Yanli Wang, Zhi Lin, Junpin Lin, and Guoliang Chen, Plastic equation of state determined by nano indentation, J. Univ. Sci. Technol. Beijing , 9(2002), No. 2, pp.135-137.
Cite this article as: Yanli Wang, Zhi Lin, Junpin Lin, and Guoliang Chen, Plastic equation of state determined by nano indentation, J. Univ. Sci. Technol. Beijing , 9(2002), No. 2, pp.135-137.
Materials

Plastic equation of state determined by nano indentation

Author Affilications
  • In order to characterize the plastic state of a deformed material, an indentation method to determine the plastic equation of state(PES) was developed. The work-hardening coefficient and the strain rate sensitivity coefficient of the plastic mechanic equation of state were determined by two kinds of indentation tests respectively. Therefore, the PES of materials under deformation can be obtained, and the plastic state of materials can be determined.
  • Related Articles

    [1]Jing-ling Zhang, Qian-ying Guo, Yong-chang Liu, Chong Li, Li-ming Yu, Hui-jun Li. Effect of cold rolling and first precipitates on the coarsening behavior of γ″-phases in Inconel 718 alloy [J]. International Journal of Minerals, Metallurgy and Materials, 2016, 23(9): 1087-1096. DOI: 10.1007/s12613-016-1326-9
    [2]Ying-hui Zhou, Chen-xi Liu, Yong-chang Liu, Qian-ying Guo, Hui-jun Li. Coarsening behavior of MX carbonitrides in type 347H heat-resistant austenitic steel during thermal aging [J]. International Journal of Minerals, Metallurgy and Materials, 2016, 23(3): 283-293. DOI: 10.1007/s12613-016-1237-9
    [3]Xue Yang, Lan Sun, Ji Xiong, Ping Zhou, Hong-yuan Fan, Jian-yong Liu. Effect of aging temperature on the microstructures and mechanical properties of ZG12Cr9Mo1Co1NiVNbNB ferritic heat-resistant steel [J]. International Journal of Minerals, Metallurgy and Materials, 2016, 23(2): 168-175. DOI: 10.1007/s12613-016-1224-1
    [4]Lei Wang, Yao Wang, Yang Liu, Xiu Song, Xu-dong Lü, Bei-jiang Zhang. Coarsening behavior of γ′ and γ″ phases in GH4169 superalloy by electric field treatment [J]. International Journal of Minerals, Metallurgy and Materials, 2013, 20(9): 861-866. DOI: 10.1007/s12613-013-0807-3
    [5]H. Gungunes, E. Yasar, M. Dikici. Effect of Si on austenite stabilization, martensite morphology, and magnetic properties in Fe-26%Ni-x%Si alloys [J]. International Journal of Minerals, Metallurgy and Materials, 2011, 18(2): 192-196. DOI: 10.1007/s12613-011-0421-1
    [6]Xue-xia Xu, Yang Yu, Wen-long Cui, Bing-zhe Bai, Jia-lin Gu. Ultra-high cycle fatigue behavior of high strength steel with carbide-free bainite/martensite complex microstructure [J]. International Journal of Minerals, Metallurgy and Materials, 2009, 16(3): 285-292. DOI: 10.1016/S1674-4799(09)60051-0
    [7]Yanli Lu, Zheng Chen, Yongxin Wang, Yongsheng Li. Microscopic phase-field simulation of the coarsening behavior of coherent precipitates in Ni-Al alloys [J]. International Journal of Minerals, Metallurgy and Materials, 2008, 15(2): 161-166. DOI: 10.1016/S1005-8850(08)60031-6
    [8]Yongsheng Li, Zheng Chen, Yungang Li, Yanli Lu, Yongxin Wang. Simulation of the precipitation process of Ni75AlxV25-x alloys incorporated in the microelasticity field [J]. International Journal of Minerals, Metallurgy and Materials, 2007, 14(1): 61-66. DOI: 10.1016/S1005-8850(07)60013-9
    [9]Baofeng Ding, Yinshun Wu, Bei Cao, Salih Hmida Abubakir, Jianhui Xie. Martensite transformation induced by deformation and its phase electrochemical behavior for stainless steels AISI 304 and 316L [J]. International Journal of Minerals, Metallurgy and Materials, 2002, 9(6): 437-440.
    [10]Benfu Hu, Quanmao Yu, Lin Lu, Chengchang Jia, Hiroshi Kinoshita, Heishichiro Takahashi. High temperature strength and ductility of the (C+N) strengthening Fe-Cr-Mn(W, V) steels [J]. International Journal of Minerals, Metallurgy and Materials, 2002, 9(4): 292-297.

Catalog

    Share Article

    Article Metrics

    Article views (230) PDF downloads (9) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return