CHEN Weiqing, ZHOU Rongzhang, HUH Wanwook, and RHEE Changhee, Investigation of Nickel Oxide Used for Alloying in BOF Steelmaking, J. Univ. Sci. Technol. Beijing , 4(1997), No. 1, pp.8-12.
Cite this article as: CHEN Weiqing, ZHOU Rongzhang, HUH Wanwook, and RHEE Changhee, Investigation of Nickel Oxide Used for Alloying in BOF Steelmaking, J. Univ. Sci. Technol. Beijing , 4(1997), No. 1, pp.8-12.

Investigation of Nickel Oxide Used for Alloying in BOF Steelmaking

Author Affilications
  • Direct alloying of nickel oxide in a hot simulator of LD converter was investigated in laboratory. Reduction rate of nickel oxide in steelmaking process was analyzed with the test results. Under the condition of lower slag viscosity, the reduction rate of NiO increases and the [Ni] yield rises. When the slag viscosity is higher, a lot of metal particles with higher Ni content are contained in the slag so as to decrease the [Ni] yield.
  • Related Articles

    [1]Hua-zhe Jiao, Shu-fei Wang, Ai-xiang Wu, Hui-ming Shen, Jian-dong Wang. Cementitious property of NaAlO2-activated Ge slag as cement supplement [J]. International Journal of Minerals, Metallurgy and Materials, 2019, 26(12): 1594-1603. DOI: 10.1007/s12613-019-1901-y
    [2]Juan-hong Liu, Yu-cheng Zhou, Ai-xiang Wu, Hong-jiang Wang. Reconstruction of broken Si–O–Si bonds in iron ore tailings (IOTs) in concrete [J]. International Journal of Minerals, Metallurgy and Materials, 2019, 26(10): 1329-1336. DOI: 10.1007/s12613-019-1811-z
    [3]Kichakeswari Tudu, Sagar Pal, N. R. Mandre. Comparison of selective flocculation of low grade goethitic iron ore fines using natural and synthetic polymers and a graft copolymer [J]. International Journal of Minerals, Metallurgy and Materials, 2018, 25(5): 498-504. DOI: 10.1007/s12613-018-1596-5
    [4]P. C. Beuria, S. K. Biswal, B. K. Mishra, G. G. Roy. Kinetics of thermal decomposition of hydrated minerals associated with hematite ore in a fluidized bed reactor [J]. International Journal of Minerals, Metallurgy and Materials, 2017, 24(3): 229-239. DOI: 10.1007/s12613-017-1400-y
    [5]Yong-sheng Sun, Yue-xin Han, Yan-feng Li, Yan-jun Li. Formation and characterization of metallic iron grains in coal-based reduction of oolitic iron ore [J]. International Journal of Minerals, Metallurgy and Materials, 2017, 24(2): 123-129. DOI: 10.1007/s12613-017-1386-5
    [6]Wen-tao Hu, Xin-wei Li, Hua-jun Wang, Chuan-yao Sun, Xu-qin Duan. Correlation between aggregation structure and tailing mineral crystallinity [J]. International Journal of Minerals, Metallurgy and Materials, 2014, 21(9): 845-850. DOI: 10.1007/s12613-014-0980-z
    [7]Yong-sheng Sun, Yue-xin Han, Peng Gao, Ze-hong Wang, Duo-zhen Ren. Recovery of iron from high phosphorus oolitic iron ore using coal-based reduction followed by magnetic separation [J]. International Journal of Minerals, Metallurgy and Materials, 2013, 20(5): 411-419. DOI: 10.1007/s12613-013-0744-1
    [8]Hua-jian Li, Heng-hu Sun. Microstructure and cementitious properties of calcined clay-containing gangue [J]. International Journal of Minerals, Metallurgy and Materials, 2009, 16(4): 482-486. DOI: 10.1016/S1674-4799(09)60084-4
    [9]Zhong-lai Yi, Heng-hu Sun, Xiu-quan Wei, Chao Li. Iron ore tailings used for the preparation of cementitious material by compound thermal activation [J]. International Journal of Minerals, Metallurgy and Materials, 2009, 16(3): 355-358. DOI: 10.1016/S1674-4799(09)60064-9
    [10]Xiaoguang Yang, Wen Ni, Xufang Zhang, Yali Wang. Effect of alkali-activation on aluminosilicate-based cementitious materials [J]. International Journal of Minerals, Metallurgy and Materials, 2008, 15(6): 796-801. DOI: 10.1016/S1005-8850(08)60290-X

Catalog

    Share Article

    Article Metrics

    Article views (274) PDF downloads (16) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return