Viscosity estimation for slags containing calcium fluoride

Qifeng Shu; Jiayun Zhang

Jun. 2005

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2005 > 12(3): 221-224

Qifeng Shu and Jiayun Zhang, Viscosity estimation for slags containing calcium fluoride, J. Univ. Sci. Technol. Beijing, 12(2005), No. 3, pp. 221-224.

Cite this article as:

Qifeng Shu and Jiayun Zhang, Viscosity estimation for slags containing calcium fluoride, J. Univ. Sci. Technol. Beijing, 12(2005), No. 3, pp. 221-224.

Qifeng Shu and Jiayun Zhang, Viscosity estimation for slags containing calcium fluoride, J. Univ. Sci. Technol. Beijing, 12(2005), No. 3, pp. 221-224.

Citation:

Qifeng Shu and Jiayun Zhang, Viscosity estimation for slags containing calcium fluoride, J. Univ. Sci. Technol. Beijing, 12(2005), No. 3, pp. 221-224.

PDF( 361 KB)

Metallurgy

Viscosity estimation for slags containing calcium fluoride

Qifeng Shu and
Jiayun Zhang

+ Author Affiliations

Corresponding author:
Jiayun Zhang E-mail: zhjiayun@metall.ustb.edu.cn
Received: 3 September 2004

Abstract

Abstract

Based on recently published experimental data, the Riboud model was modified for viscosity estimation of the slags containing calcium fluoride. The estimated values were in good agreement with measured data. Reasonable estimation can be achieved using the modified Riboud model for mould fluxes and ESR (eletro slag remelting) slags. Especially for ESR slags, the modified Riboud model can provide much more precise values than the original Riboud model.
- slag;
- viscosity;
- calcium fluoride;
- mould fluxes;
- eletro slag remelting;
- estimation