Microstructure and strengthening parameters of ultra-thin hot strip of low carbon steel

Hao Yu; Yonglin Kang; Hongbo Dong

Volume 9 Issue 5

Oct. 2002

Turn off MathJax

Article Contents

Abstract

International Journal of Minerals, Metallurgy and Materials > 2002 > 9(5): 356-359.

Hao Yu, Yonglin Kang, and Hongbo Dong, Microstructure and strengthening parameters of ultra-thin hot strip of low carbon steel, J. Univ. Sci. Technol. Beijing , 9(2002), No. 5, pp.356-359.

Cite this article as:

Hao Yu, Yonglin Kang, and Hongbo Dong, Microstructure and strengthening parameters of ultra-thin hot strip of low carbon steel, J. Univ. Sci. Technol. Beijing , 9(2002), No. 5, pp.356-359.

Cite this article as:

Hao Yu, Yonglin Kang, and Hongbo Dong, Microstructure and strengthening parameters of ultra-thin hot strip of low carbon steel, J. Univ. Sci. Technol. Beijing , 9(2002), No. 5, pp.356-359.

PDF (951 KB)

Materials

Microstructure and strengthening parameters of ultra-thin hot strip of low carbon steel

Author Affilications

Material Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China

Funds:

This work is financially supported by the state foundation for key projects: Fundamental Research on New Generation of Steels (No: G1998061500).

Received: 13 January 2002; Available Online: 15 June 2021

Graphical Abstract

Abstract

Abstract

The microstructure and precipitation mechanism of ultra-thinhot strip produced by CSP technology were analyzed by electron back scattered diffraction (EBSD), H-800 transmission electron microscope (TEM) and thermodynamics theory. The EBSD results show that the finishing hot rolling microstructures are mixture of recrystallized and deformed austenite. After phase transformation, ferrite grains embody substructures and dislocations that led ultra-thin hot strip high strength and relatively low elongation rate. TEM observations show that there are a lot of fine and dispersive precipitates in microstructures. Most of aluminium nitrides are in grains, while coexisted precipitates of MnS along grain boundaries. Coexisted precipitates compose cation-vacancy type oxides such as Al₂O₃ in the core, while MnS at the fringe of surface. At the same time, reasons for microstructure refinement and strengthening effect were investigated.
- CSP,
- EBSD,
- microstructure,
- precipitation,
- strengthening

FullText(HTML)

References (0)

[1]	Tian-xing Lu, Cun-guang Chen, Zhi-meng Guo, Pei Li, Ming-xing Guo. Tungsten nanoparticle-strengthened copper composite prepared by a sol-gel method and in-situ reaction [J]. International Journal of Minerals, Metallurgy and Materials, 2019, 26(11): 1477-1484. DOI: 10.1007/s12613-019-1889-3
[2]	Xiang Zhao, Lei-chen Guo, Long Zhang, Ting-ting Jia, Cun-guang Chen, Jun-jie Hao, Hui-ping Shao, Zhi-meng Guo, Ji Luo, Jun-bin Sun. Influence of nano-Al₂O₃-reinforced oxide-dispersion-strengthened Cu on the mechanical and tribological properties of Cu-based composites [J]. International Journal of Minerals, Metallurgy and Materials, 2016, 23(12): 1444-1451. DOI: 10.1007/s12613-016-1368-z
[3]	Zhi-qiao Yan, Feng Chen, Fu-xing Ye, Dong-ping Zhang, Yi-xiang Cai. Microstructures and properties of Al₂O₃ dispersion-strengthened copper alloys prepared through different methods [J]. International Journal of Minerals, Metallurgy and Materials, 2016, 23(12): 1437-1443. DOI: 10.1007/s12613-016-1367-0
[4]	Wen-wen Mao, An-gang Ning, Han-jie Guo. Nanoscale precipitates and comprehensive strengthening mechanism in AISI H13 steel [J]. International Journal of Minerals, Metallurgy and Materials, 2016, 23(9): 1056-1064. DOI: 10.1007/s12613-016-1323-z
[5]	Xiao-pei Wang, Ai-min Zhao, Zheng-zhi Zhao, Yao Huang, Liang Li, Qing He. Mechanical properties and characteristics of nanometer-sized precipitates in hot-rolled low-carbon ferritic steel [J]. International Journal of Minerals, Metallurgy and Materials, 2014, 21(3): 266-272. DOI: 10.1007/s12613-014-0904-y
[6]	Wen-jun Ma, Yan-ping Bao, Li-hua Zhao, Min Wang. Control of the precipitation of TiN inclusions in gear steels [J]. International Journal of Minerals, Metallurgy and Materials, 2014, 21(3): 234-239. DOI: 10.1007/s12613-014-0900-2
[7]	Hao Yu, Yi Sun, Qixiang Chen, Haitao Jiang, Lihong Zhang. Precipitation behaviors of X70 acicular ferrite pipeline steel [J]. International Journal of Minerals, Metallurgy and Materials, 2006, 13(6): 523-527. DOI: 10.1016/S1005-8850(06)60106-0
[8]	Hao Yu, Yonglin Kang, Xueying Xiong, Kelu Wang, Jie Fu, Guijiang Chen, Liejun Li. Quantitative analysis on strengthening mechanism of ultra-thin hot strip of low carbon steel produced by CSP technique [J]. International Journal of Minerals, Metallurgy and Materials, 2004, 11(5): 425-427.
[9]	Yonglin Kang, Kelu Wang, Hao Yu, Jie Fu, Delu Liu, Zhongbing Wang, Xuewen Chen. Microstructure evolution and precipitation behavior of low carbon steel hot strips produced by CSP [J]. International Journal of Minerals, Metallurgy and Materials, 2004, 11(4): 364-367.
[10]	Jun Zhang, Dong Li. Precipitation of ordered α₂ phase in a near-α titanium alloy with duplex microstructure [J]. International Journal of Minerals, Metallurgy and Materials, 2002, 9(3): 202-205.