao, Lu Lin, Qi-fan Wu. Experimental study on sulfur removal from ladle furnace refining slag in hot state by blowing air [J]. International Journal of Minerals, Metallurgy and Materials, 2016, 23(1): 33-39. DOI: 10.1007/s12613-016-1208-1
    [4]Hui-xiang Yu, Xin-hua Wang, Mao Wang, Wan-jun Wang. Desulfurization ability of refining slag with medium basicity [J]. International Journal of Minerals, Metallurgy and Materials, 2014, 21(12): 1160-1166. DOI: 10.1007/s12613-014-1023-5
    [5]J. Pal, S. Ghorai, M. C. Goswami, D. Ghosh, D. Bandyopadhyay, S. Ghosh. Behavior of fluxed lime iron oxide pellets in hot metal bath during melting and refining [J]. International Journal of Minerals, Metallurgy and Materials, 2013, 20(4): 329-337. DOI: 10.1007/s12613-013-0731-6
    [6]Shu-hao Chen, Min Jiang, Xiao-fei He, Xin-hua Wang. Top slag refining for inclusion composition transform control in tire cord steel [J]. International Journal of Minerals, Metallurgy and Materials, 2012, 19(6): 490-498. DOI: 10.1007/s12613-012-0585-3
    [7]Lu Lin, Yan-ping Bao, Feng Yue, Li-qiang Zhang, Hong-lin Ou. Physical model of fluid flow characteristics in RH-TOP vacuum refining process [J]. International Journal of Minerals, Metallurgy and Materials, 2012, 19(6): 483-489. DOI: 10.1007/s12613-012-0584-4
    [8]Fu-ping Tang, Zhen Li, Xiao-feng Wang, Ben-wen Chen, Peng Fei. Cleaning IF molten steel with dispersed in-situ heterophases induced by the composite sphere explosive reaction in RH ladles [J]. International Journal of Minerals, Metallurgy and Materials, 2011, 18(2): 144-149. DOI: 10.1007/s12613-011-0414-0
    [9]Bai-song Liu, Guo-sen Zhu, Huan-xi Li, Ben-hai Li, Yang cui, Ai-min Cui. Decarburization rate of RH refining for ultra low carbon steel [J]. International Journal of Minerals, Metallurgy and Materials, 2010, 17(1): 22-27. DOI: 10.1007/s12613-010-0104-3
    [10]Chuanji Han, Liqun Ai, Bosong Liu, Jun Zhang, Yanping Bao, Kaike Cai. Decarburization mechanism of RH-MFB refining process [J]. International Journal of Minerals, Metallurgy and Materials, 2006, 13(3): 218-221. DOI: 10.1016/S1005-8850(06)60046-7

Catalog

    Share Article

    Article Metrics

    Article views (251) PDF downloads (13) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return